SEIKI LC55TD5 User Manual

Download

Page 1

Flat Panel

LCD Television

LC-55TD5

Instruction Manual

S E R I E S

Read all of these instructions carefully before using this television. Keep these instructions in a safe place for future reference.

Page 2

Page 3

English

IMPORTANT INFORMATION

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.

The exclamation point within an equilateral triangle is interded to presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.

aler the user to the

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions.

Important Safety Instructions

Note:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

amplifiers) that produce heat.

provided for your safety. If the provided

Page 4

IMPORTANT INFORMATION

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments / accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain

.Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be

15 placed on the apparatus.

16.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

17.Mains plug or appliance coupler is used

or moisture, does not operate normally, or has been dropped.

as the disconnect device, shall be readily operable.

with the apparatus.

English

Page 5

Screws:9xMB5X10

Page 6

the Westinghouse Customer Service.

Page 7

English

SAFETY PRECAUTIONS

Keep the TV dry and away from humidity.

Keep the TV away from heat sources

Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV.

Only clean the TV with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those

suggested by lead to electric shocks, short-circuits, fire or other incidents.

the manufacturer. Using inadequate spare parts can

Unplug the TV during lightning storms or when unused for long periods

of time.

Page 8

CONTENTS

1 2 3

4 5 6

7 8 9

PICTURE SOUND SLEEP DISPLAY

VOL+

MUTE

VOL-

EXIT

ENTER

MTS

ASPECT

CONTENTS

INPUT

CH+

CH-

FAV

Page 9

OVERVIEW

6. OVERVIEW

INPUT

Blue when TV is powered on. Red when TV is powered off. No color when power switch is turned off.

USB

(SERVICE)

AC IN and POWER SWITCH

(Shared audio with AV IN)

TUNER

POWER SWITCH

Page 10

into AC IN

below.

Make sure the power switch is turned on, which is located at the back of the TV.

TUNER

Page 11

INPUT

TUNER

INPUT

Page 12

TV PC

the INPUT

TUNER

Page 13

USB

(SERVICE)

TUNER

USB

(SERVICE)

TUNER

Page 14

INPUT

1 2 3

4 5 6

7 8 9

PICTURE SOUND SLEEP DISPLAY

VOL+

VOL-

EXIT

MUTE

CH+

CH-

INPUT

PICTURE

Select the picture mode

SOUND

Select the sound mode

SLEEP

Set the Sleep Timer.

Displays

ENTER

MTS

ASPECT

Displays

FAV

set

Page 15

Page 16

MENU OPERATION

Enter.

Time Zone

Use the Left and Right arrow to select your time zone. Use

Down arrow to select Next, then press Enter.

Time Zone

, then press

Please follow the Setup Wizard to scan and store channels.

You can perform the scan later if you choose to skip.

To scan now, press Enter.

Use Up and Down arrows to select channel scan source, then press Enter.

Page 17

Use Up and Down arrows to select channel scan source, then press Enter.

Are you Using a Cable/Satellite Box to connect your TV?

Use Up and Down arrows to make selection, then press Enter.

Use the Left and Right arrows to select the input source of your cable/satellite box. Use Down arrow to select Next, then press Enter.

RF (TV Tuner input) is not recommended due to its poor quality analog signal. Use Down arrow to select Back and choose a higher quality input source. If you do not have a high definition output, contact your cable/satellite provider for additional information. Or, press Enter to proceed.

Page 18

INPUT

Page 19

For TV Mode:

Page 20

MENU OPERATION

Color

Press ▼/▲ button to select Color,

Color

then press ◄/► button to adjust.

Sharpness

Press ▼/▲ button to select Sharpness, then press ◄/► button to adjust.

Tint

Press ▼/▲ button to select Tint, then press ◄/► button to adjust.

Tint

Screen Settings

1.Press ENTER when the Screen Settings item is highlighted. Then you will go to the sub-menu as following.

2.Press to select the desired menu item. Press ENTER to proceed if necessary▼/▲.

3.Press ◄/► to adjust the item to the desired level.

4.When you have changed the settings, you

can exit from the menu by pressing MENU.

