PCI VIA IEEE 1394a 3+1 Ports Card
PCI VIA VT6306 IEEE 1394a 3+ 1
Ports Card
User Manual
User Manual Version 1.0
PCI VIA IEEE 1394a 3+1 Ports Card
Product Features :
- 32 bits CRC generator and checker for receive and transmit data
- On-chip 2K isochronous and 2K asynchronous receive and transmit
FIFOs
- 8 isochronous transmit / receive contexts
- 3-deep physical post-write queue
- 2-deep physical response queue
- Dual buffer mode enhancements
- Skip Processing enhancements
- Block Read Request handling
- Ack_tardy processing
- Compliant with 1394a Open HCI specification v. 1.0 and v. 1.1
- Descriptor based isochronous and asynchronous DMA channels for
receive / transmit packets
- Compliant with PCI specification v. 2.2
- High-performance bus mastering support
- Byte alignment to run in little-endian (x86/PCI) environment
- Compliant with PCI Bus Power Management specification v. 1.1
- Supports power states D0, D1, D2, D3hot, and D3cold
- Port1 and Port2 are shared port which support internal and external
applications
User Manual Version 1.0
PCI VIA IEEE 1394a 3+1 Ports Card
Driver Installations (Windows XP)
1. Power off the computer.
2. Install the PCI Card in a PCI slot.
3. Power on the computer and let the operating system detects the Card.
4. Normally, no drivers are needed for 1394a card. Follow the
operating system screen.
User Manual Version 1.0
PCI VIA IEEE 1394a 3+1 Ports Card
5. After installation completed, the system will be reset.
6. After Re-boot, “VIA OCHI Compliant IEEE 1394 Host Controller”
will be shown.
7. When a DV device is connected with 1394 port, Device Manager will
detect the device. A corresponding device driver and application
software will be needed to install for Video Capture.
8. Plesase follow the same installation step in Windows
98SE/ME/NT/2000.
User Manual Version 1.0
Loading...