Seeley SDHV14D1S, SDHV07D1S, SCHV07D1S, SCHV14D1S, SCHV16D1S Owner's Manual

OWNER’S MANUAL

DUCTED INVERTER

(English) (SDHVD1S SERIES)

IMPORTANT

As with any product that has moving parts or is subject to wear and tear, it is

VERY IMPORTANT

serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.

OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.

(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit
download the terms.

that you maintain your air conditioner and have it regularly

ANY FAILURE TO CARRY

www.seeleyinternational.com/warranty

to

Warranty terms are subject to property access and industry safety standards.)

INDOOR MODEL OUTDOOR MODEL CAPACITY

COOL / HEAT

SDHV07D1S SCHV07D1S 7.0 kW / 8.0 kW

SDHV10D1S SCHV10D1S 10.0 kW / 12.0 kW

SDHV12D1S SCHV12D1S 12.0 kW / 13.8 kW

SDHV14D1S SCHV14D1S 13.7 kW / 16.0 kW

SDHV16D1S SCHV16D1S 16.0 kW / 18.0 kW

SDHVD1S Series Inverter Uniti

MAIN COMPONENTS.........................................................................................2

INTRODUCTION & SAFETY ..............................................................................3

OPERATION

WIRED CONTROLLER .................................................................................4

CONTROLLER LAYOUT...............................................................................4

LCD ICONS ................................................................................................5-6

BUTTON FUNCTIONS...............................................................................6-7

ON/OFF .........................................................................................................7

MODE, TEMPERATURE, FAN SETTING .....................................................8

RIGHT, LEFT SWING FUNCTION ................................................................9

UP, DOWN SWING FUNCTION ..................................................................10

TIMER SETTING ....................................................................................11-12

AIR EXCHANGE SETTING....................................................................12-13

SLEEP SETTING ...................................................................................13-15

HEALTH SETTING .................................................................................15-16

I-DEMAND SETTING .............................................................................16-17

VACATION SETTING.............................................................................17-18

TURBO FUNCTION SETTING...............................................................18-19

SAVE FUNCTION SETTING ..................................................................19-21

E-HEATER SETTING .............................................................................21-22

BLOW FUNCTION SETTING.................................................................22-23

FILTER SETTING ...................................................................................23-25

QUIET FUNCTION SETTING......................................................................26

ULTRA-DRY SETTING................................................................................27

LOCK FUNCTION .......................................................................................27

MEMORY FUNCTION .................................................................................27

CENTIGRADE - FAHRENHEIT...................................................................27

AMBIENT TEMPERATURE ENQUIRY .......................................................27

INDOOR FAN SHUTDOWN MODE ............................................................28

ERROR DISPLAY...................................................................................29-31

MAINTENANCE & SERVICE............................................................................32

MAINTENANCE SCHEDULE ...........................................................................33

OPERATION TIPS.............................................................................................34

TROUBLESHOOTING ......................................................................................35

SEELEY INTERNATIONAL – OWNER’S MANUAL 1

CONTENTS

CONTENTS

MAIN COMPONENTS.........................................................................................2

INTRODUCTION & SAFETY ..............................................................................3

OPERATION

WIRED CONTROLLER .................................................................................4

CONTROLLER LAYOUT...............................................................................4

LCD ICONS ................................................................................................5-6

BUTTON FUNCTIONS...............................................................................6-7

ON/OFF .........................................................................................................7

MODE, TEMPERATURE, FAN SETTING .....................................................8

RIGHT, LEFT SWING FUNCTION ................................................................9

UP, DOWN SWING FUNCTION ..................................................................10

TIMER SETTING ....................................................................................11-12

AIR EXCHANGE SETTING....................................................................12-13

SLEEP SETTING ...................................................................................13-15

HEALTH SETTING .................................................................................15-16

I-DEMAND SETTING .............................................................................16-17

VACATION SETTING.............................................................................17-18

TURBO FUNCTION SETTING...............................................................18-19

SAVE FUNCTION SETTING ..................................................................19-21

E-HEATER SETTING .............................................................................21-22

BLOW FUNCTION SETTING.................................................................22-23

FILTER SETTING ...................................................................................23-25

QUIET FUNCTION SETTING......................................................................26

ULTRA-DRY SETTING................................................................................27

LOCK FUNCTION .......................................................................................27

MEMORY FUNCTION .................................................................................27

CENTIGRADE - FAHRENHEIT...................................................................27

AMBIENT TEMPERATURE ENQUIRY .......................................................27

INDOOR FAN SHUTDOWN MODE ............................................................28

ERROR DISPLAY...................................................................................29-31

MAINTENANCE & SERVICE............................................................................32

MAINTENANCE SCHEDULE ...........................................................................33

OPERATION TIPS.............................................................................................34

TROUBLESHOOTING ......................................................................................35

SEELEY INTERNATIONAL - OWNER’S MANUAL

1

MAIN COMPONENTS

INDOOR UNIT

1

3

OUTDOOR UNIT

2

1. Power Cord

2. Wired Controller

3. Binding tape

4. Liquid Pipe

5. Gas Pipe

6. Drain Pipe

Air inlet

Air outlet

654

SDHVD1S Series Inverter Unit2

INTRODUCTION & SAFETY

Congratulations on purchasing a new
Braemar Air Conditioner!