English

SCREEN SETTINGS

Screen Size Standard

Auto Wide

:Return

:Select Menu

:Change Setting

Screen Size

Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size: Standard, Fill, Over, Scan.

Auto Wide

Press ▼/▲button to select the item Auto Wide, then press ENTER button to adjust. It can set the picture to fit the screen automatically. When the Auto Wide is selected, the symbol will show as:

SCREEN SETTINGS

Screen Size(N/A) Standard

Auto Wide

:Return

:Select Menu :Enable/Disable

ENTER

Page 21

120 Hz

Page 22

SOUND MENU

SOUND

Sound Settings

Surround Mode

Analog Sound Stereo

Digital Sound English

Other Settings

Equalizer Settings

MENU OPERATION

English

:Return

:Select Menu :Go to Next Menu

ENTER

Sound Settings

1.Press ENTER when the Sound Settings item is high lighted. Then you will go to the sub-menu as following.

2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.

3.Press ◄/► to the desired level.

4.When you have changed the settings, you can exit from

SOUND SETTING

Sound Mode User

Bass

Treble

Balance

the menu by pressing MENU.

:Return

:Select Menu

:Change Setting

Sound Mode

Press ▼/▲button to select the item Sound Mode, then press ◄/► button to adjust. Only in the User mode, the detail optionsas following can be adjusted. Available Sound Mode: User, Dynamic, Standard, Soft.

Bass

Press ▼/▲ button to select the item Bass, then press ◄/► button to adjust.

Treble

Press ▼/▲ button to select the item Treble, then press ◄/► button to adjust.

Balance

Press ▼/▲ button to select the item Balance, then press ◄/► button to adjust.

Page 23

MENU OPERATION

English

Bass

Tr eble

Balance

Surround Mode

Press ▼/▲ button to select the item Surround Mode, then press OK button to adjust. It can set the picture to fit the screen automatically. When the Auto Wide is selected, the symbol will show as following:

Surround Mode

Analog Sound

Press ▼/▲ button to select the item Preferred Analog Sound, then press ◄/► button the prefer audio when switching to an analog channel. Available Analog Sound: Stereo, Mono,SAP.

Digital Sound

Press ▼/▲ button to select the item Preferred Digital Sound , then press ◄/► button to select the prefer audio when switching to a digital channel. Available Digital Sound: English, French, Spanish.

to select

Other Settings

OTHER SETTINGS

AVL Off

Sepeaker On

Digital Audio Output Dolby Digital

:Return

:Select Menu :Enable/Disable

Page 24

MENU OPERATION

AVL

Press ▼/▲ button to select the item AVL, then press ◄/► button to select ON or OFF. Auto Volume Level can set the volume automatically adjust corresponding to the input audio.

Speaker

Press ▼/▲ button to select the item Speaker, then press ◄/► button to select ON or OFF. If set to Off, the speaker will be mute.

Digital Audio Output

Press ▼/▲ button to select the item Digital Audio Output, then press ◄/► button to select the desired digital audio output. Available digital audio output: Dolby Digital, Off, PCM.

Equalizer Settings

EQUALIZER SETTINGS

Mode OFF

0(N/A)

0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A)

100

250 500 1K 2K

10K

English

:Return

:Select Menu :Change Setting

Equalizer Mode

Press ▼/▲ button to select the item Equalizer Mode, then press ◄/► button to select the desired mode. Available Equalizer Mode: OFF, ROCK, POP, JAZZ, User.

CHANNEL MENU

Note: This menu is only shown when the input source is TV.

CHANNEL

Channel List

Favorite List

Channel Setting

Signal Typ e Air

Auto Channel Search Enter

:Return

:Select Menu :Go to Next Menu

Page 25

MENU OPERATION

Channel List

Press ▼/▲ button to select Channel List, then press OK button to scan the Channel List. If you select the option “In Channel List” On, the channel label will display in the list.

English

Page 1/ 1

ENTER

:Se lect Cha nn el

:Return

Channel List

No Channels Present Please Perform Channel Search First

:Select Menu

:Page

Favorite List

Press ▼/▲ button to select Favorite List, then press OK button to scan the Favorite Channel List.

