The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufacturers
and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega Amusements
Europe Ltd accepts its responsibility to nance the cost of treatment and recovery of redundant WEEE in the United Kingdom
in accordance with the specied WEEE recycling requirements.
The lowing symbol will be on all products manufactured from 13th August 2005, which
indicates this product must NOT be disposed of with other normal waste. Instead, it is
the user’s responsibility to dispose of their waste equipment by arranging to return it to a
designated UK collection point for the correct recycling of waste electrical and electronic
equipment.
For more information about where you can send your waste equipment for recycling contact
your local authority ofce.
[ For Europe Only ]
Battery Recycling Statement
The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimize the impact of batteries on the environment
and encourage the recovery of the materials they contain. To achieve increased collection and recycling of waste batteries, the
Directive places 'producer responsibility' obligations on manufacturers and importers of portable, industrial and automotive
batteries.
The following symbol will be on all equipment tted with batteries from 26th September
2008 and indicates they must NOT be disposed of with other normal waste. Instead, it is the
user’s responsibility to dispose of used batteries by
arranging to return them to a designated collection point for the correct recycling of waste
batteries.
For more information about where you can send your waste batteries for recycling contact
your local authority ofce.
[ For Europe Only ]
Page 3
Page 4
BEFORE USING THE PRODUCT,
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of
the operation of the product. After carefully reading and sufciently understanding the warning
displays and cautions, handle the product appropriately. Be sure to keep this manual close to the
product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.
BE SURE TO READ THE FOLLOWING:
Indicates that mishandling the
product by disregarding this
pictograph will cause severe
injury or death.
Indicates that mishandling the
product by disregarding this
warning will cause a potentially
hazardous situation which can
result in death or serious injury.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,
this display is attached to places where the Owner's Manual, Serviceman Manual and/or
Service Manual should be referred to.
Indicates a "Protective Earth Terminal." Before operating the equipment, be sure to
connect it to the Ground.
(The step may be omitted for products in which a power cord with earth is used.)
• Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention.
Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.
Indicates that mishandling
the product by disregarding
this caution will cause a slight
hazardous situation which can
result in personal injury and/or
material damage.
• Be sure to turn off the power before working on the machine.
To prevent an electric shock, be sure to turn off the power before carrying out any work that
requires direct contact with the interior of the product. If the work is to be performed in the
power-on status, the Instruction Manual herein always states to that effect.
• Be sure to ground the Earth Terminal.
(This is not required in the case where a power cord with earth is used.)
This product is equipped with the Earth Terminal. When installing the product, connect the
Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.
Unless the product is grounded appropriately, the user can be subject to an electric shock.
After performing repair, etc. for the control equipment, ensure that the Earth Wire is rmly
connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is
not equipped with the Earth Leakage Breaker can cause a re when earth leakage occurs.
• Be sure to use fuses which meet the specied rating.
(Only for the machines which use fuses.)
Using fuses exceeding the specied rating can cause a re and an electric shock.
Page 5
• Specication changes (removal of equipment, conversion and addition) not
designated by SEGA are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc.
It is very hazardous to operate the product by removing parts and/or modifying the circuits.
Should doors, lids and protective parts be damaged or lost, refrain from operating the product,
and contact where the product was purchased from or the ofce herein stated.
SEGA shall not be held responsible for any accidents, compensation for damage to a third
party, resulting from the specications not designated by SEGA.
• Ensure that the product meets the requirements of appropriate Electrical
Specications.
Before installing the product, check for Electrical Specications. SEGA products have
a nameplate on which Electrical Specications are described. Ensure that the product is
compatible with the power supply voltage and frequency requirements of the location. Using
any Electrical Specications different from the designated Specications can cause a re and
an electric shock.
• Install and operate the product in places where appropriate lighting is available,
allowing warning labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially
hazardous situations are applied to places where accidents can be caused. Ensure that where
the product is operated has sufcient lighting allowing the warnings to be read. If any label
is peeled off, apply it again immediately. Please place an order with where the product was
purchased from or the ofce herein stated.
• When handling the monitor, be very careful.
(Applies only to the product with a monitor.)
