Segway Steering Grip KIT User Manual
Customer Installable Parts
Steering Grip Kit
Contents
· 1 Fixed Steering Grip
· 1 Steering Grip Control
· 1 fastener
Specifications
· Black rubberized grip surface
· Fluid damped steering control
Tools Required
· 5mm hex wrench
Before you begin:
Do not use the parking stand to support the Segway HT while performing this procedure. The parking
stand is not designed to withstand the forces that may be generated. Instead, support the platform
with an object so that you have easy access to the handlebar.
WARNING
Always shut down your Segway HT and unplug the charge cord before performing any maintenance or installing
any part or accessory.
Follow these instructions carefully. Failure to follow these instructions carefully could damage your Segway HT
and render it unsafe to use.
17439-00001ab
>
Removal Instructions
Step 1
Remove the fastener at the end of
the handlebar on the steering grip
side using a 5mm hex wrench.
Step 2
Slide the fixed steering grip and
steering grip control off of the
handlebar.
>
Installation Instructions
Note
Replace all old components, including
fasteners, with the materials included
in this kit.
Step 3
Orient the new steering grip control
so that the raised contour is facing
up and toward the front of the unit,
and the key on the inside opening
aligns with the groove on the
handlebar, and slide the grip all the
way on.
Step 4
Orient the fixed steering grip so the
key on the inside opening aligns with
the groove on the handlebar, and
slide the grip all the way on.
Step 5
Thread in the new fastener and
torque to 6.8 N-m with a 5mm hex
wrench.
LIMITED WARRANTY The Segway HT Steering Grip Kit is a Replacement Part covered by the Segway
Transporter Replacement Parts Limited Warranty (copy delivered with this kit).
Questions?
If you are missing a part, or if you need to return the product please contact Segway Customer
?
Operations at 866.4SEGWAY (866.473.4929) or on our website at
www.segway.com/support/contact_us.html.
TM
Human
17439-00001ab
Loading...