Seiki SC-172AU7BM User Manual

172L

BOTTOM MOUNT

REFRIGERTOR

SC-172AU7BM

INSTRUCTION

MANUAL

Please read this manual carefully before using, and keep it for future reference.

CONTENTS

General Safety 4

Product Overview 8

Installation 9

Operation 10

Troubleshooting 11

Specifications 12

Customer Helpline 12

GENERAL SAFETY

IMPORTANT INFORMATION

Read this manual thoroughly before you start using the bottom Mount Refrigerator.

The safety precautions instructions reduces the risk of fire, electric shock and injury when cor­rectly complied to.

Please follow all instructions and take notice of all warnings.

Pay close attention to messages that follow this safety alert symbol
or the words DANGER, WARNING or CAUTION. These words will be
used to alert you of potential hazards that and injure you and others.
Following these instruction will tell you how to reduce the chance of
injury and the possible dangers if instructions aren’t followed.

This symbol alerts you to take care as the appliance contains flammable
materials: isobutane as refrigerant and cyclopentane as insulation
blowing gas. Do not expose it to high heat, sparks and open flames.

The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the
appliance, a gas with a high level of environmental compatibility, which is flammable.
During transportation and installation of the appliance, make sure that none of the
components of the refrigerant circuit become damaged.

WARNING: Never use an appliance with a damaged refrigerant circuit. If the

refrigerant circuit becomes damaged, avoid proximity to open fires and all types
of heat and ignition sources. Thoroughly ventilate the room in which the appliance
is located.

It is dangerous for anyone other than an authorised service person to work on this
appliance. In Queensland, the authorised service person MUST hold a Gas Work
Authorisation for hydrocarbon refrigerants to carry out servicing or repairs which
involve the removal of covers.

The room for installing the appliance must be at least 1m³ per 8g of refrigerant.
The amount and type of refrigerant in the appliance can be found in the Technical
Specifications at the back of the manual and on the appliance rating label.

4