Some of the monitor (TV) parts are subject to high tension voltage. Even after turning off the
power, some portions are still subject to high tension voltage sometimes. Monitor repair and
replacement should be performed only by those technical personnel who have knowledge of
electricity and technical expertise.
• Be sure to adjust the monitor/projector properly.
(Applies only to the product with a monitor/projector.)
Do not operate the product leaving on-screen ickering or blurring as it is. Using the product
with the monitor/projector not properly adjusted may cause dizziness or a headache to an
operator, a player, or the customers.
• When transporting or reselling this product, be sure to attach this manual to
the product.
In the case where commercially available monitors and printers are used in this product,
only the contents relating to this product are explained herein. Some commercially available
equipment has functions and reactions not stated in this manual. Read this manual together
with the specic Instruction Manual of such equipment.
* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any question
arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are Casters and Adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct
way, connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cords have cuts and dents?
Do the fuses used meet specied ratings? Is the Circuit Protector in an energized status?
Are all accessories available?
Can all Doors and Lids be opened with the Accessory Keys? Can Doors and Lids be rmly
closed?
Page 6
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS ....................................................................................... i
1 HMR MAIN UNIT ........................................................................................ 1
1
TOP ASSY HMR YELLOW (HMR-00001) ................................................. 3
TOP ASSY HMR GREEN (HMR-00002) ................................................... 6
TOP ASSY HMR ORANGE (HMR-00003) ................................................ 8
TOP ASSY HMR BLUE (HMR-00004) .................................................... 10
From among the parts used for the product, regarding the stickers/sheets such as warning and cautionary
displays intended for players, and those describing the name of hazard prevention equipment such as the
Emergency Stop Button, etc., the ofcial language applicable to the installation location is employed. These
stickers/sheets are important parts from the point of view of safety and should be replaced immediately if
soiled or peeled off. The Parts List herein contains only the Parts Nos. of stickers/sheets described in English
(with sufxed E or EG or UK).
In the case where the asterisk mark “*” is indicated in the note column of the Parts List, that particular part has
the applicable ofcial language available. As such, when placing order, ensure that the corresponding ofcial
language is available for that particular part. For example, if you desire the stickers/sheets described in French,
sufx FR in lieu of UK.
However, note that if a common expression can be used, only one expression is registered for plural ofcial
languages and in this case, only one language is available.
The followings are the sufx character(s) of the Parts No. for the corresponding ofcial language;
E or EG or UK: English FR: French GM: German
SP: Spanish PT: Portuguese IT: Italian
DU: Dutch SW: Swedish NW: Norwegian
TABLE OF CONTENTS
Note that Parts List herein does not include the individual parts of assemblies and manufactured items. Be sure
to understand that inquiries and placing orders as regards the individual parts below may be unacceptable.
- Assemblies only for nished product sales (such as the printed circuit board on which ICs and fuses are
mounted).
- Manufactured items incorporated for this product (projectors, monitors, etc.). As a rule, the products listed in
Item No. 101 – 199 of the Parts List.
- Units which are assembled by employing welding, riveting and adhesives.
