Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
R4CB56
R
Bluetooth Rev. B
COVER.FM A5 size
10/29/02
®
User’s Guide
Copyright © 2003 by SEIKO EPSON CORPORATION, Nagano, Japan.
Printed in XXXX
xxxxxxx-00
xxx
L
R4CB56
Bluetooth Rev. B
BLUETOC.FM A5 size
10/29/02
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . 1
When using this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Names of Component Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting with/disconnecting from a printer . . . . . . . . . . . . . . . . 4
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disconnecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Set Bluetooth preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting items and values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up the Bluetooth Passkey (Bluetooth PIN). . . . . . . . . . 8
Print Settings and Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Print settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications of This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Profiles supported. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wireless Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . 13
Copyrights and Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
ii
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Safety Instructions
Before using this product, read all of the instructions in this
section and also refer to the documentation packed with your
printer.
Warnings, Cautions, and Notes
Warnings
must be followed carefully to avoid bodily injury.
w
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Cautions
must be observed to avoid damage to your equipment.
c
Notes
contain important information and useful tips on the operation of your
printer.
When using this product
Warning:
❏ Do not use this product near medical equipment.
w
Radio wave may adversely affect cardiac pacemakers and
electrical medical equipment. Do not use this product inside
medical facilities.
❏ Use this product at least 22 cm away from the region where
the cardiac pacemaker is implanted.
Radio wave may adversely affect the functionality of the
cardiac pacemaker.
❏ Do not use this product near automatically controlled devices
such as automatic doors and fire alarms.
Radio wave may adversely affect these devices, and may cause
accidents due to malfunctions.
❏ Do not disassembly or modify this product.
Doing so will cause injury, electric shock and/or fire.
1
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
About This Product
This product is a wireless communication module used to print
from digital cameras and other devices with Bluetooth™ wireless
technology without cables when connected with EPSON printers.
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
1. Execute printing from
a device with Bluetooth
wireless technology.
The illustration above shows an image.
Note:
❏ While compatible with the Bluetooth wireless technology standard,
this product has not been confirmed to be compatible with all
products enabled with Bluetooth wireless technology. Further, this
product cannot be guaranteed to work when connected with other
products that are enabled with Bluetooth wireless technology.
❏ To obtain technical support, refer to the documentation attached to
the printer.
2. Print from a printer.
❏ Although the wireless communication range of this product is
approximately 10 meters, this may vary depending on conditions
including obstacles between the communication devices, the
electromagnetic signal quality, magnetic fields, static electricity and
electromagnetic interference, software used, operating system,
reception sensitivity of communicating devices, and antenna
performance.
2
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
About Profiles
Profiles are standards for Bluetooth wireless communication.
Multiple profiles are defined according to the features and
purpose of each product. To perform Bluetooth wireless
communication, the communicating devices must have mutually
compatible profiles.
Note:
The profiles that can be used with this product are Basic Imaging Profile
(BIP) and Hardcopy Cable Replacement Profile (HCRP). This product
cannot communicate with products with Bluetooth wireless technology
that cannot use BIP and HCRP.
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Names of Component Parts
Light
It is on when Bluetooth wireless
communication can be performed.
It flashes during data reception.
Connector
Insert this product into the Bluetooth
port in the rear of the printer.
3
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
Connecting with/disconnecting from a
printer
Connecting
1. Turn off the printer power.
Caution:
Do not connect while the printer power is on. Doing so may
c
cause the printer to malfunction.
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
2. Insert this product into the Bluetooth port in the rear of the
printer.
3. Turn on the printer power.
The power light comes on.
4
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Disconnecting
1. Turn off the printer power.
Verify that the LCD panel display goes off.
c
2. Remove this product from the Bluetooth port in the rear of the
printer by holding the sections as shown in the figure below.
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
Caution:
Do not disconnect this product while the printer power is on.
Doing so may cause the printer to malfunction.
R
Caution:
Do not remove this product by holding its upper section.
c
Doing so may damage the product.
