Sedus match, yeah! Instructions For Use Manual

G Adjusting the basic armrests (optional)

® Height:

1. Press the button underneath the armrest, lif t or lower the

armrest

2. Release the button, the armrest locks into place

® Adjust able seat width:

1. Loosen the screws slightly with a Torx

key (TX40)

2. Position the armrests 3. Retighten the screws

H Adjusting the 3D armrests (optional)

® Height:

1. Press the button, lift or lower the armrest 2. Release the

button to engage the armrest

® Depth: Push the armres t cover backwards or forwards to engage
® Swivelling armrest covers:up to 15°inwards and outwards; alsoswivels

360°with moreforce; a 180°turn changes the widthbetween the armrests

® Adjust able seat width:

1. Loosen the screws slightly with a Torx

key (TX40)

2. Position the armrests 3. Retighten the screws

A Height of the seat

® Lower ing the seat:

1

.

Sit down on the seat 2.Pull the lever upwards

(the seat will drop slowly)

3. Releasing the lever at the desired height

will lock the position

® Raising the seat :

1. Stand up 2. Pull the lever upwards (the seat will

rise slowly)

3. Releasing the lever at the desired height will lock the

position

C Angle of the backrest

® Adjusting the backrest dynamically:

1. Pull the lever upwards and

release it

2

.

Lean against the backrest 3.The backrest is free-flowing

® Locking the backres t into position:

1. Lean back until the backrest

reaches the desired angle

2. Press the lever down and release it to

lock the backrest into position

B Height ofthe lumbar support (optional)

® Adjusting the height:

1. Do not lean against the backrest

2

.

Adjust the handles on both sides to the desired height

D Strength of the backrest pressure

®

1

.

Adjusting the backrest dynamically (C) 2.Exert only slight pressure

on the seat and backrest

3. Crank the quick adjustment mechanism

downwards until the desired position is achie ved (greater backrest
pressure) or upwards (lesser backrest pressure)

E Depth of the seat (optional)

®

1. Press the finger plate and hold it fast 2. Push the cushion to the

desired position

3. Release the finger plate, and the seat will engage

F Seat angle (optional)

®

1. Stand up 2. Swivel the lever backwards and lock into place (chair tilts

4° forwards) or swivel downwards and lock into place (seat movesback
into its original position)

Congratulations! You have chosen a high-quality Sedus product. We hope you enjoy
your match off ice swivel chair.

Please read the following information on adjusting the chair properly so that you can
enjoy all the ergonomic advantages match has to offer.

match

Instructions for use

A

C

BB

E

D

F

H

G

The functions of the swivel chair

Correct use

This office swivel chair is designed for auser weight of up to 110 kg and may only
be used for the purpose intended while exercising due care andattention. Using it
inappropriately (e.g. as a stepladder, sitting on the armrests orplacing extreme
weight on one side) could result in accidents.

Castors

Please remove the red or blue transport protection before using the product for the
first time. Dif ferent castors are available, for the sake of your safety and for use on
different types of floor ing in accordance with safety regulations: Hard castors for
soft floors (standard). Soft castors for hard flo ors are optional. Changing castors:
this might be necessary, for instance, af ter moving office, or after the installation
of a new floor surface – simply pull out the castors and push new ones in.

Armrests

Armrests can be fitted later or exchanged on some models.

Plastic parts

Soapy water is suitable for cleaning. Please do not use any aggressive cleaning
materials.

Upholstery

In the case of light soiling to the upholstery, please only use suitable mild detergents
or Sedus cleaning agents. The upholstery should only be changed by skilled persons.

Leather

Leather is a natural product, whose markings give the material its unmist akable
character. Rub off light soiling with a soft woollen cloth. Heavier soiling should only
be treated with cleaners designed for aniline-dyed leather. Do not expose semi-aniline
leather to direct sunshine.

Servicing

Servicing work, such as exchanging or working on the gas-lif ts, may only be carried
out by trained personnel.

® Use the whole seat area

The anatomically shaped seat should be fully occupied. Only
then is proper contact with the supporting backrest assured.
match is also available with an adjustable seat tilt and a sliding
seat. These allow the seat to be adjusted to suit any body size.

® Adjust the height of the seat precisely

The correct seat height means that your elbow joint adopts an
angle of about 90° when your forearms are resting horizontally
on the desktop. Your knee joint will also adopt an angle of
about 90° when your feet are flat on the floor. If your desktop
is too high, and cannot be lowered to a correct position, you
need a footrest with adjustable height and tilt.

® Adjust the backrest

Adjust the height of the lumbar support so that the curv ature
of the backrest supports the spine in the region of the third
and fourth lumbar vert ebrae (where the forward curvature is
greatest). This stabilises the natur al S-shape of the spine in
every sitting position.

® Dynamic sitting

Dynamic sittingmeans changing your sittingposture frequently,
or in other words shifting as often as possible betwee n the
front and rear sitting posture. You should therefore adjust the
backrest dynamically. match isf itted with a“Similar”mechanism,
which allows you to adjust the pressure of the backrest individ­ually. This ensures that the backrest and seat automatically
give your body support in every sitting/lying positi on.

Healthy sitting is a question of attitude

02.2012

User notes

Deutschland: Sedus Stoll Aktiengesellschaft, Brückenstr aße 15, D-79761 Waldshut
Telefon [phone], Telefax (07751) 84- 310, [e-mail], www.sedus.de

Belgien: B-9230 Wetteren, Telefon [phone], www.sedus.be

Frankreich: F-75009 Paris, Telefon [phone], www.sedus.fr

Großbritannien: London EC1V 4DU, Telefon [phone], www.sedus.co.uk

Italien: I-22071 Cadorago (CO), Telefon 031.494.111, www.sedus.it

Niederlande: NL-2718 SZ Zoetermeer, Telefon [phone], www.sedus.nl

Österreich: A-5301 Eugendorf, Telefon [phone], www.sedus.at

Schweiz: CH-4613 Rickenbach, Telefon [phone], www.sedus.ch

Spanien: E-28830 San Fernando de Henares, Telefon [phone], www.sedus.es

Sedus contact addresses