5 HMR-0600-01 ASSY CAR BODY YELLOW HMR-0600-01
6 HMR-1000 ASSY COCKPIT HMR-1000
8 HMR-0001 TIRE-L
9 HMR-0002 TIRE-R
10 HMR-0003 TIRE COVER-L
11 HMR-0004 TIRE COVER-R
12 HMR-0005-01 SIDE CAR BODY-L YELLOW
13 HMR-0006-01 SIDE CAR BODY-R YELLOW
14 SIDE STEP HMR-0007
15 HMR-0008-EG STICKER C USE RESTRICTION ENG HMR-0008-EG
16 HMR-0010-EG STICKER W POWER OFF SMALL ENG HMR-0010-EG
17 HMR-0011-EG STICEKR W POWER OFF LARGE ENG HMR-0011-EG
18 HMR-0012-EG STICKER C HANDLE GEAR ENG HMR-0012-EG
19 HMR-0013-EG STICKER C FENCE ENG HMR-0013-EG
21 HMR-0015-EG STICKER C FRP TIRE ENG HMR-0015-EG
22 HMR-0016-EG STICKER C SIDE STEP ENG HMR-0016-EG
23 HMR-0017 STICKER BAGGAGE HMR-0017
24 HMR-0018 STICKER SIDE STEP HMR-0018
25 HMR-0019 NON SLIP MAT SIDE STEP 1 HMR-0019
26 HMR-0020 NON SLIP MAT SIDE STEP 2 HMR-0020
27 HMR-0021 NON SLIP MAT SIDE STEP 3 HMR-0021
28 HMR-0022 NON SLIP MAT SIDE STEP 4 HMR-0022
38 HMR-0030 STICKER SHOCK HAZARD HMR-0030 <USA>
39 421-6690-12 STICKER 208V <USA>
421-6690-03 STICKER 220V (80556) <Hong Kong, Taiwan>
421-6119-04 STICKER 230V (230V AREA) <Singapore, Europe>
40 421-6119-91 STICKER FCC <USA>
41 421-12170 STICKER RATING SUIT ALL <USA>
5 HMR-0600-02 ASSY CAR BODY GREEN HMR-0600-02
6 HMR-1000 ASSY COCKPIT HMR-1000
8 HMR-0001 TIRE-L
9 HMR-0002 TIRE-R
10 HMR-0003 TIRE COVER-L
11 HMR-0004 TIRE COVER-R
12 HMR-0005-02 SIDE CAR BODY-L GREEN
13 HMR-0006-02 SIDE CAR BODY-R GREEN
14 SIDE STEP HMR-0007
15 HMR-0008-EG STICKER C USE RESTRICTION ENG HMR-0008-EG
16 HMR-0010-EG STICKER W POWER OFF SMALL ENG HMR-0010-EG
17 HMR-0011-EG STICEKR W POWER OFF LARGE ENG HMR-0011-EG
18 HMR-0012-EG STICKER C HANDLE GEAR ENG HMR-0012-EG
19 HMR-0013-EG STICKER C FENCE ENG HMR-0013-EG
21 HMR-0015-EG STICKER C FRP TIRE ENG HMR-0015-EG
22 HMR-0016-EG STICKER C SIDE STEP ENG HMR-0016-EG
23 HMR-0017 STICKER BAGGAGE HMR-0017
24 HMR-0018 STICKER SIDE STEP HMR-0018
25 HMR-0019 NON SLIP MAT SIDE STEP 1 HMR-0019
26 HMR-0020 NON SLIP MAT SIDE STEP 2 HMR-0020
27 HMR-0021 NON SLIP MAT SIDE STEP 3 HMR-0021
28 HMR-0022 NON SLIP MAT SIDE STEP 4 HMR-0022
38 HMR-0030 STICKER SHOCK HAZARD HMR-0030 <USA>
39 421-6690-12 STICKER 208V <USA>
421-6690-03 STICKER 220V (80556) <Hong Kong, Taiwan>
421-6119-04 STICKER 230V (230V AREA) <Singapore, Europe>
40 421-6119-91 STICKER FCC <USA>
41 421-12170 STICKER RATING SUIT ALL <USA>
5 HMR-0600-03 ASSY CAR BODY ORANGE HMR-0600-03
6 HMR-1000 ASSY COCKPIT HMR-1000
8 HMR-0001 TIRE-L
9 HMR-0002 TIRE-R
10 HMR-0003 TIRE COVER-L
11 HMR-0004 TIRE COVER-R
12 HMR-0005-03 SIDE CAR BODY-L ORANGE
13 HMR-0006-03 SIDE CAR BODY-R ORANGE