5
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
Set Bluetooth preferences
Set the preferences for Bluetooth on the printer’s LCD panel.
Setting items and values
The items and values of the preferences for Bluetooth set on the
LCD panel are as follows.
Setting item Setting value Description
Printer ID Printer name-Any
number from 0
through 9
(Default value: 1)
Connectivity Public/Private/
Bonding
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
If there are multiple printers within a
range where Bluetooth wireless
communication is possible, printers
can be identified by assigning a printer
ID to each printer.
Printer ID settings will take effect when
the printer power is turned off once
and then on again.
Public This mode allows
search and
printing from
devices with
Bluetooth wireless
technology.
Private This mode
prohibits search
from devices with
Bluetooth wireless
technology.
To print, it is
therefore
necessary to
search for this
product in Public
mode first.
Bonding This mode
requires a
Bluetooth Passkey
to search and
print from devices
with Bluetooth
wireless
technology.
6
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Encryption On/Off (Default
setting: Off)
Passkey Any 4-digit
number (Default
value: 0000)
Device
Address
(Example)
11-11-11-11-11-11
The content of communication can be
encrypted. The entry of a Bluetooth
Passkey is required for encryption.
If a Bluetooth Passkey (any 4-digit
number) is set as the Passkey setting, it
must always be entered on a digital
camera or other device before
printing. This is used to prevent
interference from other products with
Bluetooth wireless technology.
To use a Bluetooth Passkey, select
Bonding in Connectivity.
Displays the unique Bluetooth
communication address of this
product. If it is necessary to enter the
device address of this product on
another device that will communicate
with this product, communication may
not be possible if the device address
displayed here is entered. If that
happens, contact EPSON.
Settings
1. Connect this product with your printer. For connecting the
unit, refer to “Connecting with/disconnecting from a printer”
on page 4.
Caution:
Be sure to connect this product after turning off the printer
c
power. If this product is connected while the printer power is
on, the printer may malfunction.
7
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
2. Press the d or u button to select Advanced Settings, and
then press , button.
3. Select a setting item with d or u, and then change its setting
value. Refer to “Setting items and values” o n p ag e 6 f o r s et t in g
items and values.
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Note:
If you are not sure of the LCD panel operating procedure, refer to the
User’s Guide that comes with your printer.
Setting up the Bluetooth Passkey (Bluetooth PIN)
Once you set up a Bluetooth Passkey, the entry of a Bluetooth
Passkey is always required on devices with Bluetooth wireless
technology.
The default value has been set to 0000.
8
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
1. Select Passkey with d or u, and then press , button.
2. Select a number for the first digit with d or u, and then press
, button.
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
3. Select a number for the second through fourth digits in the
same manner, and then press , button.
When Apply appears, press , button to apply the Bluetooth
Passkey.
9
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
This example sets “1234.”
Note:
Press - button to go back to the previous digit.
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Print Settings and Printing
Perform print settings and printing on the printer’s LCD panel or
a device that sends printing data to the printer.
Print settings
The items that can be set on the printer’s LCD panel and those
that can be set on the device sending print data vary with the
profile used.
Note:
The setting items and their values on the device sending print data vary
with the device used. For more information, refer to the user’s manual
of the device used.
10
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Print settings when using Basic Image Profile
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Settings LCD panel
Setting
Print Mode No setting required Set to One.
Paper Type Enable Disable
Quality Enable Disable
Paper Size Enable Disable
Layout Enable Disable
Copies Enable Disable
Select Photo Disable Enable
Device Setting Remarks
Print settings when using Hardcopy Cable Replacement
Profile
Settings LCD panel
Setting
Print Mode Disable Enable Prints according
Paper Type
Quality
Paper Size
Layout
Device Setting Remarks
to the settings of
the device that
sends print data.
Copies
Select Photo
Note:
If data was printed using Hardcopy Cable Replacement Profile (HCRP),
the size of the data increases. Therefore, it takes longer to print.
