Segway Ninebot Gokart Pro Owner's Manual

The m anufacturer reserve s the right to make change s to the p roduct, relea se firmware updates, and upda te this

manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials.

Yo u m u s t i n s t a l l t h e A p p t o f o l l o w t h e N e w R i d e r Tu t o r i a l a n d a c t i v a t e y o u r p r o d u c t , a n d o b t a i n t h e l a t e s t u p d a t e s a n d

safety instructions.

CE.00.0035.31-C

User Manual

Ninebot Gokart Pro & Ninebot S-Max

Welco m eContents

Welcome

Packing List
Ninebot GokartPro

1 Riding Safety

2 Diagram

3 Adjustment

4 Installation of Accessories

5 Charging

6 Before the First Drive

7 Learning to Drive

8 Specifications

9 Certifications

Ninebot S-Max

1 Riding Safety

2 Diagram

3 Remove the S-Max body form the Gokart

4 Assembling Your S-Max

5 Charging

6 Before the First Ride

7 Learning to Ride

8 Warning

9 Bluetooth Remote Control

10 Lifting and Power-assist Mode

11 Specifications

12 Certifications

Assembly and Riding Safety Video
Maintenance

Trademark and Legal Statement

01
02
04
04
08
09
10
12
12

14

16
18
19

19
21
23

24

26
27
28

30
33

34

35

36

37

38
40

Thanks for choosing the Ninebot Gokart Pro.

Ninebot Gokart Pro is a stylish sports and entertainment equipment, which can be separated into a Gokart
frame and a self-balancing vehicle. You can also assemble the body of the self-balancing vehicle into Ninebot
S-Max.
This manual introduces respectively the Ninebot Gokart Pro (hereinafter referred to as Gokart) and the
Ninebot S-Max (hereinafter referred to as S-Max).
Enjoy your ride and connect with riders worldwide!

* Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only.

Actual product and functions may vary due to product enhancements.

01

Packing List

Frame

6

Steering wheel quick release components

7

Battery Charger

8

Ninebot Engine Speaker

9

Rear spoiler

(hereinafter referred to as “the speaker")

Accessories

1

User material

User Manual Quick Start Guide

4

Hex wrenches

4 mm

hex wrench

02 03

5 mm

hex wrench

hex wrench

2.5 mm

5

Tools to remove the steering bar bracket

Metal mold×2 M5 screw×2 M6 screwNut×2

2

(AA) battery × 6

3

Screw × 6

Steering bar

bracket removal tool

* Sold separately at http://ww.segway.com

10

Steering bar

Screw × 2 Cap

When unpacking your Gokart, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center.

Please retain the box and packaging materials in case you need to ship your Gokart in the future. Always power off your Gokart
and unplug from the power supply before cleaning.

Tire

Front tire Comfortable tireRear tire

(For Ninebot S-Max only)

Ninebot Gokart Pro

1 Riding Safety

Remove or tie back anything loose (i.e. clothing, hair, jewelry, etc.) that could be caught in any moving parts. Always fasten

the seat belt before riding and ensure it is securely tightened. A loose seat belt can get stuck in the wheels.

6. Be sure to read and follow all the "WARNING" ( ) "CAUTION" ( ) notices in this manual. Never allow two or more riders at
the same time.

7. To avoid burns caused by high temperature, Do not touch the motor.

8. Do not lift or press the rear spoiler. Do not lift the product when holding the taillight. Always lift the rear bumper when you

No

loose
long
hair

need to carry the Gokart.

Where to Drive:

1. When entering public spaces, always comply with local laws and regulations. Only ride in areas where you have first obtained
permission from the property owner.

2. The Gokart is designed to be driven on a dry, flat, hard-surface, free of obstacles, bumps, holes, and other hazards.

3. Do not drive on roadways, near motor vehicles, pedestrians, bicyclists, animals, on or near steep inclines or steps, curbs,
near swimming pools, through puddles or other bodies of water. Use caution when riding in areas with trees, posts, or
fences. You must leave sufficient space between you and those items to be able to safely pass them.

1 Gokart is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot (Ninebot (Beijing)

Tech Co., Ltd. or its subsidiaries and affiliates) nor Segway Inc. is responsible for injuries or damage caused by a driver's
inexperience or failure to follow the instructions in this User Manual or in the New Rider Tutorial.

