SEDO DF9400 Users Manual

DVR SYSTEM

User’s Manual

Manual Revision : Version 5.3 above
Release Date : July 1. 2004

1

INDEX

Chapter Ⅰ. Main Screen

Ⅰ-1. Explanation of Main Screen

Ⅰ-2. Pan/Tilt Control

Chapter Ⅱ. Server Set Up

Ⅱ-1. Standard Set Up

A ~ N Functions per button

O Pan/Tilt control

(1) Preset
(2) Group
(3) Menu

a Camera name display
b See the voice wave
c Voice function
d Camera auto switching
e Auto system reset function
f Password Setup
g Time Setup
h Printer Setup

i Managing disk
j Compression

k Set Cannel

l Windows Logon

m Power Mode

n On Screen Keyboard

Ⅱ-2. Recording Type

a Camera Number
b Display (Hidden Camera Function)
c Position (Camera Position name,OSD)
d Event (Set Event)
e Frame (Adjust Frame Rate)

2

INDEX

f Pre (Pre-Alarm)
g Post (Post-Alarm)
h Sensor Type (Choose Sensor Type)

i Time
j Alarm Control

k Auto Camera Search

l Set Alarm Event

m Event Setup

n Record Motion/Sensor Event

Ⅱ-3. Schedule Setup

a Channel
b Schedule area
c Buttons

Ⅱ-4. Motion Setup

a Channel
b Motion area
c Sensitivity
d Show Motion Area
e Beep for Motion
f To the maximum quality Motion/Sensor
g Delete

Ⅱ-5.Color Setup

a Channel
b Color area
c Color control scroll bar
d Setup User’s Default
e Cancel User’s Default

3

INDEX

f All Default color
g Default Color

Ⅱ-6.Pan/Tilt Setup

a Channel
b User Edit
c Master Controller
d Type
e Setup Communication

Ⅱ-7.Control User Access

a Connection
b Check IP
c Port
d Transmission Speed and Image quality
e Insert ID and password
f Connected Client List
g Web Server
h Voice communication

i Live update
j Emergency Call
k IP server

Chapter Ⅲ. Back Up

Ⅲ-1.Backup format

a Channel No.
b Backup Disk
c Time list of recording data
d Backup
e Make AVI
f Burning CD
g Nero Burning Rom

4

INDEX

h Explorer

i Property
j Send E-Mail

Ⅲ-2.Backup format

a Channel
b Schedule
c Apply all channel
d Save time
e Backup time

Ⅲ-3.Backup format

a Select Camera
b Backed up data list(time table)
c Play to confirm back up image
d Slide bar to play
e Play/Stop button

Chapter Ⅳ. Server Search

Ⅳ-1.Search Screen

a Search screen
b Exit ( Go to ‘display’ mode. )
c Event
d Zoom in/out
e Backup/Print/Live
f Search the recorded data with below buttons
g Time
h Calendar
i Function (Smart search,Bookmark,AVI,Panorama,Speed-delay)
j Time Table

5

INDEX

Chapter Ⅴ. Server Voice

Ⅴ-1.How to record Voice

2.Confirm Voice Recording

Chapter Ⅵ. Client Connection

Ⅵ-1. Connection

A.Edit Site
B.Select connected Server
C.Set Camera
D.User Name

Ⅵ-2. Client main screen

A.Client connection setup box
B.Audio
C.Site-edit

D.Event-viewer

Sys-info
Save

Message (Sending a message)

History

Chapter Ⅶ. Web Client

Ⅶ-1. Connection

2. Web Client Main

3. Web Client Search

6

1. Install S/W

1

2

3

Start Server setup

Check Video type

If you use “Audio master 16ch” please check
“Yes” then our S/W will be install Audio driver
automatically

4

7

5

6

NEW!!

NEW!!

After finish installation, you must be restart the
system.

When you want S/W up-grade or re-install, you
can preserve exist setting of S/W.

