SEDO DF 5000, DF 4900 User Manual

DVR SYSTEM

User’s Manual

Manual Revision : Version 3.0

Release Date : Aug. 30, 2003

■ SERVER

■ CLIENT

1

INFORMATION TO THE USER (Part 15.105(b))

INFORMATION TO THE USER

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more of the following
measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

WARNING

(Part 15.21)

The manufacturer is not responsible for any Radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.”

INDEX

DVR User’s Manual

1. DVR Sever

1-1. Display Mode

Main screen

Pan/Tilt Control

1-2. Setup Mode

Standard Setup

Recoding Setup

Schedule setup

Motion Detection Setup

Color Setup

PAN/TILT Setup

Network Setup

Backup Setup

1-3. Search Mode

Search screen

Data Back up

Search Data & Time

Print

2. Client program

2

1. DVR SERVER

1-1. Display mode

3

DISPLAY Mode

A

B

J K

C

D

E

L M

F G

H

I

A . Camera Number/recording state

( : Camera No. / : Recording / : Motion / : Sensor )

B . Display present images

Select screen division among 1/4/6/7/8/9/10/13/16Ch.

CC. . Select screen division

D. Auto switching (Rotation) : Displays switching images by 1Ch./4Ch./8Ch. in sequence

with selected time interval.

E. Select camera No.

F . Go to ‘SETUP’ Mode.

G . Go to ‘SEARCH’ Mode.

H. Power

When you click the Power button, DVR system will be shut down.

When you want to go Window mode, Please go to Setup.

(But, Do not use this function except only unavoidable situation for the system.)

TIME

II. . TIME

: Display current time.

: Display current time.

4

감시 모드

J

1

2

3

4 5

3

1

Display information of System

For example, VGA card, OS, network
communication state etc.

2

Capacity of HDD

Calculate used HDD space of current setting.

Used HDD space is very changeable by setup of channel, recording
method, compressor, image size etc.

So, you can calculate used HDD space by this function.

Also, If you specified HDD space, you can calculate used HDD space.

4

UPDATE information – Information of adding function & bug fix, etc.

5

5

Printed calculated frame result by
each CODEC.

No data record

during compression test.

!

When you click the Power button, DVR system will be shut down.

When you want to go Window mode, Please go to Setup.

6

K

Display present recording images.

This function is only our product’’

••This function is only our product

You can know present compressed recording image

You can know present compressed recording image

by CODEC.

by CODEC.

L

s special feature.

s special feature.

Real time chatting between SERVER
and CLIENT.

If you connect with several user, you
can choose just one user and then
send message to one user.

M

Record history of DVR SERVER.

You can know working history and
Connect history from outside

7

PAN/TILT Control

M

N

Click !

4

CONTROL moving speed and ZOOM/FOCUS

Operation speed of PANTILT camera.

But, camera has to include this function.

N. PAN/TILT control :

Click to active Pan/Tilt control panel.

4

N

1

Change direction with direction keys

2

ZOOM : Zoom In / Out.

3

Focus : Control Focus.

Speed dome control ( Refer the next page)

2

Speed dome control

3

1

Some camera has no P/T, Z/F & preset function.

Please use, after check CAMERA MAKER about this function supporting.

!

8

DISPLAY Mode

4

Speed dome control

: Setup Preset of Speed Dome Camera.

1.

1

6

2

3

4

5

How to set Preset

7

How to set Preset

1. Select Preset No.

2. Insert Preset ID.

3. Click to save ID.

3

4. Select a desired place for preset by pan/tilt control panel.

5. Click to add the preset.

6. Click to perform preset.

7. Click to delete preset.

4

7

1

2

9

DISPLAY Mode

2.

