Page 1
TOPP PRO
NF05049
說明書-英西文
FORZA SERIES TOPP PRO_V1.0
FORZA 15A
0.08KG /1
銅板紙
7
2017.09.12
14
Page 2
PROFESSIONAL SPEAKER SYSTEM
FORZA 12A / 15A
Page 3
11
13
Page 4
11
1. Introduction
2. Installation Tips
3. Usefull Data
4. Quick Start
5. Rigging
6. Panel Description
7. Frequency Response Diagram
8. Wire Connections
9. Technical Specifications
10. Guarantee
11. Notes
* FORZA series are Active Speakers for professional use, they can be used in following
electromagnetic environment: residential, commercial and light industrial, urban outdoors.
They are the apparatus Not intended for rack mounting.
4
4
4
5
6
7
8
9
10
11
12
* FORZA series, the peak inrush current is 0.9A
*This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference, and (2)this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
12
3
Page 5
Introduction
Thank you for choosing TOPP PRO. The new TOPP PRO MUSIC GEAR cabinets have been
designed to provide a cost effective high grade solution while maintainig high quality cabinet
construction and optimum components.
The FORZA series, can be used for all types of applications including, but not limited to,
churches, conference centers and discos.
The woofer and driver combination provides excellent performance rivaling those cabinets
costing much more.
Our Professional Audio Products are designed and tested by a highly qualified engineering team
with more than 20 years of experience. Great care is placed in delivering products with excellent
performance, specifications and dependable reliability. Also great emphasis is placed in creating
and bringing to market products that can fill multiple applications and also offer customers
exceptional value.
Installation Tips
Speakers should be placed in a position that allows for unobstructed sound projection. In many
instances it is beneficial for speakers to elevate on tripod stands to achieve maximum dispersion
and reach. Consider TOPP PRO speaker stand or equivalent to raise speakers.
Using quality cables ensure best possible sound. Consider using TOPP PRO 16 or 14 gauge
cables or equivalent.
For best results match the speakers to a good amplifier that matches the wattage and
impedance of your speakers. Proper amplification power results in good quality audio and
longer component life. Check out.
Avoid pointing microphone directly at an amplified speaker otherwise could cause feedback
possible damaging speaker components and your hearing.
Usefull Data
Please write your serial number here for future reference.
4
Page 6
Quick Start
FORZA 12A
12
57
2.6
126
458 x 411 x 683 mm
18.2
Make all initial connections with all the equipments powered off, and ensure that all the
main volume controls are turned completely down.
1). Connect one side of the signal cable at your audio mixer into output left / right (with Stereo-Jack
or XLR) and the other side of the cable into the line input Stereo-Jack) of your active speaker
cabinet.
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the main mix level
control to manipulate the output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
Signal Cable
Signal Cable
4
Tripod
Mount
Left
Main Mix
Output
Mixer
Right
Main Mix
Output
Tripod
Mount
5
Page 7
5
Rigging
The FORZA series speaker cabinet also provides the suspension points for installation.
(M10 x 1.5PH LENGTH: 30mm).
For further details, please refer to the right illustration.
Eye bolt
Suspension Point
o
45
6
Page 8
FORZA 12A
Panel Description
AMP INTERFACE (FORZA 12A / 15A)
(1) BI-POLAR MAIN POWER SWITCH
(2) AC POWER SOCKET WITH MAIN FUSE
(3) LINE INPUT ON XLR CONNECTOR
(4) MIC INPUT ON XLR CONNECTOR
(5) MIC INPUT ON 1/4 JACK CONNECTOR
(6) LINE INPUT ON 1/4 JACK CONNECTOR
(7) MIC INPUT VOLUME CONTROL
(8) LINE INPUT VOLUME CONTROL
(9) MASTER VOLUME CONTROL
(10) EQ-HIGH CONTROL
(11) LINE INPUT ON AUX CONNECTOR
(12) EQ-LOW CONTROL
(13) CLIP INDICATOR RED LED
(14) POWER INDICATOR GREEN LED
(15) MIX OUT ON XLR CONNECTOR
(8)
(7)
(6)
(5)
(4)
(3)
6
(9)
(10)
(11)
(12)
(13)
(14)
(15)
FORZA 15A
(2)
(1)
(f)
(c)
(d)
(e)
(g)
USB PLAYER
(a) Insert a standard microSD card
(b) Insert USB player
(c) Aux Input
(d) Play the last song or decrease the volume after
pressing 2 seconds
(e) Press this key to start playing or Press this key
to pause
(f) Play the next song or increase the volume after pressing 2 seconds
(g) PLAY MODE
In the opening or playing state, press this key to select the three circling modes in order:
Line: The player plays the files you input. The mark on the screen is "LINE".
