Seiko PULSAR 7T32, Y182, 7T32 User Manual

CAL. Y182, 7T32
ALARM CHRONOGRAPH
TIME/CALENDAR
Hour & minute hands with small second hand Date displayed in numerals
ALARM
Can be set on a 12-hour basis with small alarm hands.
Measures up to 30 minutes in 1/5 second increments.
TACHYMETER
For models with tachymeter scale
ENGLISH
English
Second hand
STOPWATCH
minute hand
Hour hand
(MAIN TIME)
(MAIN TIME)
DISPLAY AND CROWNS/BUTTONS
There are three buttons and two crowns.
B
STOPWATCH 1/5-second hand
Minute hand (MAIN TIME)
A
a b c
a b c
CROWN 1
C
ALARM hour hand
2
a: Normal position c: Second click
b: First click
ALARM minute hand
CROWN 2
Date
SCREW DOWN CROWN
[for models with screw down crown]
Unlocking the crown
1 Turn Crown counterclockwise until you no
longer feel the threads turning.
2 Crown can be pulled out.
Locking the crown
1 Push Crown back in to normal position. 2 Turn Crown clockwise while pressing it lightly
until tight.
English
3
English
4
Date
5
6
DATE SETTING
1
CROWN 1
3
4
CROWN 1
1 Pull out to first click.
2 Turn clockwise until the date for
2
the previous day appears.
3 Pull out to second click and turn
until the desired date appears.
4 Push back in to normal position.
Hour
hand
Minute hand
Second hand
TIME SETTING
1
3
CROWN 1
CROWN 1
1 Pull out to second click when
Second hand is at the 12 o’clock position.
2 Turn to set Hour and Minute
2
hands.
3 Push back in to normal position
in accordance with a time signal.
English
5
ALARM
Alarm time is set on a 12-hour basis and indicated by ALARM hour and minute hands that move independently of MAIN TIME hands.
ALARM SETTING
1 Adjustment of ALARM hands
After the main time is adjusted, follow the procedure below, and then set the alarm.
* The following procedure is necessary only after the main time is adjusted.
(MAIN TIME)
English
ALARM hands
6
Hour hand
Minute hand (MAIN TIME)
CROWN 2
1
3
CROWN 2
1 Pull out to second click.
2 Turn to set ALARM
hands to the current time (MAIN TIME).
2
3 Push back in to normal
position.
Loading...
+ 14 hidden pages