7

NEW!!

NEW!!

DF-2400 Only
When you install DF-2400, If you use 2boards in

same system you can select no of boards.

8

Chapter 1.

Main Screen

9

EXPLANATION OF MAIN SCREEN

A

B

C

H E

F

L

G

J D

K N

M

O

I

A. Camera Number/recording state

( : Camera No./ : Normal Record/ : Motion Record/ : Sensor Record/

: Pre event Record/ : Post event Record/ : Voice record)

B. Display present images

When you click mouse right button on images, the whole images will be enlarged on screen.
When you click mouse left button on any image, the selected image will be enlarged.

C. Updated function : When program starts, updated f unctions will be shown.
D. History : It will show the list of historical log on system operation.
E. Power : When you click the Power button, DVR system will be shut down

. Auto switching

FF.

(Rotation) : Displays switching images by 1/4/6/7/8/9/10/13Ch.

in sequence with selected time interval.

G.Select camera No.
H. Select screen division among 1/4/6/7/8/9/10/13/16Ch.

Channel buttons will be changed up to your system configuration.
(4ch mode, 8ch mode, 16ch mode)

▣ 4ch mode : 1/4 ch screen division is only available.
▣ 8ch mode : 1/4/6/7/8 ch screen division is only available.

10

EXPLANATION OF MAIN SCREEN

I . Time : Display current time

J . Sending a message : If you click button, the following window will be shown.

Type your message

Client List

Type your message and click ‘Send’ button, the following window will sho w. Here you
can register user’s name.(Next time don’t ask user’s name.)

Also, You can register user’s name in ‘Control User Access/SETUP’. If you enter user’s
name, then DVR server will send a message to client.

K. Preview

: Display present recording images.

11

EXPLANATION OF MAIN SCREEN

L. : System Information

a

b

c

d

e

a. System Configuration : OS, S/W machine, Network connection state, S/W Version, VGA

model name, Capture Board Model name, HDD space calculation, Memory, etc.

b. HDD Space Information
c. Disk Info : Present HDD usage display. If you have one or more drives, then scroll down the

drive to letter required and can get the other HDD information.

d. HDD Space Calculation : If you click “Calculation” button, DVR calculates total recording

time and display the result in “System Information”. To calculate the other HDD types, Scroll
down and choose. Click “Calculation” button.

e. Update Info : The list of S/W updated information will be displayed.
f. Calculate frame rate : Click this button to load frame size calculation program. After selecting

camera, click “Start Compress data” button. It will automatically calculate frame size
according to codecs and resolutions. When calculation is finished, you can click “Print” or

“See the screen” button to see the result.

f

M. : Button for activating ‘SETUP’ Mode.

N . : Button for activating ‘SEARCH’ Mode.

12

EXPLANATION OF MAIN SCREEN

☞ You can change color value in main screen mode. If you click mouse left button over

1 second on your desired channel to adjust color setting, then dialogue box will open.
You can adjust color setting for each video input.

Move󰼿the󰼿bar󰼿to󰼿change󰼿color

To󰼿close󰼿this󰼿control󰼿box󰼿

To󰼿recover󰼿default󰼿setting󰼿colors󰼿

13

EXPLANATION OF MAIN SCREEN

☞ You can change division images to other positions. Just drag a image and drop to the

desired position.

This feature of position moving is available in PD-900, 1000, 1500, 2400,

and 3000 model.

14

PAN/TILT CONTROL

O

PAN/TILT CONTROL

CLICK!

☞ You can change PTZ settings in main screen mode.

1. Select the specified channel for PTZ setting and click PAN/TILT button.

2. Click PTZ control tab on bottom of screen

3. In dialogue box, you can choose PTZ driver, Unit No, COM port, and Baud Rate, etc.
Also you can change the PTZ settings in SETUP mode.

15

PAN/TILT CONTROL

b

CLICK!