Please keep this Manual and the
Warranty Booklet in a safe place,
along with the original purchase
documents, plus all relevant
certificates of compliance relating to
the installation work performed. Please
register the Warranty straight away, by
following the steps set out in the
Warranty Booklet.

The installer must read the Installation
Manual before installing the Braemar
Ducted Inverter Air Conditioning Unit.
The home owner/user should read the
Owner's Manual before operating the
Unit.

To ensure the warranty on the Unit is
continued and valid, the Unit must be
checked and serviced by the home
owner/user as per the requirements in
the Maintenance & Service section
and the Maintenance Schedule. This
will also prolong the life of your air
conditioner.

The home owner/user should regularly
check the Air Inlet side of the Outdoor
unit (see the diagram on page 2) to
ensure grass, leaf and other matter are
not drawn into or onto the Inlet side of
the Outdoor unit. Restriction to the air
flow across the coil will reduce the
system's capacity, and result in high
operation pressures and excessive
operating costs.

A return air filter MUST be installed by
the installer at the return air grille. The
air filter should be inspected and
cleaned at least every two weeks

when the Braemar
Conditioning Unit

Ducted Inverter Air

is used. Note: the
manufacturer recommends that low
level return air grilles are installed.

IMPORTANT!

THE AUSTRALIAN GREENHOUSE
OFFICE HAS ISSUED VARIOUS
REGULATIONS ON THE USE AND
DISPOSAL OF REFRIGERANTS IN
THE UNIT. FAILURE TO FOLLOW
THESE REGULATIONS MAY HARM
THE ENVIRONMENT AND COULD
LEAD TO THE IMPOSITION OF
SUBSTANTIAL FINES.

WHERE SPECIFIED, ONLY
QUALIFIED AND LICENSED
TECHNICIANS SHOULD PERFORM
WORK ON THIS UNIT, FAILING
WHICH THE WARRANTY ON THE
UNIT WILL BE VOID.

WARNING! This appliance is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.

Children should be supervised to
ensure that they do not play with the
appliance.

If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.

SEELEY INTERNATIONAL - OWNER’S MANUAL

3

OPERATION

Your Braemar
Conditioning Unit

Ducted Inverter Air

has been designed
and built with reliable, quality
components. To ensure many years of
trouble free, dependable service
please read the following pages very
carefully, and please ensure that you
follow all of the instructions.

WIRED CONTROLLER

Please follow the below cautionary
notes when using the wired controller:-

1. Do not install the wired controller in
a damp place or under direct sunlight.

2. Do not abuse, toss, or frequently
assemble/disassemble the wired
controller.

3. Do not operate the wired controller
with wet hands and never let any liquid
flow into it.

4. Do not install or remove the wired
controller by yourself. If necessary,
please contact a service agent.

CONTROLLER LAYOUT

Appearance and LCD Icons

Wired Controller appearance

5. This wired controller is applicable to
various kinds of air conditioners ­some specific functions unavailable to
the duct type air conditioners will be
covered in this manual.

6. Before operating the air conditioner,
please read this manual carefully and
keep it in a safe place for future
reference.

SDHVD1S Series Inverter Unit4

LCD Icon Layout

No. Icons Introduction

1 Left and right swing function

2 Up and down swing function

3 Air exchange function

4 Sleep function

5 Auto mode

6 COOL mode

7 DRY mode

8 FAN mode

9 HEAT mode

10 Health function

11 I-Demand function

12 Vacation function

13 Status display of master and slave wired controller

14

Shield function
The button operation, temperature setting, "On/Off" operation, "Mode"
setting, and "Save" setting are disabled.

15 Fan speed

16

Memory function
The unit will resume the original setting state after power recovery.

17 Turbo function

18 Energy-saving function

19 Ambient/setting temperature

OPERATION cont.

SEELEY INTERNATIONAL – OWNER’S MANUAL 5

LCD ICONS

OPERATION cont.

LCD ICONS

No. Icons Introduction

1

2

3

4

5

6

7

8

9

10

11

12

13

Left and right swing function

Up and down swing function

Air exchange function

Sleep function

Auto mode

COOL mode

DRY mode

FAN mode

HEAT mode

Health function

I-Demand function

Vacation function

Status display of master and slave wired controller

Shield function

14

15

16

17

18

19

The button operation, temperature setting, "On/Off" operation, "Mode"
setting, and "Save" setting are disabled.

Fan speed

Memory function
The unit will resume the original setting state after power recovery.

Turbo function

Energy-saving function

Ambient/setting temperature

SEELEY INTERNATIONAL - OWNER’S MANUAL

5

OPERATION cont.

LCD ICONS cont.