FAVORITE LIST

No Favorite Channels Present Please Perform Favorite Channel Add First

Page 1/ 1

:Return

:Select Menu

:Page

ENTER

:Se lect Cha nn el

Channel Setting

Press ▼/▲ button to select Manual Channel Setting, then press OK button to set the value in the sub menu.

Signal Type

Press ▼/▲ button to select Signal Type, then press ◄/► button to select the type you want to set. There are two selections: Air and Cable.

CHANNEL SETTING

No Channels Present Please Perform Channel Search First

:Return

:Select Menu

:Se lect Cha nn el

Page 26

MENU OPERATION

Auto Channel Search

Press ▼/▲ button to select Auto Channel Search, then press OK button to search channel.

A Channel Search Menu will appear as below.

PARENTAL CONTROL

Lock Parental Control

V-CHIP(N/A)

Change Password(N/A)

Pront

Panel Lock(N/A)

Source Lock(N/A)

AUTO CHANNEL SEARCH-Air

Now Searching...Please Wait...

Return

Analog Channels Found: 0

Digital Channels Found: 0

92%

PARENTAL CONTROL

Lock Parental Control(N/A)

V-CHIP

Change Password

Front

Panel Lock

Source

Lock

English

:Return

DIGITAL

:Enter password

:Return

:Select Menu :Go to Next Menu

ENTER

Input password to enter,default password is‘‘0000’’.

V-CHIP

Press ▼/▲ button to select V-CHIP, then press OK button to adjust. A sub menu w ill appear as below.

V-CHIP

US V-Chip

Canada V-Chip

Block UnRated Show

Downloadable Rating(N/A)

Clear Downloadable Date(N/A)

:Return

:Select Menu :Go to Next Menu

ENTER

Page 27

English

MENU OPERATION

US V-CHIP

Press ▼/▲ button to select US V-CHIP, then press OK button to adjust. A sub menu will appear as below.

USA

Movie Rating

TV Rating

:Select Menu

:Return

ENTER

:Go to Next Menu

Movie Rating

Press ▼/▲ button to select Movie Rating, then press OK button to adjust. A sub menu will appear as below.

Movie Rating

PG-13

NC-17

ENTER

:Select

:Lock/Unlock

Press ▼/▲ button to select Rating, then press OK button to lock.

TV Rating

Press ▼/▲ button to select TV Rating, then press OK button to adjust. A sub menu will appear as below.

TV Rating

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

:Select

D L S V FV

ENTER

:Lock/Unlock

Press ▼/▲/◄/► button to select Rating, then press OK button to lock.

Page 28

MENU OPERATION

CANADA V-CHIP

Press ▼/▲ button to select US V-CHIP, then press OK button to adjust. A sub menu will appear as below.

CANADA

:Return

English Rating

French Rating

:Select Menu :Go to Next Menu

ENTER

French Rating

8ans

13ans+

16ans+

18ans+

English Rating

14+

:Return

English

ENTER

:Select

:Lock/Unlock

:Return

:Select

ENTER

:Lock/Unlock

The operation of CANADA V-CHIP is the same as the operation of US V-CHIP.

Block UnRated Show

Press ◄ / ► button to select Block UnRated Show, then press OK button to set the rating locked.

Downloadable Rating

Press ▼ / ▲ button to select Downloadable Rating, then press OK

button to set the rating.

If the DTV program doesn’t have this rating information, this option will be in gray.

Clear Downloadable Date

Press ▼ / ▲ button to select Clear Downloadable Data, then press OK button to set the rating. Note: The above two operation only valid when playing the downloadable data stream.

operations are the same as US V-CHIP.

The

CHANGE PASSWO RD

Press ▼ / ▲ button to select Change Password, then press OK button to adjust the value. A Sub Menu Will appear as below. If the password is changed, all of the passwords in the menu will be changed at the same time.

Page 29

MENU OPERATION

Note: If you forget your password, you can use “1470” to enter any menu locked.

Change Password

English

Old PIN

New PIN(N/A)

Confirm(N/A)

ENTER

:Return

DIG ITAL

:Password

Source Lock

Press ▼/▲ button to select Source Lock, then press OK button to enter the sub menu. Press ▼/▲ button to select Source, then press OK button to set the Source Lock . You can’t enter the locked source if you set the Source lock.