14 SIDE STEP HMR-0007
15 HMR-0008-EG STICKER C USE RESTRICTION ENG HMR-0008-EG
16 HMR-0010-EG STICKER W POWER OFF SMALL ENG HMR-0010-EG
17 HMR-0011-EG STICEKR W POWER OFF LARGE ENG HMR-0011-EG
18 HMR-0012-EG STICKER C HANDLE GEAR ENG HMR-0012-EG
19 HMR-0013-EG STICKER C FENCE ENG HMR-0013-EG
21 HMR-0015-EG STICKER C FRP TIRE ENG HMR-0015-EG
22 HMR-0016-EG STICKER C SIDE STEP ENG HMR-0016-EG
23 HMR-0017 STICKER BAGGAGE HMR-0017
24 HMR-0018 STICKER SIDE STEP HMR-0018
25 HMR-0019 NON SLIP MAT SIDE STEP 1 HMR-0019
26 HMR-0020 NON SLIP MAT SIDE STEP 2 HMR-0020
27 HMR-0021 NON SLIP MAT SIDE STEP 3 HMR-0021
28 HMR-0022 NON SLIP MAT SIDE STEP 4 HMR-0022
38 HMR-0030 STICKER SHOCK HAZARD HMR-0030 <USA>
39 421-6690-12 STICKER 208V <USA>
421-6690-03 STICKER 220V (80556) <Hong Kong, Taiwan>
421-6119-04 STICKER 230V (230V AREA) <Singapore, Europe>
40 421-6119-91 STICKER FCC <USA>
41 421-12170 STICKER RATING SUIT ALL <USA>
5 HMR-0600-04 ASSY CAR BODY BLUE HMR-0600-04
6 HMR-1000 ASSY COCKPIT HMR-1000
8 HMR-0001 TIRE-L
9 HMR-0002 TIRE-R
10 HMR-0003 TIRE COVER-L
11 HMR-0004 TIRE COVER-R
12 HMR-0005-04 SIDE CAR BODY-L BLUE
13 HMR-0006-04 SIDE CAR BODY-R BLUE
14 SIDE STEP HMR-0007
15 HMR-0008-EG STICKER C USE RESTRICTION ENG HMR-0008-EG
16 HMR-0010-EG STICKER W POWER OFF SMALL ENG HMR-0010-EG
17 HMR-0011-EG STICEKR W POWER OFF LARGE ENG HMR-0011-EG
18 HMR-0012-EG STICKER C HANDLE GEAR ENG HMR-0012-EG
19 HMR-0013-EG STICKER C FENCE ENG HMR-0013-EG
21 HMR-0015-EG STICKER C FRP TIRE ENG HMR-0015-EG
22 HMR-0016-EG STICKER C SIDE STEP ENG HMR-0016-EG
23 HMR-0017 STICKER BAGGAGE HMR-0017
24 HMR-0018 STICKER SIDE STEP HMR-0018
25 HMR-0019 NON SLIP MAT SIDE STEP 1 HMR-0019
26 HMR-0020 NON SLIP MAT SIDE STEP 2 HMR-0020
27 HMR-0021 NON SLIP MAT SIDE STEP 3 HMR-0021
28 HMR-0022 NON SLIP MAT SIDE STEP 4 HMR-0022
38 HMR-0030 STICKER SHOCK HAZARD HMR-0030 <USA>
39 421-6690-12 STICKER 208V <USA>
421-6690-03 STICKER 220V (80556) <Hong Kong, Taiwan>
421-6119-04 STICKER 230V (230V AREA) <Singapore, Europe>
40 421-6119-91 STICKER FCC <USA>
41 421-12170 STICKER RATING SUIT ALL <USA>
1 HEAD LAMP BOX MAIN HMR-0651 2 HEAD LAMP SIDE COVER-L HMR-0652 3 HEAD LAMP SIDE COVER-R HMR-0653 4 HEAD LAMP FRONT PLATE HMR-0654 5 HEAD LAMP REAR PLATE HMR-0655
101 838-14889 LED BD ESU-00-RA02P SIM ESU-00-RA02P
201 ROUND SEMS SCREW M4x8L SR04-008NNB
202 ROUND SEMS SCREW M3x8L SR03-008NNW
301 RA-3411[JST] TO HEAD LAMP(L) (800mm) HMR-C2-006
302 HEAD LAMP(L) TO HEAD LAMP[R] (1300mm) HMR-C2-011
301 DRIVER SW BD TO RS422 MOTOR DRIVER[R] (360mm) HMR-C2-020
