Security Tronix ST-CCTV-VBAC Installation Manual

v2.0 10/26/10

1

INSTALLATION MANUAL©

ST-CCTV-VBAC

1 Channel UTP Active Video Balun

Transceiver

Copyright North American Cable Equipment, Inc.

v2.0 10/26/10

2

PACKAGE CONTENTS

This package contains:

One ST-CCTV-VBAC-TX Active Video Transmitter
One ST-CCTV-VBAC-RX Active Video Receiver
One installation manual

Note: A ST-PS12VDC1A 12V DC power supply is required for each ST-CCTV-VABAC-TX and
ST-CCTV-VBAC-RX and sold separately (i.e., 2 power supplies for the pair).

PRODUCT DESCRIPTION

The ST-CCTV-VBAC Active Video Balun Transceiver allows the transmission of real-time video
over Unshielded Twisted Pair (UTP) cable. The ST-CCTV-VBAC-TX video transmitter converts
an unbalanced video signal to a balanced signal transmitted over UTP. The ST-CCTV-VBAC-RX
video receiver then converts the balanced video signal to an unbalanced signal for display on the
device. These units offer excellent common mode and multi-channel interference rejection and the
transmission and display of high quality color video for security, surveillance, video conferencing,
video distribution and PTZ control signal applications.

SPECIFICATIONS

ST-CCTV-VBAC

Specifications (Typical)

1. Video Frequency Response

DC-8MHz

2. Video Common Mode and Differential
Mode Rejection

15KHz-6MHz 60dB typical

3. Wire Type

UPT
DC Loop Resistance ≤18Ω/100m
Differential Capacitance 62pF/m (max)

4. Interface

2 PIN UTP Terminal Block
BNC (female) Connector
DC Jack

5. Impedance

Twisted Pair: 100Ω
BNC Coax: 75Ω

6. Transmission Distance

1800 meters / 5,905 feet

7. Suppression

6KV 10uS*700uS IE61000-4-5

8. Power

DC 12-14V

9. Environmental

-4°-158° F, 0%-90% Humidity

10. Dimensions

3.2x.3.3x1.2 (with BNC)

11. Weight

4.6 oz