PERSONAL IN EAR MONITOR
SYSTEM
INSTRUCTION
MANUAL
PLL Synthes zed STEREO TRANSMITTER
R
L
VOLUME
CHANNEL SELECTOR
HEADPHONESMONITOR
POWER
CONTENTS
CHARACTER
SPECIFICATIONS
NAMES OF PARTS
INSTALLATION
POWER SUPPLY CONNECTION
CONTROLS AND CONNECTIONS
NOTE
1
1
2
3
4
5
6
Thank you for your kind using our wireless system.
Before using the machine please read the instruction
manuel very carefully. According to our instruction
manuel for ensure you using of the best function and
performance. If any defect please contact with our
agent or delear. It is our pleasure to serve you.
Thank you for your cooperation
SPECIFICATIONS:
Frequency range 750~865MHz
Frequency stability 100ppm(-10 )
Antenna output BNC socket 50
F output power Max 2.33mW
R
AF frequency response 50-15KHz
Modulation Stereo FM working on the "pilot
tone" principle
Spurious emission 55dBc(Type)
Power supply extend DC 12-15V 500mA AC / DC Adaptor
Headphone output 1/4(6.3mm) stereo jack
Load impekance of headphone 16
output
AF inputs XLR / 6.3mm ,RCA line
THD at 1KHz 1%
Dimensions 210(W) 232(D) 44(H)mm
8.27" 9.13" 1.73"
Weight 1.35Kg(298lb)
NAMES OF PARTS
PLL Synthes zed STEREO TRANSMITTER
R
L
VOLUME
1
(REAR PANEL)
--
+ +
12-15V
DC INPUT
9
1. Volume control.
2. AF-LEVEL display.
3. Channel display.
4.Channel selector control.
5. Headphone monitor
volume control.
6. Headphone monitor.
7. Power on indicator.
2 43 5
1-CD PLAYER
2-CASSETTE PLAYER
3-RADIO TUNER
4-AUX INPUT
1 2 3 4
11 12 13 14
10
(FRONT PANEL)
CHANNEL SELECTOR
2
2
B
1
STEREO MONO
MIC. INPUT
8. Power switch.
9.DC input socket.
10.Line input (left) .
11.Line input (right).
12.Input mode.
13.Stereo / mono control
14.Mic input.
15.Antenna.
1
HEADPHONESMONITOR
P
U
SH
POWER
6
7
8
ANTENNA
15
INSTRUCTION MANUAL
INSTALL ANTENNA
ANTE
Audio Input Connector
You can connect a 1/4 inch phone plug or balance phone plug or
RCA line input. Input mode and stereo / mono control.
+ +
12-15V
DC INPUT
--
1-CD PLAYER
2-CASSETTE PLAYER
3-RADIO TUNER
4-AUX INPUT
STEREO MONO
1 2 3 4
2
2
B
1
MIC. INPUT
P
U
S
H
IN
2
2
B
1
MIC. INPUT
IN BA
P
U
S
H
NCED
LA
UNBAL
RCA
2
INSTRUCTION MANUAL
POWER SUPPLY CONNECTION
Use dc power supply could switch
with adaptor supply or batter of
12V-15V.
Connection DC supply , DC plug
connection with "DC INPUT" socket.
Another plug terminal connection
with battery or power supply.
POWER SWITCH
Make sure the correct current voltage. Push this power switch once
to turn on; push it again to turn the
power off. If unit still fails to operate,
Secure a qualified technician or
contact us for a Return Authorization prior toshipment.
--
+ +
12-15V
DC INPUT
IN
DC
12V-15V
HEADPHONESMONITOR
1-CD PLAYER
2-CASSETTE PLAYER
3-RADIO TUNER
4-AUX INPUT
STEREO MONO
1 2 3 4
POWER
*Disconnect power supply before
removing receiver cover.
3
INSTRUCTION MANUAL
CONTROLS AND CONNECTIONS
VOLUME ADJUSTOR
The purpose of this control is to
give the ability to provide an audio
output level from the wireless system that is similar to that of a wired
micrephone.
DISPLAY
AF-LEVEL Display : The AF level is
displayed by an LED meter A which
indicates the strength of the audio
signal received.
VOLUME
VOLUME
PLL Synthes zed STEREO TRANSMITTER
R
L
PLL Synthes zed STEREO TRANSMITTER
R
L
CHANNEL SELE
CHANNEL SELE
Monitoring the sound singnal,
headphone connection
Please use heaphones with a 1/4
(6.3mm ) stereo jack plug.
A
HEADPHONESMONITOR
4
POWER
TRANSMITTER
1m
1m
THE WIRELESS TRANSMITTER
LOCATED AT GOOD CONDITION
PLACE.
BE CAREFUL, DON'T DROP OFF
THE WIRELESS TRANSMITTER
TO FLOOR
KEEP AWAY RAINING OR SUN
SHINE.
IF YOU ARE NOT TECHNICAL
ENGINEER PLS. DO NOT
MODIFIED OR KNOCK - DOWN
IT.
5
Loading...