Printing
For information about how to print from a digital camera or other
device with Bluetooth wireless technology, refer to the user’s
manual that comes with the device as well as the user’s manual
that comes with your printer.
11
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
Specifications of This Product
Bluetooth Unit C824✽✽✽
Note:
The asterisk is a substitute for the last digit of the product number, which
varies by location.
Basic specifications
Communication system Bluetooth Standard Version 1.1
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Output Bluetooth Standard Power Class 2
Communication distance Line-of-sight distance: Approximately 10 m
Operating frequency
band
Profiles supported
Basic Imaging Profile
Hardcopy Cable Replacement Profile
(*This may vary depending on various
conditions including obstacles between the
communication devices, the
electromagnetic signal quality, magnetic
fields, static electricity and electromagnetic
interference, software used, operating
system, reception sensitivity of
communicating devices, and antenna
performance.)
2.4GHz bandwidth (2.400 GHz - 2.4835 GHz)
12
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Wireless Regulatory Information
The device must be used instrict accordance with the instructions
as described below.
For European Users
This product conforms to CE marking requirements in
accordance with the R & TTE directive 1999/5/EC.
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommended
modification of the product.
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Für europäische Anwender
Pour les utilisateurs européens
Only indoor operation is permitted in France.
Para usuarios europeos
Per gli Utilizzatori della Comunità Europea
License required for use in Italy.
Para Utilizadores Europeus
13
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/2 9/ 02
For No rth America Users
USA
This product conforms to part 15 of the FCC rules.
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommend ed
modification of the product.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Proof Sign-of f:
M.Yamad a CRE Kawakam i
J.Miyakoshi
ed itor nam e
CANADA
This product conforms to IC, Low Power Licence-Exempt
Radio communication Devices (RSS-210).
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommend ed
modification of the product.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
14
L
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/2 9/ 02
FCC Part 15 Subpart B Class B
NOTICE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Proof Sign-of f:
M.Yamad a CRE Kawakam i
J.Miyakoshi
ed itor nam e
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
15
Proof Sign-of f:
M.Yamad a CRE Kawa kam i
J.Miyakoshi
ed itor na me
Copyrights and Trademarks
All rights reserved. No part of this publication may be repr oduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopyi ng,
recording, or otherwise, without the prior wr itten permission of SEIK O EPSON
CORPORAT ION . The infor mation contain ed herein is design ed only for use w ith this EPSON
prin ter. EPSON is not responsible for any use of th is information as appl ied to other pri nters.
Neither SEIKO EPSON CORPORATION nor its affili ates shall be liable to the purchaser of
this product or third par ties for damages, losses, costs, or expenses incurred by the purchaser
or third part ies as a result of accident, misuse, or abuse of this product or unauthori zed
modifications, repairs, or alterations to this product, or (excludin g the U.S.) failure to strictly
comply wi th SEIKO EPSON CORPORATION 's operating and maintenance instructions.
SEIK O EPSON CORPORATI ON shall n ot be liable for any damages or problem s ari sing fro m
the use of any options or any consumable products other than those designated as Origi nal
EPSON Products or EPSON Appr oved Products by SEIKO EPSON CORPORATION.
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/0 2
R
SEIKO EPSON CORPORATION shall not be held liable for any damage resulting fro m
electr omagnetic interference that occurs from the use of any interface cables other than those
designated as EPSON Appr oved Products by SEIKO EPSON CORPORATION .
EPSON is a registered trademark and EPSON Stylus is a tr ademark of SEIKO EPSON
CORPORATION.
The BLUETOOTH tr ademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to
SEIK O EPSON CORPORATION.
General Noti ce: Other product names used her ein are for identification purposes only and
may be trademarks of their respective owners. EPSON di sclai ms any and all righ ts in those
marks.
Copyright © 2003 by SEIKO EPSON CORPORATION , Nagano, Japan.
16
Loading...