Security Tronix ST-PTZMINI-IR10XTA Installation Manual
INSTALLATION MANUAL
ST-PTZMINI-IR10XTA
High Speed Intelligent IR Dome PTZ Color Camera
This is a 12 volt DC camera.
Copyright North American Cable Equipment
WARNINGS AND CAUTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT
INSERT ANY METALLIC OBJECTS THROUGH VENTILATION
GRILLS OR OPENINGS ON THE EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user the presence of
non-insulated “dangerous voltage” within the product’s
enclosure that maybe of sufficient magnitude to constitute a
risk of electric shock to different persons.
The exclamation point within an equilateral triangle, is
intended to alert the user the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying this product.
PRECAUTIONS:
Persons without technical qualifications should not attempt to operate this
dome device before reading this manual thoroughly.
Remove any power to the dome before attempting any operations or
adjustments inside the dome cover to avoid potential damage to the
mechanism.
Inside the dome cover there are precision optical and electrical devices.
Heavy pressure, shock and other sudden adjustments or operations should be
avoided. Otherwise, you may cause irreparable damage to the product.
Please DO NOT remove or disassemble any internal parts of the video
camera to
Avoid normal operation and possibly void the warranty. There are no
serviceable parts inside the camera.
All electrical connections to the dome should be made in strict accordance
with the attached labels and wiring instructions in this manual and in
accordance with all local and national electrical codes. Failure to do so may
damage the dome beyond repair and void the warranty.
For outdoor installation especially in high places or poles, it is highly
recommended that the proper lightning arrestors and surge suppressors are
installed before the dome is entered into service.
Do not use the product under circumstances where the environment exceeds
the maximum specified temperature, humidity or power supply
specifications.
IMPORTANT SAFEGUARDS
1. Read these instructions before attempting installation or operation of this dome.
2. Keep these instructions for future reference.
3. Heed all warnings and adhere to electrical specifications. Follow all instructions.
4. Clean only with non-abrasive dry cotton cloth, lint free and approved acrylic
cleaners.
5. Should the clear dome of the camera become dirty, use a special lens cleaning
cloth and solution to properly clean it.
6. Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
7. Use only attachments or accessories specified by the manufacturer.
8. Verify that the surface you are planning to use for attaching the dome can
adequately support the weight of the device and mounting hardware.
9. Protect this device against lighting storms with proper power supplies, surge
arrestors and other protective precautions.
10. Refer all servicing to SecurityTronix service personnel. Servicing is required
when the device has been damaged in any way, when liquid traces are present, or the
presence of loose objects is evident or if the device does not function properly, or
has received sever impact or has been dropped accidentally.
11. Do not use this product under circumstances exceeding specified temperature
and humidity ratings.
12. Avoid pointing the camera directly to the sun or other extremely bright objects
for prolonged period of time avoiding the risk of permanent damages to the imaging
sensor.
1
13. The attached instructions are for use by qualified personnel only. To reduce the
risks of electric shock, do not perform any servicing other than contained in the
operating instructions unless you are qualified to do so.
14. During usage, the user should abide by all electrical safety standards and adhere
to electrical specifications for the operation of the dome. The control cable for
RS485 communications as well as the video signal cables should be isolated from
high voltage equipment and high voltage cables.
1 Carton Contents
IR Speed dome 1pc
Wall mount bracket 1pc
Screws kit 1pc
User manual 1pc
Loading...