302 DRIVER SW BD TO RS422 MOTOR DRIVER[L] (450mm) HMR-C2-021
303 AC100V TO MOTOR DRIVER[L],[R](2) (600mm,600mm) HMR-C2-022
304 MOTOR DRIVER[L] TO HANDLE ENCODER (1070mm) HMR-C2-024
305 MOTOR DRIVER[L] TO HANDLE POWER (1250mm) HMR-C2-025
308 MOTOR DRIVER[R] TO HANDLE ENCODER (670mm) HMR-C2-028
309 MOTOR DRIVER[R] TO HANDLE POWER (800mm) HMR-C2-029
312 CABIN1 CONNECTION BD1 RA-5011[JST] HMR-C1-002
313 BOOST BD TO BOOST SW, LAMP BD(1) HMR-C1-010
314 BOOST BD TO BOOST SOLEN01D HMR-C1-011
47
Page 57
29 ASSY MECHA BASE (HMR-3000) (D-1/3)
1
HMR MAIN UNIT
48
Page 58
29 ASSY MECHA BASE (HMR-3000) (D-2/3)
ITEM NO. PART NO. DESCRIPTION NOTE
1 HMR-3100 ASSY SUB CABI MECHA BASE HMR-3100
2 HMR-3200 ASSY BALL JOINT BASE HMR-3200
3 HMR-3250 ASSY BASE SIDE DOOR HMR-3250
4 HMR-3300 FAN UNIT HMR-3300
5 HMR-3400 ASSY FRONT REFLECTOR HMR-3400
6 HMR-3450 ASSY REAR REFLECTOR HMR-3450
7 HMR-3500 ASSY GUIDE RAIL HMR-3500
8 HMR-3600 ASSY LAN CONNECTOR HMR-3600
9 HMR-3700 AC UNIT HMR-3700
10 HMR-3800 ASSY AC IN HMR-3800
11 HMR-4000 ASSY MAIN ELEC HMR-4000
12 HMR-4100 ASSY SUB ELEC HMR-4100
13 HMR-4200 ASSY ACTUATOR DRIVER HMR-4200
14 ELEC COVER HMR-3001
15 MAIN ELEC SUB PLATE HMR-3002
16 SUB ELEC SUB PLATE HMR-3003
17 CONT UNIT SUB PLATE HMR-3004
18 AC UNIT WIRE COVER HMR-3005
19 TRANS COVER HMR-3006
20 AC UNIT COVER HMR-3007
21 SUB ELEC COVER HMR-3008
22 CONT UNIT COVER HMR-3009
23 LAN CONNECTOR COVER HMR-3010
24 FRONT SENSOR COVER HMR-3011
25 FOOT SENSOR FIX BRKT HMR-3012
26 SENSOR ADJUST BRKT-L HMR-3013
27 SENSOR ADJUST BRKT-R HMR-3014
28 ZD SENSOR BRKT HMR-3015
29 REAR SENSOR COVER HMR-3016
30 253-5460-01 AIR VENT BLACK
31 STICKER LAN CONNECTION BD COVER HMR-3017
301 RA-3411[JST] TO REAR SENSOR (800mm) HMR-C2-008
302 RA-3411[JST] TO RIGHT SENSOR (800mm) HMR-C2-009
303 RA-3411[JST] TO FRONT SENSOR (800mm) HMR-C2-012
304 RA-3411[JST] TO LEFT SENSOR (800mm) HMR-C2-013
1
HMR MAIN UNIT
305 COIN CHUTE TOWER EXTERNAL AC220V (1850mm) HMR-C2-016
306 HANDLE DRIVER BD PNL EARTH LINE (320mm) HMR-C2-033
307 DC 5557-12P SW REGU TO COIN CHUTE (2) (2000mm) HMR-C2-034
308 CABIN PNL EARTH LINE (2830mm) HMR-A-019
309 SCU EARTH LINE (400mm) HMR-A-020
310 POU EARTH LINE (600mm) HMR-A-021
311 MCU EARTH LINE ((500mm) HMR-A-022
312 AC BLACK&WHITE LINE TB TO MAIN TRANS(2) (470mm) HMR-A-015
313 AC220V TO POU (400mm) HMR-A-016
314 AC100,110V TO POU (400mm) HMR-A-017
315 MAIN TRANS EARTH LINE (340mm) HMR-A-018
316 AC110V (1) TO SCU SW REGU (2100mm) HMR-S-004
317 AC100/110V(1) INPUT (2100mm) HMR-P-001
318 HUB DC JACK (2100mm) HMR-P-006