4

1 2 3

9

8

5

6 7

Close this Box

Run a Group

Stop a Group

Delete a Group

Rename a Group

Delete a Preset

Insert a Preset between lists

Add a Preset

How to set a Group

1. Select Group No.

2. Insert Group Name

3. Click to add Group List on .

3 4

4. Select Preset No.
You can test preset by Click .

5. Select Moving time to next position.

6. Enter Dwell time for the position.

7. Repeat No.1~6 to add group.

8. Select a desired group on
and click to run a Group.

9. Click to stop a Group.

1

2

5

7

4

6

10

M

In case that more than one PTZ camera set up, when user clicks or operates keys of PANTILT,
some camera which are operated will be displayed on screen.

If click this part, window for PANTILT setting will be open.

This function is convenient for users to operate several PANTILT in one DVR system.

11

1. DVR SERVER

1-2. Setup mode

12

STANDARD SETUP

E

go to “SETUP” mode

1. STANDARD setup : after system installation, setup as user’s requires.

1 12

2

3

5

6 7

4

8

9

10

11

13

1. Camera name : Check it to display camera name on screen.

2. Voice : Check it for recording the voice

MIC -1CH : Check it for voice recording of channel no.1.

1) Connect to MIC IN.

2) Use after check box of Voice.

LINE : When use both communication between SERVER and CLIENT/

1) Connect to sound CARDLINE IN of SERVER SYSTEM

2) Use after check box of LINE

13

3. Camera auto switching : Select camera switching time (Default : 1sec)

4. Monitor out select : You can choose image of analog monitor among display images
(Only for DF900,1000,1500 ,2400 )

5. Auto system reset: Setup a time interval for rebooting and shutdown the system.

What is the watch Dog ?
When system is unstable while monitoring, it automatically
reboot the system.

14

STANDARD SETUP

6. Set password :

Enter new passwords for Setup/Search/View/Power Down mode.

-Setup : Program “Setup”

-Search : Program “Search”

-Viewer : Start DVR

-Power Down : Close DVR

First setup

1.Select password among Setup, Search, Viewer, Power Down.

2.Insert password

3.Confirm password

4.Click “Set Password” and then, check message.

Delete

1. Insert current password

2. Do not insert “New Password” and “ Confirm Password”

3. Click “Set Password”

4, Select delete message of pop up window.

15

7. Password setup

Control USER right for DVR using.

1 2

3

If you permit right of secondary and third administrator that you have to

1

setup primary administrator password.

2

Select desired contents for each manager.

After check, setup password.

3

Admin : all functions available

st

Manger and 2ndManger up for your desired function.

Set 1

16

8. Time setup :

Setup time of system.

9. Save disk :

Scandisk :

Check DISK in DOS MODE

Format : Format data

10. Companion : Select compression method

When decrease picture quality, the size of image decrease.

You can see more frames in Remote Access.

• Resolution : Information of current picture quality

11. Setup Channel : If user wants to extend more than 4ch that user selects desired
channel

(Only for model DF-1000, 1500, 2000)

17

STANDARD SETUP

1-3. STANDARD Setup

11. Add Printer : Add printer as user’s require.

1

☞ Click ! Next ☞Select a manufacturer and model

3 4

☞ Select Printer Port and click Next. ☞Enter Printer name and click Next.

5

2

of the printer.

☞ After printing test, click Finish.

12. Power Mode : Select desired power mode when you shut off

DVR System by clicking Power button in Main mode.

Window : Go to Window Mode when you click Power button.

Power off : DVR system power off when you click Power button.

(Notice : DVR system is security product. So If user working in window mode,

you have a possibility get problem in your syste

m. )

18

저장방식 설정

Recording Type

2.

10

1 2 3

11

17

1. Camera Number

2. Connect : Hidden camera function.

‘None’ selected camera does not show images on the screen while recording

so that people can not notice it is recording.

5 6 7 8 9

4

15 16
12 1314

3. Camera name : Click the left button of mouse where you want and enter the camera

name as you want.

4. Event : You can set different recording type (sensor , motion, schedule, record, no
record ) by Mouse click.

When block selected, it can be changed by Right Mouse click.

19