Source Lock

YPbPr1

YPbPr2

HDMI1

HDMI2

HDMI3

Page1/2

:Return

:Select

:Page

ENTER

Setup Menu

SETUP

Closed Caption

Menu Language English CLOCK

:Return

:Select Menu :Go to Next Menu

ENTER

:On/Off

Page 30

MENU OPERATION

Closed Caption

Press ▼/▲ button to select the item Closed Caption, then press ◄/► button to adjust.

CLOSED CAPTION

Caption Display

Analog Caption Type

Digital Caption Type

Digital CC Preset

Digital CC Style(N/A)

:Return

:Select Menu

:On/Off

Off

CC1

Service1

Custom

Caption Display

Press ▼/▲ button to select Caption Display, then press ◄/► button to select ON or OFF.

Analog Caption Type

Press ▼/▲ button to select Analog Caption Type, then press ◄/► button to select the type. Available type: CC1, CC2, CC3, CC4,

TEXT1, TEXT2, TEXT3, TEXT4.

Digital Caption Type

English

Press ▼/▲ button to select Digital Caption Type, then press ◄/► button to select the type. Available type: Service1~6.

Digital CC Preset

Press ▼/▲ button to select Digital CC Preset, then press ◄/► button to select Default or Custom.

Digital CC Style

This menu is only shown when the Digital CC Preset is selected Custom.

DIGITAL CC STYLE

CC Size Default

CC Font

CC Opacity

Text Color

CC Background Opacity

CC Background Color

CLOSE CAPTION

:Return

:Select Menu

Default

:Change Setting

Page 31

English

MENU OPERATION

CC Size

Press ▼/▲ but ton to select CC Si ze, then press ◄/► but ton to set . Avai labl e Si ze: Def aul t, Sm al l, Standar d, Lar ge.

CC Font

Press ▼/▲ but ton to sel ect , then press ◄/► but t on to sel ect the Fo nt . Avai labl e type: Def aul t, Style0~7 .

CC Opacity

Press ▼/▲ button to select CC Opacity, then press ◄/► button to select the Opacity. Available Opacity: Default, Solid, Flashing, Translucent, Transparent.

Text Color

Press ▼/▲ button to select Text Color, then press ◄/► button to select the color. Available Color: Default, Black, White, Red, Green,

CC Background Opacity

Press ▼/▲ button to select CC Background Opacity, then press ◄/► button to select the Opacity. Available Opacity: Default, Solid, Flashing, Translucent, Transparent.

CC Background Color

Press ▼/▲ button to select CC Background Color, then press ◄/► button to select the Color. Available Color: Default, Black, White, Red, Green, Blue, Yellow, Magenta,

Menu Language

Press ▼/▲ button to select the item Menu Language, then press ◄/► button to adjust. Available Language: English, French, Spanish.

Blue, Yellow, Magenta, Cyan.

Cyan.

Clock

Press ▼/▲ button to select the Clock, then press OK to edit.

CLOCK

Time Zone Alaska

Auto Clock Off

Setup Time 2009-10-21 20:00:00

Day Of Week (N/ A) Tue(N/A)

:Change Setting:Select Menu

Time Zone

Press ▼/▲ button to select Timer Zone, then press ◄/► button to set. Available Size: Central, Mountain, Pacific, Alaska, Hawaii, Samoa, Newfoundland, Atlantic, Eastern.

Auto Clock

Press ▼/▲ button to select Auto Clock, then press ◄/► button to set it On or Off. If you set it will adjust the time corresponding the DTV time automatically.

Setup Time

Press ▼/▲ button to select Setup Time, then press ◄/► button to adjust the time and use the ENTER button to go to the next option.

Day Of Week

This option displays the Day Of Week corresponding to the setup time.

it On,

Page 32

Enter the Reset password “0000”,

For

Modes:

Page 33

MENU OPERATION

PICTURE MENU

English

PICTURE

Picture Settings

Screen Settings

PC Settings

Color Temperature Normal Advanced Picture Settings(N/A)

:Return

:Select Menu

ENTER

:Go to Next Menu

Picture Settings

1.Press ENTER when the Picture Settings item is highlighted. Then you will go to the sub-menu as following.