319 DC5V ,12V, 24V (1) TO SCU (1370mm) HMR-P-008
320 BASE DC12V FAN 1,2(2) (670mm, 1000mm) HMR-P-011
321 AC220V (2) ACU TO JC BD AC220V (2150mm) HMR-P-020
322 AC220V (2) JC BD AC220V TO MCU (2000mm) HMR-P-022
323 AC220V (2) JC BD AC220V TO MONITOR (3090mm) HMR-P-024
324 DC12V, 5V (2) DC0512 JC BD2 TO MCU (1570mm) HMR-P-026
325 CAN MOTOR DRIVER BD1 TO SCU (1850mm) HMR-M-007
326 MOTOR1 ENCODER, LIMIT (1940mm) HMR-M-008
327 MOTOR2 ENCODER, LIMIT (1770mm) HMR-M-009
328 MOTOR POWER(2) BD1,BD2 (980mm,1140mm) HMR-M-019
1 LAN CONNECTOR PLATE HMR-3601
2 STICKER LAN CONNECTOR NUMBER HMR-3602
101 LAN CONNECTION BD EMU-00-R630M
201 ROUND SEMS SCREW M3x8L SR03-008NNW
58
Page 68
38 AC UNIT (HMR-3700)
1
HMR MAIN UNIT
ITEM NO. PART NO. DESCRIPTION NOTE
1 AC UNIT BOX HMR-3701
2 STICKER AC UNIT HMR-3702
3 STICKER INPUT VOLTAGE SELECT HMR-3703
4 STICKER BMK POWER ON/OFF HMR-3704
5 INSULATOR FOR NF HMR-3705 <Taiwan>
6 STICKER CIRCULT BREAKER HMR-3706 <USA>
301 AC INPUT N LINE (120mm) HMR-A-001
302 AC INPUT L LINE (90mm) HMR-A-002
303 MAIN EARTH LINE (140mm) HMR-A-003
304 AC WHITE LINE CB TO POWER SW (470mm) HMR-A-004
305 AC BLACK LINE CB TO POWER SW (450mm) HMR-A-005
306 AC WHITE LINE TO GMC (460mm) HMR-A-006
307 AC BLACK LINE TO GMC (450mm) HMR-A-007
308 AC BLACK LINE CB TO GMC (90mm) HMR-A-008
309 AC WHITE LINE CB TO GMC (120mm) HMR-A-009
310 AC BLACK LINE GMC TO NF1 (170mm) HMR-A-010
311 AC WHITE LINE GMC TO NF1 (170mm) HMR-A-011
312 AC BLACK LINE NF2 TO TB (270mm) HMR-A-012
313 AC WHITE LINE NF2 TO TB (229mm) HMR-A-013
314 AC BLACK&WHITE LINE TB TO MAIN TRANS(1) (240mm) HMR-A-014
315 AC BLACK LINE NF1 TO NF2 (110mm) HMR-A-023
316 AC WHITE LINE NF1 TO NF2 (120mm) HMR-A-024
1 MAIN ELEC PLATE HMR-4001
2 SW REGU ATX/JVS BRKT HMR-4002
3 844-0001D-92-12 ASSY CASE LBG L 1GB 7800 EXP <Asia, Europe>
844-0001D-92-11 ASSY CASE LBG L 1GB 7800 USA <USA>
4 837-14505 I/O CONTROL BD FOR JVS
301 AC100/110V(2) INPUT (560mm) HMR-P-002
302 AC110V TO SCU SW REGU (470mm) HMR-P-003
303 AC100V TO CABIN MOTOR DRIVER (450mm) HMR-P-004
304 AC110V TO CABIN2 COIN CHUTE (470mm) HMR-P-005
305 HUB DC JACK 12V (270mm) HMR-P-007
306 DC5V ,12V, 24V (2) TO SCU (230mm, 230mm, 380mm) HMR-P-009
307 BASE DC12V FAN 1,2(1) (460mm) HMR-P-010
308 SMPS1 AC220V INPUT (520mm) HMR-P-014
309 SMPS2 AC220V INPUT (520mm) HMR-P-015
310 SMPS3 AC220V INPUT (590mm) HMR-P-016
311 SMPS2 12V,5V (500mm) HMR-P-017
312 DC0512 JC BD2 AC220V INPUT (100mm) HMR-P-018
313 AC220V (1) ACU TO JC BD AC220V (650mm, 680mm) HMR-P-019
314 AC220V (1) JC BD AC220V TO MCU (680mm) HMR-P-021
