SecurityTronix ST-PBX18-10A-PTC User Manual

INSTALLATION MANUAL
ST-PBX18-10A-PTC
18-Port Power Distribution Box
CAUTIONS
1.
Input Voltage
100VAC ~ 240VAC, 60Hz or 50Hz
2.
Output Voltage
Regulated DC 12V to 15V @ 10A
3.
Main Fuse (PTC)
10A/250VAC PTC
4.
18 Individual Fuses (PTC)
1.1A/250VAC
5.
Input LED – Green Color
ON = Supply Normal, OFF = Power Failure
8.
Input Connector
IEC 3-pin AC cord
9.
Output Connectors
36 Screw Terminals (Pos & Neg x 18)
10.
Dimensions
8.25” (W) x 9.75 (T) x 3.5” (D)
11.
Weight
4.95 lbs
12.
Finish
Beige powder coat over steel chassis
CAUTION: To reduce the risk of electrical shock do not remove the power supply cover or of this unit. No user serviceable parts are inside.
SPECIAL ATTENTION
a) The installer must comply with electrical safety standards b) Do not connect or disconnect any cameras or other sources of current draw to this power
supply while power is live. Make all connections first, then connect this power supply to
the wall outlet and power-up the system. c) Only qualified installers are allowed to install and test the power distribution box. d) This unit is designed for INDOOR USE ONLY.
PACKAGE CONTENTS
This package contains:
One ST-PBX18-10A-PTC power supply.
One 3-pin grounded IEC AC power cord.
One installation manual.
One Accessories bag with 2 case keys and mounting hardware.
PRODUCT FEATURES
The ST-PBX18-10A-PTC is a professional grade power distribution box designed to meet the needs of the security industry. The unit provides a total of 12VDC at 10 amps to 18 distribution ports. It includes individual ‘power on’ status LED per channel, individual port protected PTC-type output fuses, individual port current protection and a digital switched-mode, regulated power supply for high efficiency and low temperature operation. Output voltage can be adjusted from 12VDC up to 15VDC to account for longer cable runs and higher-than-usual service voltages at the installation property.
SPECIFICATIONS
Specifications (Typical)
Troubleshooting assistance can be found online at www.securitytronix.com, email support at: support@securitytronix.com and from SecurityTronix Technical Support at (610) 429-1821 Press 3 for Tech Support, then 2 for CCTV Tech Support.
Loading...
+ 1 hidden pages