Seiko SQ-50V User Manual

QUARTZ METRONOME

SQ50V

NAMES AND FUNCTIONS OF PARTS

Power switch

• Slide the switch to turn ON/OFF power.

• Changes over tempo sound between "S1" and "S2" in
metronome mode.

• Changes over reference note between "A4" and "B
in

reference note generation mode.

Setting dial
Turn dial to set indicator to desired tempo speed or
reference note.

Reference note mark (A4/B

Set setting dial to this mark to generate reference note.

LED tempo display

The red LED flashes to the tempo you have set.

Speaker

It gives out tempo sound and the reference note.

Volume dial

It adjusts volume of tempo sound and reference note.

Earphone jack

Insert earphone plug into it to use with earphone.

Prop-up stand

♭4)

HOW TO USE

● Metronome Mode

• Set indicator of setting dial   to desired tempo speed.

• Slide power switch   to S1 or S2 to select desired
tempo sound.

● Reference Note Generation Mode

• Set indicator of setting dial to reference note mark .

• Slide power switch to A4 or B
reference note.

* The reference note generation mode is useful for tuning

musical instruments.

♭4 to select desired

HOW TO INSTALL THE BATTERY

Slide battery hatch in direction of arrow in the illustration,
and remove it.
Connect dry battery with battery plug, checking that (+) and
(-) terminals are correctly connected.

* Be sure to use a specified 9V dry battery (6F22) only.
* Before changing battery, check that metronome is turned off.
* When battery nears its end, the metronome may not work properly.

Replace the battery with a new one immediately.

* The battery included with your metronome when it was purchased

is a monitor battery, and may not last as long as specified.

* When disposing of old battery, observe the regulations of

authorities concerned.

♭4"