315 AC220V (1) JC BD AC220V TO MONITOR (620mm) HMR-P-023
316 DC12V, 5V (1) DC0512 JC BD2 TO MCU (450mm) HMR-P-025
317 AC100V R-0 JUMPER LINE (70mm) HMR-P-027
62
Page 72
42 ASSY ACTUATOR DRIVER (HMR-4200)
1
HMR MAIN UNIT
ITEM NO. PART NO. DESCRIPTION NOTE
1 ACTUATOR DRIVER PLATE HMR-4201
101 835-14886 MOTOR DRIVER EMU-01-R501MA SIM EMU-01-R501MA
102 CABLE TIE J-140 BLK EEC-10-R071P
103 ZCAT3035-1330 [TDK] EEC-03-R203P
201 ROUND SEMS SCREW M4x10L SR04-010NNW
301 AC220V INPUT MOTOR DRIVER BD1,BD2 (300mm,540mm) HMR-M-001
302 DC5V ,12V, 24V (3) TO SCU (460mm, 640mm, 600mm) HMR-M-002
303 CAN MOTOR DRIVER BD1 (390mm) HMR-M-003
304 ENCODER, LIMIT MOTOR DRIVER BD1 (350mm, 310mm) HMR-M-004
305 ENCODER, LIMIT MOTOR DRIVER BD2 (560mm, 510mm) HMR-M-005
306 MOTOR POWER BD1,BD2 (890mm, 750mm) HMR-M-006
307 CAN MOTOR DRIVER BD2 (560mm) HMR-M-010
308 AC 220R LINE MOTOR DRIVER BD1 (140mm) HMR-M-011
309 AC 220T LINE MOTOR DRIVER BD1 (150mm) HMR-M-012
310 E-BRAKE MOTOR DRIVER BD1 (140mm) HMR-M-013
311 FAN1, FAN2 12V MOTOR DRIVER BD1 (240mm, 210mm) HMR-M-014
312 AC 220R LINE MOTOR DRIVER BD2 (140mm) HMR-M-015
313 AC 220T LINE MOTOR DRIVER BD2 (150mm) HMR-M-016
314 E-BRAKE MOTOR DRIVER BD2 (140mm) HMR-M-017
315 FAN 12V MOTOR DRIVER BD2 (240mm, 210mm) HMR-M-018
316 BR LINE MOTOR DRIVER BD1 (130mm) HMR-M-022
317 BR LINE MOTOR DRIVER BD2 (130mm) HMR-M-023
63
Page 73
43 ASSY ACTUATOR-L (HMR-1500-01)
1
HMR MAIN UNIT
ITEM NO. PART NO. DESCRIPTION NOTE
1 BASE PLATE AD180-120-0001
2 POST AD180-120-0002
3 JOINT FLANGE AD180-120-0021
4 REED SW BRACKET AD180-120-0022
6 A/T JOINT (100x100) MMB-00-001M
7 AC SERVO MOTOR(APM-SE12ASW-SL) [METRONIX] AD180-120-0101
8 HMR-1501-EG STICKER HOT SURFACE-ENG HMR-1501-EG <USA>
HMR-1501-CE STICKER HOT SURFACE-CE HMR-1501-CE <Others>
The DC power wire color for this product is different from previous SEGA titles.
Working from the previous wire colors will create a high risk of re.
3
WIRE COLOR CODE TABLE
The color codes for the wires used in the diagrams in the following chapter are as follows.
CODE WIRE COLOR
10 RED
20 BLUE
30 YELLOW
40 GREEN
50 WHITE
70 ORANGE
80 BLACK
90 GRAY
A PINK
B SKY BLUE
C BROWN
D PURPLE
E LIGHT GREEN
4
WIRING DIAGRAM
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side
numeral (see the above).
Note 1: If the right-hand side numeral is not 0, that particular wire has a spiral color code.
The left-hand side character shows the base color and the right-hand side one, the spiral color.
<Example> 51………WHITE/RED
Note 2: The character following the wire color code indicates the size of the wire.
