Seiko PULSAR V041, PULSAR V011, V041, V011 User Manual
CAL. V011, V041
ALARM CHRONOGRAPH
●Analogue time and digital time/calendar
●Regular alarm
●Stopwatch
●Illuminating light (for Cal. V011)
1
DISPLAY AND CROWN/BUTTONS
B
Pulsar
QUARTZ
CROWN
A
● With each press of button A, the digital display changes as follows:
TIME/CALENDAR
SETTING display
➮
➮
➮
2
ALARM display
STOPWATCH display
➮
CALENDAR display
➮
TIME display
SCREW DOWN CROWN
[for models with screw down crown]
Unlocking the crown
1 Turn Crown counterclockwise until you no
longer feel the threads turning.
2 Crown can be pulled out.
Locking the crown
1 Push Crown back in to normal position.
2 Turn Crown clockwise while pressing it lightly
until tight.
3
B
A
✽ Selection of the digits
TIME/CALENDAR
SETTING display
4
DIGITAL TIME/CALENDAR SETTING
Press to show TIME/CALENDAR
A
SETTING display.
▲
▲
Select the digits to be adjusted.✽
➾
Month
B
▲
Set the flashing digits.
A
▲
Press to show TIME/CALENDAR
B
SETTING display.
▲
Press to show CALENDAR display.
A
Date
➾
12-/24-hour indication
➾
Pulsar
QUARTZ
➾ Seconds ➾ Minutes ➾ Hour
➾
Day
➾
ANALOGUE TIME SETTING
● Be sure to set the digital time first before setting the analogue time.
CROWN
Pulsar
QUARTZ
1
3
1 Pull out when Second hand is at the
12 o’clock position.
2
2 Turn to set Hour and Minute hands.
3 Push back when the seconds in the
digital time display count “00”.
ILLUMINATING LIGHT (for Cal. V011)
● The illuminating light is activated by continuously pressing button B in the TIME
or CALENDAR display.
* The light intermittently illuminates the display to save the energy of the battery, and
this is not a malfunction.
5
Loading...