SEGI A1000 2WSP Users manual
User Manual
By Firstech LLC, Version: 1.0
Applicable to the following remote(s);
2W902R-SP 2 Way 5 Button LED Remote
&
ANT-2WSP 2Way Antenna
Remote & Antenna FCC ID Number (US Only) IC ID Number (International Only)
2W902R-SP VA5REC500-2WSP 7087A-2WREC500SP
ANT-2WSP VA5A1000-2WSP 7087A-2WA1000SP
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following conditions;
(1) This device may not cause harmful interference.
(2) This device may accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this device.
WWW.COMPUSTAR.COM
Introduction ................................... ........................... ............................. ........................... ............................3
Warranty Coverage .................................... ........................................................... .......................................3
Quick Reference ...........................................................................................................................................4
Button Lock ............................. ....................................................................................................................4
Full or Half Paging Mode ............................................................................................................................4
Valet Mode...................................................................................................................... ............................4
Remote Maintenance – Battery Replacement ...........................................................................................4
2 Way Remote Button Functions ........... .. ...... .. ... ..... ... ... ..... ... .. ...... .. ... ..... ... ... ..... ... ..... ... .. ...... .. ... ...............5
Function Button Menu ............ ..... ... .. ...... .. ... ..... ... ..... ... ... ..... ... .. ...... .. ...... .. ... ..... ... ... ..... ... .. ..........................6
Remote Option Menu Table ............................. ................................................................................... .......6
Remote LED Functions and Descriptions .................................................................................................6
Alarm LED Notifications ..............................................................................................................................7
1 Way Remote Button Functions ........... .. ...... .. ... ..... ... ... ..... ... .. ...... .. ... ..... ... ... ..... ... ..... ... .. ...... .. ... ...............7
General System Functions ..................................... .......... ........ ........... ........ ........ ........... ........ .......... ........ ..8
Sending Commands ...................................................................................................................................8
Receiving Commands ............................................. .. ... ..... ... ..... ... ..... ... ... ..... ... ..... ... ..... ... .. ..........................8
Active Lock/Arm and Unlock/Disarm ................ ................................ ..........................................................8
Passive Lock/Arm ........................................................... ............................. ...............................................8
Automatic Transmission Remote Start Function ..................... ..................................................................9
Manual Transmission Remote Start Function (Reservation Mode) ........................................................ ..9
Trunk Release ......................................................................................................................................... 10
Auxiliary Outputs/Window Roll-Down/Sliding Doors.......... .................. .................................... .......... ..... 10
Silent Arm/Disarm................................................................................ .................................................... 10
Remote Mute ............................................................................................................................... ........ .... 11
Shock Sensor On/Off ............................................................................... ............................ .. ........ ........ . 11
Automatic Button Lock ................................................................................................................... ......... 11
Advanced System Functions ............ ........... ........ ........... ........ .......... ........ ........... ........ ........... ........ ......... 12
Drive Lock/Ignition Controlled Door Locks ....................... ........... ........ ........... ........ .......... ........ ........ ....... 12
Turbo Timer Mode ....................................... ... .. ...... .. ...... .. ... ..... ... ... ..... ... ..... ... .. ...... .. ... ..... ....................... 12
nd
2
Car Mode (Multiple Vehicle Control) ................................ ..... ... .. ...... .. ...... .. ... ..... ... ..... ... ... ..... ... ......... 12
RPS Touch and RPS (Remote Paging Sensor) .... .. ... ... .. ................................... .................................... 12
Secure Valet Switch .... ........................................................... ............................. ........................... ........ . 15
Timer Start Mode .................................................................................................................... ........ ......... 15
Cold/Hot Start Mode ................................................................................................................................ 15
Remote Coding / Programming Routine ................................................................................................ 16
Programming 2 Way 5 Button Remotes: ................................. ............................................................... 16
Remote Start Error Diagnostic ............................ ................................................... ................................. 16
Alarm Diagnostic .............................................................. ............................................................. ............ 17
Limited Lifetime Warranty ........................................................................................................................ 18
2
Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this
system, we recommend that you thoroughly review the following manual. Please note that this manual
applies to the 2 Way 5 Button LED Remote (2W902R-SP) Regardless of whether you purchased the
ALARM IT, START IT, or MAX IT system. This manual also supports the 1WG7R-SP that is included in
your new RF Kit. Please note that there are certain features listed in this manual that may not be
available for your system. There may also be features listed in this manual that require additional
installation or programming before they become active. If you have any questions or concerns please
contact the original place of purchase. For further information you may also contact our customer support
center at 888-820-3690.