2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.

3.Press◄/► to adjust the item to the desired level.

4.When you have changed the settings, you can

exit from the menu by pressing MENU.

PICTURE SETTINGS

Picture Mode User

Brightness

Contrast

Color

Tint

Sharpness

:Return

:Select Menu :Change Setting

Picture Mode

Press ▼/▲ button to select Picture Mode, then press ◄/► button to adjust. Available picture mode: Movie, User, Dynamic, Standard.

Brightness

Press ▼/▲ button to select Brightness, then press ◄/► button to adjust.

Page 34

MENU OPERATION

Contrast

Press ▼/▲ button to select Contrast, then press ◄/► button to adjust.

Color

Press ▼/▲ button to select Colort, then press ◄/► button to adjust.

Sharpness

Press ▼/▲ button to select Sharpness, then press ◄/► button to adjust.

Contrast

Color

Sharpness

Tint

This option can not be adjusted.

Screen Settings

1.Press ENTER when the Screen Settings item is highlighted. Then you will go to the sub-menu as following.

2.Press▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.

3.Press ◄/► to adjust the item to the desired level.

4.When you have changed the settings,

you can exit from the menu by pressing MENU.

English

SCREEN SETTINGS

Screen Size Standard

Auto Wide(N/A)

:Return

Screen Size

Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size: Standard.

Auto Wide

Auto Wide item is invalid in PC source.

:Select Menu

:Change Setting

PC Setting

1.Press ENTER when the PC Settings item is highlighted. Then you will go the sub-menu as following.

2.Press

3.Press ◄/► to adjust the item to the desired level.

4.When you have changed the settings, you can exit from the menu by pressing MENU.

▼/▲to select the desired menu item. Press ENTER to proceed if necessary .

Page 35

English

MENU OPERATION

PC SETTINGS

Auto Adjust Enter

Horizontal Position

Vertical Position

Clock

Phase

Reset Enter

MENU ENTER

:Return

:Select Menu :Press To Enter

Auto Adjust

Press ▼/▲ button to select Auto Adjust, then press OK button to start auto adjusting.

Horizontal Position

Press ▼/▲ button to select Horizontal Position,

Horizontal Position

then press ◄/► button to adjust.

Vertical Position

Press ▼/▲ button to select Vertical Position, then press◄/► button toadjust.

Vertical Position

Clock

Press ▼/▲ button to select Clock, then press ◄/► button to adjust.

Clock

Phase

Press ▼/▲ ◄/► button to adjust.

button to select Phase, then press

Phase

Reset

Press ▼/▲ button to select Reset, then press OK button to reset the options above.

1.SOUND menu and description are the same as that for TV. but the settings for Analog Sound and Digital Sound are invalid in PC source.

2.PARENTAL menu and descriptions are the same as that for TV source.

3.SETUP menu and description are the same as that for TV source. But the setting for Closed Caption is invalid in PC source.

4.OTHER menu and description are the same as that for TV source.

5.CHANNEL menu and description are invalid in PC source.

Note: The operation and description of the hot key is programmable on your remote control.

Page 36

10. Troubleshooting

Please check if you can solve problems by troubleshooting yourself.

TROUBLESHOOTING

English

Troubleshooting

No signal

No color shades

Stain on the

screen

Double or multiple

display image

Snow on the screen

The remote control

does not work

"Zip" made noise on

TV cover

Control

Please check that all cables are correctly plugged in.

Adjust the contrast, the color and the brightness.

May be the result from a lighting and other electrical devices or appliances.

May be the result of an electrical wave disturb from other TV, Computer and Game machine or Radio.

The cables of the antenna are not correctly plugged in.

Please check the batteries order and alignment. Check that the IR of

the remote control is not hidden by something.

Even if the display image is correct, the noise may come from an unsteady fixation of the panel.

signal from car, motor, neon light

No sound

Make sure that you have not press the MUTE button of the panel or of the remote control.

Page 37

TUNER

260

w /

w / o

1320 x 300 x 916 mm

1320 x 114 x 876 mm

42.3

49.86

Page 38

Page 39

Page 40

www.seikiworld.com