18
WATCH OPERATION
MULTI-HAND CALENDAR
SEIKO SERIES SUK (5Y85)
FEATURES
N Hour, Minute and Second Hand
N Day indicator
N 31 day calendar display
N 12/24 hour display(s)
HOW TO SET TIME AND DAY:
• Unscrew the crown (if screwdown type)
and pull out to the second click position.
• Turn the crown clockwise to advance hour and minute hands
until day hand is set to the desired day of the week.
• Once the desired day is indicated, continue to turn the crown
to set the hour and minute hands to the desired time
taking AM and PM into account (24-hour sub-dial).
• Push the crown back into the original position. The watch immediately starts ticking.
• Screw in crown (if screwdown type).
ADVANCED SETTING TECHNIQUES:
1. To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the point the day changes
(between 11:00 p.m. and 4:00 a.m.) and then advance them again until the day hand is set to the next.
a. The day hand will not move back by turning the crown counterclockwise.
2. After the day hand reaches the last day of the week, turn the crown clockwise and the hand will return to the first day of the week.
3. When adjusting the day hand, turn the crown slowly.
4. The 24-hour hand moves correspondingly with the hour hand.
5. When setting the hour hand, check that the 24-hour hand is correctly set.
6. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.
CALENDAR ADJUSTMENT:
• Pull crown out to first click position.
• Turn clockwise to set date hand to the desired date.
• Push crown back to normal position.
Note:
Do not set the date hand between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
While setting the date hand, check that it moves properly in one-day increments.
It is necessary to adjust the date at the end of February and 30-day months.
WATCH OPERATION
Position of sub dials may vary.