Seeley WF30, WF40 Owner's Manual

(English) (WF30/40)

OWNER’S MANUAL

Wall Furnace - WF30/40

1

WF30/40

Gas control knob

Igniter button

Pilot meter

Fan

Auto / Boost

switch

IMPORTANT MAINTENANCE (AND WARRANTY) INFORMATION

As with any product that has moving parts or is subject to wear and tear, it is VERY
IMPORTANT that you maintain your wall furnace and have it regularly serviced. It is a

condition of warranty cover for your wall furnace that you comply with all of the maintenance
and service requirements set out in this Owner’s Manual. Compliance with these
requirements will prolong the life of your wall furnace. Further, it is also a condition of
warranty cover that each item in the Maintenance Schedule in this Owner’s Manual is
performed with the frequency indicated, by a qualified, licensed technician, and that the
Maintenance Schedule is properly filled out (ie names, signature, date, and action taken)
when the item is completed. ANY FAILURE TO CARRY OUT THE REQUIRED

MAINTENANCE AND SERVICING REQUIREMENTS, AND ANY FAILURE TO PROPERLY
FILL OUT THE MAINTENANCE SCHEDULE, WILL VOID YOUR WARRANTY.

Warning

DO NOT: Place articles on or against this appliance.
DO NOT: Use or store flammable materials near this appliance
DO NOT: Spray aerosols in the vicinity of this appliance while it is in operation.
DO NOT: Modify this appliance.

IMPORTANT

If for any reason your heater experiences,

a POWER FAILURE

, the “Pilot Flame” is

TURNED OFF, or GOES OUT, a period of up to

5 minutes is required for the heater to reset.

If the heater has not reset, the

“Gas control knob” will NOT turn easily.

PLEASE DO NOT FORCE

Damage to the mechanism may occur.

Care Instructions

External surfaces should be cleaned with warm water and detergent with the heater turned off.
Do not use abrasive cleaners as scratching of the surface will occur.