O

a

c

d

O. PAN/TILT control : Clicking this button, you can drive Pan, Tilt and Zoom device. This

control can be used by PAN/TILT setting in Setup

☞ Note : In order to make correct working for P/T/Z, you need to assign correct driver for

specific device.

a. In order to activate executed P/T/Z Control, click “PAN-TILT” button,

and then select channel to control. Go back to main mode and once more click.

b. Speed control : Control moving speed

☞ Note : Some PTZ don’t display this speed control if they don’t support this control.

c. Preset / Group / Menu ( Refer the next page)
d. Zoom : Zoom In / Out.
e. Focus : Control Focus.
f. Change position with direction keys

e

f

16

PAN/TILT CONTROL

e

Preset / Group / Menu

(1) Preset : Setup Preset.

☞ Note : Some PTZ doesn’t activate if system

doesn’t support this feature, please
refer PTZ manual or contact your
supplier for more details.

1

2

1. Camera No. : Camera ID to control.

2. Protocol : Selected protocol in Setup

mode will be displayed.

3. Preset List : Display the list you want
to change and save.

3

4. Go to Preset : Select a preset No from the

list and click this button then
PTZ will act.

(Tested preset must be saved before.)

4

5. Preset ID : Insert the name for preset

6. Save ID : Click this button to add on

5
6

7

8

9

☞ Move to a desired position.

7. Set Preset : To save the preset when

8. Delete Preset : Delete undesired preset

the preset list.
(for example “?Test” display)

finished to move to a
desired preset position.
(for example “Test” display)

from the preset list.

9. Set Event Preset

: Preset setting for the event.

A

B

C

Step by step, select desired
position by using scroll list .

And set delay time .
The last, select desired position

to go back to scroll list .

☞ Note : If the system power off and restart while PTZ Auto Group is performing,

PTZ Auto Group Function will be performed automatically after restarting the system.

A

B

C

17

PAN/TILT CONTROL

(2) Group : Setup Preset Group.

☞ Note : Some PTZ doesn’t activate

if system doesn’t support this feature,
please refer PTZ manual or contact
your supplier for more details.

How to use Auto Group

A

1 2 3

B

4

5 6

1. Select Group No.

2. Type Group Name

on .

A

3

3. Click to add Group List

4. Select Preset No.

1

2

4

You can test preset by

Click .

5. Select Moving time to next
position.

6. Enter Dwell time for the
position.

7

7. Add the preset.
To add more preset, Repeat
No.4~7

8. Repeat No. ①~⑦ to add more
groups.

9. Select a desired group on

A

and click to run
a Group.

10. Click to stop
a Group.

☞ Note : If the system power off and restart while PTZ Master Controller is in use,

PTZ Master Controller will be in use after restarting the system.

18

PAN/TILT CONTROL

(3) Menu : Setup OSD menu.

This is used to control auxiliary camera functions.

1

Click “OSD Menu on button”

1

Main display will show camera OSD menu.
The menu is selected by direction arrows

and .

Moved by direction arrows and .

If you want to stop the menu then click

button.

(☞ Note : Don’t change ID in this OSD mode. You will

lose control.)

19

Chapter 2.

Server Set Up

20

STANDARD SETUP

M

go to “SETUP” mode

(1) STANDARD : after system installation, setup as user’s requires.

a
c
d

e

f

b

g

i

J

k

l

m

h

n

a. Camera Name : Check it for displaying camera title on screen.

b. See the voice wave : You can check the audio signal input state.
c. Voice : Check it for recording audio. You can select two types of input, mic and line.

If your Windows OS can not sound, this button is not activated.

(☞ Note : To communicate with client and server, don’t check this.)

d. Camera Auto Switching

• Switching time : To set the dwell time for sequential switching display on main and analogue
monitor.Switching time will be available to both equally.

• Event Spot Monitor : If check this option, when event is happened, analogue monitor show up
the event channel.
(☞ Note : If you check this, you can not use analogue monitor switching.)

21