Sega PIGS MIGHT FLY User Manual

PIGS MIGHT FLY

USER MANUAL

This manual is suitable for use in countries below:

USA

The UK

ASIA

- 1 -

[Table of Contents]

Simple Facts About The Machine ……………………………………………………3

Introduction ................................................................................................................. 4

Simple Maintenance & Servicing ……………………………………………………5
Test & Service ………………………………………………………………………..5
Machine Installation ………………………………………………………………….6
Games Descriptions ………………………………………………………………….6
Getting Started / How To Play ……………………………………………………….6

Test Menu…… …………………………………………………………………….....7

System Information …………………………………………………………………..8

Test Input …………………………………………………………………………......9

Output T est…………………………………………………………………………....10

Coin T est………………………………………………………………………………11
Sound T est…………………………………………………………………………….12
Screen T est ……………………………………………………………………………13
Book Keeping ………………………………………………………………………...14
Clock Setting…………………………………………………………………………..17
Games Setting …………………………………………………………………………18
Payout Setting …………………………………………………………………………20
Wiring Diagram………………………………………………………………………..22
Design Related Part ……………………………………………………………………24
Part List..………………………………………………………………………………25

- 2 -

Simple Facts About The Machine

Machine Name : PIGS MIGHT FLY
Machine overall dimension : H1950mm x W760mm x L750mm
Machine Weight :160kg

Voltage : 120V, 2.2A, 60Hz for US
: 230V, 1.3A, 50 Hz for the UK
: for other countries, voltage depend on individual countries.

Power Consumption : 264W for US
299W for UK

LCD dimension : Standard 37 inches.

Force require to push the handle : 200 N ( about 44.0 lbs ).

Note : This machine is intended for indoor use only !

- 3 -

Introduction

This manual describes the information on handling and maintenance of PGIS MIGHT FLY
manufactured by VS Electronic Assembly (Zhuhai) Co. Ltd. (authorized by SEGA SAMMY
GROUP Japan). The machine must not be used for other improper purposes. Any adjustment
procedures and maintenance service must be performed by a qualified engineer or technicians who
are comprehensively understands the machine.

Observe the following safety precautions

when operating this machine.

WARNING

Ä The main power switch of the machine is located at the bottom rear panel.
Ä Turn OFF the main power switch before cleaning, inspection, electrical components

replacement, repair, or other procedures. Failure to comply this warning may cause accident as
a result of electrical shock or malfunction.

Ä Operation on the electrical circuitry of the machine must be always performed by a qualified

and trained technician.

Ä Make sure to avoid moisture and dust entering into the machine when it is open. Moisture and

dust may be the source of electrical shock, mechanical failure and other errors.

Ä The description of this system manual should be correct and true to the best of our knowledge.

Please contact us if there is any chance of defect, flaw, or missing information.

* For the event of water drips into the machine accidentally, please temporarily turn off the

machine. Open the door on ticket dispenser and clean up any water that may drain into this
enclosure.
Ä If the supply cord is damaged, it must be replaced by a special cord or assembly available from

the manufacturer or its service agent.

- 4 -

Simple Maintenance Procedures

Ä Main “control panel” - Open the bottom rear panel (wooden), clean up any dust that may have

collected over some times. We recommend the clean up be done minimum once a month.

Ä Billboard Area – Open up the rear panel (sheet metal), clean up any dust that may have collected

on the billboard over some times. We recommend the clean up be done minimum once a month.

Ä Check the connection of all cables once every month.
Ä Remember to switch of all power supply before carrying out any maintenance.

Test & Service

Test button : Enter test mode and carry out test item.
Service button : Choose test item.
Volume Control button: Adjust volume/sound of the games.

Call the below phone number for further assistance:

1. USA : SEGA AMUSEMENTS USA INC.
Arthur Avenue, Elk Grove Village, IL 60007-5215, USA
Tel : [phone] (Toll Free)
Fax : [phone]

2. The UK : SEGAAMUSEMENTS EUROPE Ltd.
42 Barwell Businss Park, Leatherhead Road, Chessington,
Surrey, KT9 2NY, United Kingdom
Tel: [phone]
Fax: [phone]

3. ASIA :

SEGA CORPORATION

5F TRC Haneda Building, 2-13-1 Higashikojiya

Ohta-ku, Tokyo 144-0033

Telephone: [phone]

Facsimile: [phone]

- 5 -

Machine Installation

The installation is simple. Follow the below procedures:

1. Lower down the M16 bolt (at the bottom of the machine) so that the whole machine sit firmly on
the floor.

2. Connect the AC inlet with the cable provided to the power supply. Switch on the machine. The
on-off button is located at the AC inlet (rear bottom).

3. The machine will then start up and initiate the program automatically.

The machine is now READY to be “PLAY”.

Games Descriptions

The game is simple and easy to play.
What you need to do is just to insert your coin and press the start button. The arrow will move left
and right. When the arrow is pointing at the target, press the handle once. The Pig will fly and
shoot at the target. When the Pig hit the target, your scores will be shown on the screen.

Getting Started / How to play:

Insert coin/s. (The exact amount of coins is dependant on the Credit Board settings.)

Press the Start Button to start the game.

Watch the game introduction and how to play.

Press down on the See-saw controller to launch the Pig. Timing the launch will enable

you to reach the Mother ship (Super Bonus), or hit multiple UFOs to win tickets.

- 6 -

In game there are tiers of UFOs with different ticket values and Pigeons that fly across

the screen to obstruct the Pig’s flight. At the top of the screen there is one Mother ship,

which hitting will win the Super Bonus.

The Super Bonus value is dependant on the Game Settings.

Test Menu

The Main Test Menu lists all of the available tests, each of which is explained in the

following sections.

Use the Service button to move the Test Cursor to the next Test.

Use the Test Button to activate the Test high-lighted by the Test Cursor.

- 7 -

If the cursor is moved past the EXIT option, it will reappear at the top of the menu list.

Selecting EXIT will terminate the test routine menu and launch the current game

application.

System Information

The System Information Test lists the revision numbers and names of currently

installed system components.

Disk Image Version Version number for the master hard disk image

Launcher Version Version number of Shell Launcher program

Shell Version Version number of Shell program

Game Name Name of currently installed game

- 8 -

Gam e Vers ion Vers ion nu mbe r of currently installed game

IO B oar d Ver sio n Ver sio n nu mber of IO Board being used

Security Key Type of Security Key installed

Input Test

This Test is used to test the ‘System Inputs’ such as Seesaw Trigger and Start Button.

To implement the test, Operate each device listed and check the results on screen.

Start Button ON = Pressed, OFF = Not Pressed.

Seesaw Trigger ON = Pressed, OFF = Not Pressed.

Ticket Notch ON = Pressed, OFF = Not Pressed.

Key Switch ON = Pressed, OFF = Not Pressed.

Coin Input ON = Coin signal from VTS, OFF = No coin signal from

- 9 -