Warranty Coverage
Caution: The Manufacturer’s warranty will be voided if this product is installed by anyone other than an
Authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of
this manual. Firstech remotes carry a 1 year warranty from original date of purchase. CompuStar Pro
remotes carry a 2 year warranty.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the
registration form within 10 days of purchase. We do not include a mail in warranty registration card with
each unit – registration must be done online. To verify that an authorized dealer installed your system,
we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice
in a safe place.
3
Quick Reference
Button Lock
The 2W902R-SP comes equipped with automatic button lock. This requires you to tap any button to
wake your remote up then tap the button for the function you are trying to activate. Button lock can be
turned off in your remote’s option menu.
Full or Half Paging Mode
The 2W902R-SP is shipped in Half Paging Mode. This means that the remote will only receive 2 Way
LED confirmations for remote start and lock and unlock. It will not receive 2 Way LED confirmations
when the alarm is triggered. To turn this feature on hold the
enter the Remote Programming Menu. Tap the Lock <insert lock button icon> button to turn Full Paging
on. The remote will beep twice and LED flash red. You are now in Full Alarm and Starter Mode.
buttons for 2.5 seconds to
Valet Mode
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet
Mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in
Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash.
The system can be put into valet one of three ways:
1. Turn the vehicle’s key to the ignition “on” position, tap the Function and Trunk buttons
<insert function + trunk button icons> at the same time for a half second. The parking lights
will flash once and/or siren chirp once to confirm the system is in valet mode. Repeat this process to take
the system out of valet mode. The parking lights will flash twice and/or siren chirp once to confirm the
system is out of valet mode. Please note the confirmation chirps from the 2 Way remote will be quieter in
Valet Mode.
2. If you do not have your remote control, you can put the system into valet by turning the ignition key
“on” and then “off” five times within 7 seconds. The parking lights will flash once to confirm the system is
in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required
to take the system out of valet mode.
3. If your system is set up for a secure valet option (optional), you will not be able to put the system into
valet until the proper code has been entered using the secure valet switch. The secure valet switch is the
small button with bright blue LED on the front and if installed is the only way to override the alarm and/or
remote start. Until programmed, the default code is (3, 3).
Removing System Out of Valet:
Tap the<insert function + trunk button icons> for a half second to remove the system out of Valet. On
starter and alarm/starter systems, you can turn the key to the Ignition On position and tap the foot brake
10 times. This will take your system out of Valet Mode. If this does not work you can also reprogram your
remote(s). See Remote Coding/Programming Routine section for details.
Remote Maintenance – Battery Replacement
The only regular maintenance this system requires is remote control battery replacement. No
programming is required when replacing the battery.
4
2W902R-SP:
Turn the remote over and unlock the battery cover by sliding the clear tab up. Slide the battery cover off,
revealing the AAA battery. IMPORTANT: Be sure to observe correct polarity when installing the battery.
1WG7R-SP:
Use a quarter or flat head screwdriver to pry the back cover off of the remote. You can insert the quarter
or flat head in the small slot at the bottom of the remote by the keychain loop. Carefully pry off the back
cover using caution that you do not damage the circuit board. Your battery size should be listed on the
battery. Battery size: Two (2) CR2016) Replacements can be purchased from your local Firstech dealer
or an electronics store.