20 Electric heater

21

22

23

24

25

26

27

Blow function

Defrosting function

Filter cleaning

Timer Setting

Keycard control / Detected status sensed by human body

Quiet function

Lock function

BUTTON FUNCTIONS

1 Enter/Cancel

2

6

▲

▼

SDHVD1S Series Inverter Unit6

noitcudortnI noitcnuFsnottuB sserP.oN

• Function selection and canceling;

• Press for 5s to display the outdoor and indoor ambient temperature.

• Running temperature setting of indoor unit, range :16~30°C

• Timer setting, range:0.5-24hr

• Air function setting

• Save setting

• Filter clean setting

OPERATION cont.

BUTTON FUNCTIONS cont.

3 Fan

4 Mode Selection of the COOL, HEAT, FAN or DRY mode.

5 Function

7 Timer Timer setting.

8 On/Off Turn on/off indoor unit.

4 mode

and 2 ▲

2 ▲

and 6 ▼

4 mode

and 6 ▼

Memory

Lock

°F/°C

ON / OFF

Select fan speed from high, mid-high, middle, mid-low, low and auto
levels.

Switchover among these functions of SWING/AIR/SLEEP/HEALTH/
I-DEMAND/VACATION/TURBO/SAVE/E-HEATER/BLOW/QUIET.

Press Mode and at the same time for 5s under the OFF state of the▲
unit to activate/deactivate memory function (If memory is set, indoor unit
will resume original setting state after power recovery. If not, indoor unit is
defaulted to be OFF after power recovery. Memory function is defaulted to
be ON).

Under the ON state of the unit without any malfunction or under the OFF
state of the unit, press and buttons at the same time for 5s to go to▲ ▼
the lock state. In this case, any other buttons won’t respond the press.
Repress and again for 5s to quit the lock state.▲ ▼

Under the OFF state of the unit, press the Mode and at the same time▼
for 5s to switch the temperature scale between Celsius and Fahrenheit.

noitcudortnI noitcnuFsnottuB sserP.oN

Press the On/Off button to turn the unit
on or off.

OFF State of the Unit

ON State of the Unit

SEELEY INTERNATIONAL - OWNER’S MANUAL

7

OPERATION cont.

MODE SETTING

Under the ON state of the unit, press
the Mode button to switch the
operation modes as the sequence
shown below.

Auto Cooling Dry Fan Heating

FAN SPEED SETTING

Press the Fan button to vary the
speeds as shown in the sequence
below.

Low Mid-low Mid-highMiddle

TEMPERATURE SETTING

Press or button to increase or

▲ ▼

decrease setting temperature when
the unit is on. Pressing either of them
continuously, temperature will be
increased or decreased by 1°C every

0.5s.

In Cooling, Dry, Fan and Heating
mode, temperature setting range is
16°C - 30°C.

In Auto mode, the setting temperature
is not adjustable.

SDHVD1S Series Inverter Unit8

Auto

HighSuper-high

OPERATION cont.

SEELEY INTERNATIONAL – OWNER’S MANUAL

9

RIGHT / LEFT SWING FUNCTION

Under the ON state of unit, press the
Function button to select the "Right
and Left Swing" function option and
then press the Enter/Cancel button to
activate it.

When the Swing function is activated,
press the Function button to select the
"Right and Left Swing" function option
and then press the Enter/Cancel
button to deactivate it.

“Right and Left Swing” function setting
is as shown below

Unit On, no
right-left swing

Press “Function”
button to set

swing function

right-

left

Press “Function”
button to set

swing function

right-

left

Press “Enter/
Cancel” button to
activate
swing function

right-left

Press “Enter/
Cancel” button to
cancel
swing function

right-left

OPERATION cont.

RIGHT / LEFT SWING FUNCTION

Under the ON state of unit, press the
Function button to select the "Right
and Left Swing" function option and
then press the Enter/Cancel button to
activate it.

When the Swing function is activated,
press the Function button to select the
"Right and Left Swing" function option
and then press the Enter/Cancel
button to deactivate it.

“Right and Left Swing” function setting
is as shown below

Unit On, no
right-left swing

Press “Enter/
Cancel” button to
activate
swing function

Press “Function”
button to set
left

Press “Enter/
Cancel” button to
cancel
swing function

right-left

swing function

right-left

right-

Press “Function”
button to set

swing function

left

right-

SEELEY INTERNATIONAL - OWNER’S MANUAL

9

OPERATION cont.

UP / DOWN SWING FUNCTION

Under the ON state of unit, press the
Function button to select the "Up and
Down Swing" function option and then
press the Enter/Cancel to activate it.

When the Swing function is activated,
press the Function button to select the
"Up and Down Swing" function option
and then press the Enter/Cancel
button to deactivate it.

Up and Down Swing function setting is
as shown in Fig.10.

Unit On, no
up-down swing

UP / DOWN SWING FUNCTION cont.

Press “Enter/
Cancel” button to
activate up-down
swing function

Press “Function”
button to set up­down swing
function

Press “Enter/
Cancel” button to
cancel up-down
swing function

Press “Function”
button to set up­down swing
function

SDHVD1S Series Inverter Unit10