Bluetooth: The player plays the files from your bluetooth device The mark on the screen is
" bt ", In this state, you will hear a tone from the loudspeaker. From your Bluetooth device's
settings page, enable Bluetooth and select " VIRE BT " as the device.
USB : The player plays the files in a standard USB drive. The mark on the screen is "USB"
(h) Display the status of USB playing
(b)
(a)
(h)
7
Page 9
7
Frequency Response Diagram
FORZA 12A
FORZA 15A
(FORZA 12A / 15A)
8
Page 10
8
45
o
9
Page 11
9
Model Active
System Type
Transducer Low
Transducer Driver
Horn Coverage
Frequency Response (-6dB)
Crossover Frequency
Max SPL
AMP Power Output
USB Player
Connector
External Controls
Electronic Protections
Power Supply
Enclosure Construction
Mounting
Dimensions (HxWxD)
Net Weight
FORZA 12A
2-Way Active Vented Speaker
12" Woofer, 3"voice coil
1" Driver, 1.35" Voice Coil
90°H x 45°V
57Hz-20KHz
2.6K Hz
126dB Max.
415W Continuous ( Bi-AMP , LF 350W/RMS + HF 65W/RMS), 1660W
Peak
With USB&Mirco SD CARD
INPUT1-Mic With XLR*1&6.3 Jack*1/INPUT2-Line With XLR*1&6.
3Jack*1&3.5Jack*1
Input 1&2 and Master Volume Control/2 Band EQ-High&Low/Power
ON with Green LED/Clip Limiter with Red LED
Thermal/Overload/Analog limiter/Compressor
110V/240V Switchable
Plastic cabinet,Trapezoidal & Monitor shape,Metal grille, Rubber
foot, 3* Handles ( both side and Top)
36MM standard pole-mount/ M10*4PCS Flying Pointing(Optional)
458*411*683 mm
18.2(kg)
Model Active
System Type
Transducer Low
Transducer Driver
Horn Coverage
Frequency Response (-6dB)
Crossover Frequency
Max SPL
AMP Power Output
USB Player
Connector
External Controls
Electronic Protections
Power Supply
Enclosure Construction
Mounting
Dimensions (HxWxD)
Net Weight
FORZA 15A
2-Way Active Vented Speaker
15" Woofer, 3"voice coil
1" Driver, 1.35" Voice Coil
90°H x 45°V
55Hz-20KHz
2.5K Hz
128dB Max.
415W Continuous ( Bi-AMP , LF 350W/RMS + HF 65W/RMS), 1660W
Peak
With USB&Mirco SD CARD
INPUT1-Mic With XLR*1&6.3 Jack*1/INPUT2-Line With XLR*1&6.
3Jack*1&3.5Jack*1
Input 1&2 and Master Volume Control/2 Band EQ-High&Low/Power
ON with Green LED/Clip Limiter with Red LED
Thermal/Overload/Analog limiter/Compressor
110V/240V Switchable
Plastic cabinet,Trapezoidal & Monitor shape,Metal grille, Rubber
foot, 3* Handles ( both side and Top)
36MM standard pole-mount/ M10*4PCS Flying Pointing(Optional)
632*386*366 mm
19.2(kg)
10
Page 12
Guarantee
10
11
Page 13
11
Notes
FORZA 12A / 15A
FORZA 12A / 15A
12
Page 14
Notes
11
13
Page 15
FORZA 12A / 15A
Loading...