Security Tronix ST-D600DN2812-DSHB,ST-D600DN2812-HB Installation Manual

v1.0 1/19/11

1

INSTALLATION MANUAL

ST-D600DN2812-DSHB

Super WDR, 3D DNR True Day & Night

Dome Camera with Heater & Blower

v1.0 1/19/11

2

PACKAGE CONTENTS

This package contains:

One ST-D600DN2812-DSHB Super WDR dome color camera with heater and blower
One installation manual
Mounting hardware and mounting template
One side cap
Video and external OSD control cable
RS485 terminal block

Note: The ST-D600DN2812-DSHB requires a minimum 12VDC 150mA (no heater or blower)
power supply such as the ST-PS12VDC1A or ST-PS12VDC2A. The camera may also operate at
24VAC 360mA (heater and blower on).

PRODUCT DESCRIPTION

The ST-D600DN2812-HB is a professional grade, WDR (Wide Dynamic Range) day and night
color dome camera designed to provide clear images even under intense back light conditions.
The camera uses a 1/3” SONY Color Vertical Double Density CCD, provides 600TV lines of
resolution in color and 700TV lines in B&W. The ST-D600DN2812-DSHB has a 2.8mm – 12mm
lens for wide or narrow viewing. The 3 axis mount, built-in RS485 connection and on-screen
display make this camera very easy to set up. The day and night feature supports low light
illumination down to 0.0008Lux. An integrated heater and blower make this camera perfect for all
weather applications. This is a dual voltage camera that can be powered with either 12VDC or
24VAC, however, 24VAC must be applied to activate the heater function.

SPECIFICATIONS

ST-D600DN2812-DSHB

Specifications (Typical)

1. Image Sensor

1/3” SONY Color Vertical Double Density CCD

2. Scanning System

NTSC

3. Horizontal Resolution

600TV Lines Color, 700TV Lines B&W

4. Synchronization

Internal H/V 15.734/59.94Hz
Line Lock H/V 15.750/60Hz

5. Minimum Illumination

Sens-Up Off 0.12Lux (15IRE), 0.2Lux (30IRE),

0.4Lux (50IRE) F1.2
Sens-Up On 0.0002Lux (15IRE), 0.0005Lux (30IRE),

0.0008Lux (50IRE) F1.2

6. Scanning System

2 :1 interlace

7. Auto Electronic Shutter

1/60s~1/100,000s

8. Auto Gain Control

Automatic Low, Middle, High, Off

9. Lens

Aspherical 2.8 – 12mm DC Auto Iris ICR lens

10. S/N Ratio

>52dB (AGC off)

11. Privacy Masking

8 Windows (Polygonal, 8 Colors)

12. Day & Night

Color, B&W, Auto, Ext

13. Motion Detection

On/Off

14. Digital Zoom

X1.0 – x10

15. Gamma Correction

0.45

16. Video Output

1.0Vp-p/75Ω

17. WDR Level

120dB Max.

v1.0 1/19/11

3

18. Operating Temperature

-4F° - 140°F

19. Operating Humidity

30% - 80%

20. Power Supply

DC12V 150mA, AC24V 360mA (blower & heater on)

21. Dimensions

7”x4.5”

22. Weight

2.5 lbs.

INSTALLATION AND OPERATION

CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this

unit. No user serviceable parts are inside.

CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than

specified power source.

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.

Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for
assistance.

3. SPECIAL ATTENTION

a. The installer must comply with electrical safety standards. There must be sufficient

space between the camera’s power supply and video line and any high voltage
equipment and/or cables.

b. To help ensure the camera’s life and proper operation do not point the camera

towards the sun or strong light.

c. Do not install the camera in an environment where the temperature is above 140° F.

d. Do not install the camera near a magnetic field or a high-power motor.

e. Do not mount the camera near a radiator or heater.

f. Only use a dry cloth to clean the camera. If there is dirt that is difficult to remove wipe

gently with a mild detergent. Never use strong or abrasive detergents.

g. Using a power supply other than specified will damage the camera.

h. Only qualified installers are allowed to install, test and disassemble the camera.

i. The camera is a low voltage product. If installed outdoors proper safety and lightening

grounding are required.

This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.

This symbol is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.