2 Remember as with any mode of transportation, that whenever you drive the Gokart, you risk injury or death from loss of

control, collisions, and falls. You can reduce the risk by following all the instructions and warnings in this manual, but you
cannot eliminate all the risks.

3 The Gokart kit contains small parts which can create a choking hazard. Keep small children away from the Gokart.

Pre-Ride Checklist and Preparing for Your Drive:

1. Before each drive check and tighten any loose parts, fasteners, straps, and replace damaged components.

2. To avoid accidents caused by improperly inflated or worn tires, check the tire pressure on the Ninebot S-Max tires and wear
on all tires before each ride. Do not touch moving or spinning tires.

3. Ensure that the battery level and vehicle operating status are within the specifications contained in the manual of the model
being used with the Gokart.

4. Carefully read, understand, and follow all instructions in this User Manual and watch and understand the New Rider Tutorial
in the App before your first drive. Do not attempt to drive the Gokart if you are not able to drive in accordance with the
instructions in this Manual or you risk serious injury or death.

5. Always wear appropriate shoes, clothing, and protective gear when driving. Protective gear includes the use of a helmet,
knee pads, and elbow pads. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and
protects the back of your head.

04 05

4. Do not ride the Gokart at night.

5. Do not ride on any ramp or incline that exceeds the maximum slope.

6. The Gokart is never to be ridden indoors.

7. Do not ride in the snow, rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not ride over
obstacles (including, but not limited to, sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction
and could cause a collision.

8. Do not allow the Gokart to get wet. You risk damage to the batteries and potential for a fire or explosion due to a wet battery
pack.

How to Drive:

1. Gokart is not a means of transportation. Please obey local laws, regulations, and policies when driving.

2. Do not turn the Gokart on unless it is parked on flat ground. As with other vehicles, faster speeds require longer braking
distance. Sudden acceleration or braking on smooth surfaces could lead to wheel slip and collisions.

3. Be cautious and always keep a safe distance between you and others when driving. Be alert and slow down when entering
unfamiliar areas. Do not drive at unsafe speeds. You must always use good judgment based on your driving skills and the
surrounding environment.

4. Do not allow anyone to drive your Gokart on his/her own unless he/she has carefully read this manual, and followed the New
Rider Tutorial. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic
operation of the Gokart and make sure each new rider wears a helmet and other protective gear.

5. To avoid distraction when driving your Gokart, do not use a cell phone, camera, headphones, earbuds, or perform any other

activities while driving.

6. When approaching or crossing an intersection, road, corner, or gate of any kind, always slow down and yield to others.

7. Be alert! Scan both far ahead and in front of you. Your eyes are your best tool for safely avoiding obstacles and low traction

surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). Use caution when transitioning over

differing terrain.

8. Always slow down when turning. Turning at a high speed can cause loss of control, possible vehicle turn-over, and risk of
injury or death.

9. Do not perform stunts of any kind. All four tires must remain on the ground at all times.

10. While driving the Gokart, always remain seated with arms and legs inside the Gokart.

11. Do not carry cargo of any kind.

12. If the Gokart makes an abnormal sound or signals an alarm while driving, stop immediately and do not use the Gokart or
Ninebot S-Max until the cause of the noise/alarm has been identified and corrected. Contact after-sales service for
assistance.

Who Should Drive:

The manufacturer recommends drivers be at least 14 years old. Children under the age of 16 should only drive under adult

supervision. Always follow these safety instructions:

A. People who should not drive the Gokart include:

i. Anyone under the influence of alcohol, drugs, or intoxicants.

ii. Anyone who suffers from disease that puts himself/herself at risk if he/she engages in strenuous physical activity.

iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.

iv. Anyone whose weight is outside the stated limits (see Specifications).

v. Pregnant women.

B. The Gokart is intended for one person only.

C. To drive safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.

D. Drivers must be able to hear the environment around them.

surges and voltage spikes.

4. Only use the charger specified by the manufacturer. Do not use a charger from any other product.

5. Only use Ninebot or Segway approved parts and accessories. Do not modify your Gokart. Modifications to your Gokart could

interfere with the operation and performance of the Gokart, which may result in serious injury and/or damage, and could

void the Limited Warranty.

Maintenance and Storage:

1. Be sure the Gokart is powered off before performing any maintenance or when installing or replacing parts.

2. When installing components, use proper and sufficient force until the component is secure. If the installation is too loose or
too tight, the Gokart may not function properly, resulting in the potential for injury to you or others or damage to, or
malfunction of, the Gokart.