U: AWG16
K: AWG18
L: AWG20
None: AWG22
4 WIRING DIAGRAM
RED
WHITE
68
[ For Europe Only ]
This manual does not include the circuit diagram in order to prevent hazards that might arise while the Serviceman
is performing work based on his own discretion. Part replacement of the unit (IC Board, Projector, Switch
Regulator, etc.) which does not have the circuit diagram can cause shock hazard and parts damage.
Should it be necessary to replace parts for the unit, which does not have the circuit diagram, contact where you
purchased the product from for inquiries regarding this matter. Be sure to understand that depending on the specic
units and parts, inquiries and placing orders for the specic parts may be unacceptable.
Page 78
(D-1/6)
YE/GR_2.5YE/GR_2.5
WH_2.5
WH_2.5
BK_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
BK_2.5BK_2.5
BK_2.5
WH_2.5
WH_2.5
BK_1.5
BK_1.5
WH_1.5
WH_1.5
WH_1.5
WH_1.5
YE/GR_2.5
YE/GR_2.5
YE/GR_2.5
YE/GR_2.5
WH_2.5
WH_2.5
WH_2.5
WH_2.5
BK_2.5
BK_2.5
WH_2.5
BK_2.5
WH_2.5
YE/GR_2.5
WH_2.5
WH_2.5
BK_2.5
BK_2.5BK_2.5
BK_1.0
WH_1.0
WH_2.5
BK_1.0
WH_1.0
WH_2.5
AC INPUT N
AC INPUT L
EARTH
BHTB-DS2K [BUMHAN]
0+
0V+
100V+
110V+
220V+
G(Earth)
208V
230V
220V
240V
0V
200V
HMR-A-018
HMR-A-017
HMR-A-016
HMR-A-015
Base Frame Earth
HMR-A-019
HMR-A-020
HMR-A-021
HMR-A-022
to (5/X), pos. G1
①
②
to (5/X), pos. A1
HMR-A-012
HMR-A-013
HMR-A-014
MASKING EARTH
MAIN INPUT
POWER SOURCE
(WITH EARTH)
HMR-A-002
HMR-A-001
HMR-A-003
ACU PNL EARTH
HMR-A-023
HMR-A-024
MASKING EARTH
HMR-A-006HMR-A-007
HMR-A-008
HMR-A-009
HMR-A-004HMR-A-005
HMR-A-010
HMR-A-011
50Hz(204V~264VAC)
60Hz(187V~242VAC)
UL: DCP-51-DF15A [DaeRyuk]*2
2.5-4
Φ2.5-4Φ
2.5-4
Φ
2.5-4Φ
2.5-4
Φ
0V
200V
208V
220V
230V
240V
2.5-4Φ
2.5-4Φ
2.5-4Φ
EMU-40-R105M
HMR-3000 ASSY MECHA BASE
HMR-3700 AC UNIT
HMR-3800
HMR-3000
VLP-08V [JST]VLP-08V [JST]
1234567
8
EMU-29-R317P
CE: BKM-B-2P/15A [LSIS]
EMU-29-R317P
CE: BKM-B-2P/15A [LSIS]
4
3
1
2
YLP-03V [JST]YLP-03V [JST]
1
2
3
11b
22b
ESU-35-R211P
KCD4-201 [GEC]
11b
22b
ESU-35-R211P
KCD4-201 [GEC]
EEC-10-R065P
DFT 20A-8P [Dong-A]
EEC-10-R065P
DFT 20A-8P [Dong-A]
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
CABIN PNL EARTHCABIN PNL EARTH
ES1-T15 /15A [DIT]
EMU-30-R109P
ES1-T15 /15A [DIT]
EMU-30-R109P
1
2
4
3
E
BASE FRAME EARTHBASE FRAME EARTH
EMU-27-R112P
GMC22 /20A [LGIS]
EMU-27-R112P
GMC22 /20A [LGIS]
5
A1
A2
1
34
6
2
SCU PART FRAME EARTHSCU PART FRAME EARTH
POU PNL EARTHPOU PNL EARTH
MCU PNL EARTHMCU PNL EARTH
2.5-4Φ2.5-4Φ
SCU PART BASE FRAME EARTHSCU PART BASE FRAME EARTH
POU PART BASE FRAME EARTHPOU PART BASE FRAME EARTH
MCU PART BASE FRAME EARTHMCU PART BASE FRAME EARTH