2 Way Remote Button Functions
Button Duration Function / Description
<Insert
Lock
Icon>
<Insert
Unlock
Icon>
<Insert
Trunk
Icon>
<Insert
Key
Icon>
<Insert
Function
Icon>
<Insert
Lock +
Unlock
Icon>
Half
second
4
seconds
Half
second
2.5
seconds
2.5
seconds
Half
second
2.5
seconds
This button activates and deactivates multiple features. See the Function Button Menu table below for
complete details.
Half
second
2.5
seconds
Locks doors and if equipped, arms the alarm.
Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
Unlocks doors and if equipped, disarms the alarm.
Run time extender. Resets the run time for Turbo Timer or Remote Start.
Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
Car Check (updates vehicle status on remote) / Secure Auxiliary
Holding this button will start your vehicle. Repeat and this will shut your vehicle down.
Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
alarm is triggered).
Turns the shock sensor on/off. (ALARM IT or MAX IT systems only)
<Insert
Function
and
Trunk
Icon>
<Insert
Function
and Key
Icon>
<Insert
Trunk
Half
second
2.5
seconds
Half
second
2.5
seconds
Half
second
Valet mode (see Valet Mode Section for details)
Option programming menu 1. For use during installation.
Activates timer start mode. Timer start mode has multiple programmable settings: duration
settings, temperature settings and self start settings.
Option programming menu 2. For use during installation.
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
5
and Key
Icon>
2.5
seconds
Accesses Remote Option Menu. See Remote Option Menu Table for details.
Function Button Menu
Button Duration
<Insert
Function
Icon>
One Tap
<Insert Lock
Icon>
Drive Lock
On/Off
Remote Option Menu Table
Feature
Enter and Exit
Remote Menu
2 Way Paging
Display
Silent
2nd Car Mode
Turns Feature
On or Off
<insert Trunk
+ Key button
icon>
<insert Lock
icon>
<insert Unlock
icon>
<insert Trunk
icon>
Button
Duration
2.5
Seconds
Half
second
Half
second
Half
second
<Insert Unlock Icon>
Turbo Timer On/Off Auxiliary 1 Auxiliary 2
Remote
Chirp(s)
Three On |
Three Off
One-Half
Paging | Two-
Full Paging
One On | Two
Off
One On | Two
Off
<Insert
Trunk
Icon>
Enters and Exits Remote Option Menu. The LED will flash purple.
Determines whether your remote is used for Alarm or Start Only
system. Set it to FULL for ALARM IT and MAX IT features. Set to
HALF for START IT ONLY systems. If on, LED will flash blue.
When turned off, the LED will flash red twice.
Important: The 2W902R-SP is defaulted in HALF for ST ART IT
systems. It must be changed to FULL for alarm systems.
Turns the silent mode on or off. If on, LED will flash blue. When
Puts your remote into 2
vehicle with the same remote as long as it has the same RF Kit
installed. If on, LED will flash blue. When turned off, the LED will
<Insert
Key/Start
Icon>
Function / Description
turned off, the LED will flash red twice.
nd
Car Mode. You can control another
flash red twice.
Automatic Button
Lock
<insert
Key/Start
icon>
Half
second
One On | Two
Off
Locks all buttons on the remote automatically after one minute.
Tap any button then the button(s) you would like to use to send a
command from the remote to your vehicle. If on, LED will flash
blue. When turned off, the LED will flash red twice.
Remote LED Functions and Descriptions
Your remote will communicate to and from your vehicle while in range. The LED will change colors
indicating transmission, confirmation, remote start run time and error confirmatio ns.
Event LED Color LED Duration Chirp(s)
Runtime Remaining:
100 Percent
Runtime Remaining:
66 Percent
Runtime Remaining:
33 Percent
All command
confirmations
All error
confirmations
Blue Once every 5 seconds Six times
Purple Once every 5 seconds N/A
Red Once every 5 seconds N/A
Blue Once or Twice depending on function
Red Three LED flashes Three chirps
Once or Twice
depending on
function
6
Loading...