3. Install batteries for the Gokart in accordance with the instructions and ensure that the positive and negative electrodes of
the batteries are installed correctly. Only use the batteries specified by the manufacturer. Do not charge the batteries as this
may cause a risk of fire or explosion. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable batteries. When the batteries are dead, purchase and replace them yourself.

4. Follow all instructions contained in the Ninebot S-Max User Manual when performing maintenance on the Ninebot S-Max.

5. Do not use a strong water flow or high-pressure hoses to clean the Gokart. Avoid getting water in the charge port. If your
Gokart has been exposed to heavy rain store it outdoors away from buildings and people but protected from the elements
until it is dry.

6. Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in use.
The Ninebot S/S-PRO should be stored in an environment where the temperature is no higher than 122°F (50°C) or lower
than -4°F (-20°C). If the temperature of the storage environment is lower than 32°F (0°C), do not charge it until after placing
it in a warm environment: over 50°F (10°C).

7. Do not charge the Gokart when the charge port, charger, or power socket is wet. Only use the original charger provided by
Ninebot or Segway when charging. Do not charge dry cells.

The data and parameters of the product vary with different models. They are subject to change without prior notice. Go to
www.segway.com for updated information.

After Each Drive:

1. Park the Gokart on flat ground and power it off. Failure to do so could cause the Gokart to move when exiting potentially
causing injury to you and others around you.

2. Allow the Gokart to cool down before charging. Do not attempt to charge the Gokart, if it, the charger, or the power outlet is
wet. Follow instructions in the Ninebot S-Max User Manual.

3. As with any electronic device, use a surge protector when charging to help protect your Gokart from damage due to power

06 07

2 Diagram 3 Adjustment

Waist protector

Seat

Handbrake handle

Seat belt

Headlight

Throttle (right)

rear spoiler

Steering wheel

(AA) Battery

compartment

Status indicator

Brake (left)

Front bumper

Stretch the frame and adjust the length
of the body

a With both hands holding the steering wheel and the

seat, stretch the frame out to a suitable position

along the horizontal direction of the connection

tube.

b Align the scalable structure of the frame with the

marking on the connection tube.

c Positioning: Use the short hex wrench to press the

two screws into the holes on the left and right
connection tube in order, as shown in the figure

(The screw is set to a depth of about 1 cm for
successful position).

d Tighten the 4 screws.

a

d

b

Four screws are already
inserted into the screw holes.

c

Adjust the steering wheel height

Steering wheel

(Ninebot Engine Speaker location)

Support rods

quick-release components

Scalable structure

of frame

Connection tube

(with frame adjustment marking)

Taillight

Power Button

* Press to turn on,
press and hold to turn off.

Strap fixing hole

Attachment straps

Electrical connection

cable plug

08 09

Adapter pad

Power extension cord

Rear bumper

Remove the speaker before adjusting the
height of the steering wheel (see page 11).

a Raise the steering wheel to a suitable height.

b Insert the quick release screw into the hole of

the corresponding height.

（Insert the quick release screw into the hole of

the corresponding height.）

c Tighten the quick release nut.
d Press to fix the steering wheel quick-release

components.

e Ensure the steering wheel does not shake.

Otherwise, repeat the steps b, c, d, e.

a

a

d

c

b

b

4 Installation of Accessories

b

Install the Rear spoiler

Note: Do not press or lift the rear spoiler during installation.

a Insert the tail bracket into the tail jack.

a

Remove the Speaker

Press the disassembly switch while lifting the speaker upward.

b Use the 2.5 mm hex wrench to tighten the 6 screws

into the main body of the rear spoiler (See Accessory

No. 2).

b

L

R

* For more information about the speaker, see the user manual of Ninebot Engine Speaker.

Install the Ninebot Engine Speaker

a Place the base in a proper position (as shown below) and

wrap the strap around the vehicle body and fasten the
strap. Press the remaining part of the strap into the
storage slot.

10 11

a

b Align the holes on the bottom of the speaker. Press

down until you hear a "clicking" sound.

Disassembly and Replacement of Tires

* Only applicable to Gokart front tire.

1 Use a 19 mm wrench to remove

the middle screw.

2 Replace the tire.

3 Tighten the screw.

The cross head of the screw should face outwards.