SecurityTronix ST-ALLIN1-TEST2 Specsheet

Key Features:

• Easily aim and focus your camera at the camera

• View IP, TVI, SDI, CVI, AHD & Analog cameras

• HDMI Input & HDMI output

• H.264 / H.265

• IP Camera discovery

• IP address scanning

• ONVIF 2.4 & RTSP compatible

• PoE and 12VDC 2A power outputs supply

 powerdirectlytocameras

• Built-in WiFi

• Built-in web browser

• CoC (Control over Coax)

• PTZ Control: pan, tilt & zoom, focus

 adjustment

• Supports Pelco D/P

• Video record and playback, camera image snapshot

• PTZ Data Monitor: Control protocol commands are

 displayedtocheckRS485transmission

• 8GB Micro SD card (included)

• Enhanced PAL/NTSC color bar generator

• Ping testing, port flashing

• PoE switch voltage testing

• Cat5 Continuity testing

• Cable search

• 2 Year limited warranty

®

7” Touchscreen Camera Installation &

Network Troubleshooting Tool, Supports

TVI, CVI, AHD, SDI, IP & Analog Video

With Integrated & Multi-Meter

IP BUDDY+ ALL IN 1

Description:

The 7 inch touch screen IP camera monitor and tester is designed for maintenance and installation of IP cameras, HD over Coax
cameras (TVI, CVI, SDI, AHD), and analog cameras as well as other security equipment. The 1280 x 800 resolution enables the
unit to display HD cameras and analog cameras in high resolution. The unit supports many HD over Coax PTZ, ONVIF PTZ and
analog PTZ controls.

The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, perform PING tests and IP address
scanning. You can use the blue cable tester to check the termination and cable type of network cables. Other functions include
providing 24W PoE power to your IP camera, an LED Flashlight, 12VDC 2A power output and much more. Its portability, user­friendly design and many other functions make the IP BUDDY+ ALL IN 1 an essential tool for all installers or technicians.

Contents Include:

• IP BUDDY+ ALL IN 1 video monitor and IP test meter

• 12VDC wall charger

• Lithium ion battery (Not plugged in during shipping.

 Pleasepluginpriortousingmeter!)

• 3 foot BNC test cable

• 18 inch RS485 test cable with alligator clips

• Cable tone probe

• 3 foot meter to camera power cable

• 18 inch 3.5mm audio cable with alligator clips

• Premium carrying case

• Carrying strap

• Lanyard

• User’s Manual

• 8GB SD card

• Green DC21 Male & Female power adaptors

• Multi meter test leads (red and black)

Ordering Information:

ST-ALLIN1-TEST2 Test Meter For Analog, TVI, CVI, AHD, SDI & IP With Integrated Video Monitor & Multi-Meter
ST-IP-TEST-BATTERY2 Replacement battery for ST-ALLIN1-TEST2
ST-IP-TEST-PS Replacement power supply for ST-ALLIN1-TEST2
ST-IP-TEST-SP2 Screen protector for ST-ALLIN1-TEST2

email: [e-mail] web: www.securitytronix.com

®

Full Feature List:

• 7 inch IPS touch screen,1280 x 800 resolution

• H.264 and H.265, 4K video display via mainstream

• Detect all network cameras and auto display with just one key

• Built-in WiFi to receive network images and data, create wifi hotspot

• Rapid ONVIF, auto log in and display images from the camera, and create test report

• Display ONVIF IP camera image, ONVIF PTZ controller, IP discovery

• Supports more than 80 customized IP camera protocols

• Supports IP camera apps and RTSP to view IP camera images

• Network bandwidth testing

• PoE 24W power supply to IP cameras

• HDMI signal output, supports 1080p

• DC12V 2A power output to camera

• USB 5V 2A power output to mobile phone

• LED Lamp, easy to operate at night

• Removable Micro SD card

• LCD screen with adjustable brightness / contrast / color saturation

• Automatically adapts and displays NTSC & PAL video formats

• Enhanced color bar generator

• FTP Server, Static IP address, DHCP, simultaneously test different segments IP cameras

• 8MP TVI test, 3840 x 2160, 15 FPS, 4x zoom, video record and playback, coaxial PTZ control and camera OSD menu

• 5MP AHD test, 2592 x 1944P, 12.5/20FPS, 4x zoom, video record and playback, coaxial PTZ control and camera OSD menu

• 8MP CVI test, 3840 x 2160, 12.5/15 FPS, 4x zoom, video record and playback, coaxial PTZ control and camera OSD menu

• HD-SDI / EX-SDI camera test, supports 1080P 50/60 FPS

• HDMI input, 720 x 480p / 720 x 576p / 1280 x 720p / 1920 x 1080p / 1024 x 768p / 1280 x 1024p / 1280 x 900p / 1440 x 900p

 displayimage,recordandsnapshot

• IP and analog camera testing at the same time, convert test from analog to digital via dual test window IP & CVBS

• CVBS loop test, the tester sends and receives color bar generator signals to test BNC cable

• Traffic monitoring of the tester LAN port, display network port or WiFi connection real-time upload & download speeds & other

 networkparameters

• Supports user self install apps, for example install android version apps, like skype, wechat, etc.

• Plays 4K video files and MKV / MP4 media files

• Edit documents in office apps (excel, word, ppt format)

• Screen lock, password lock and pattern lock

• Tester Play (screen projection): tester, android version mobile phone and PC display at the same time

• Shortcut button, drop-down menu, can select PoE power, IP setting, wlan switch, HDMI in functions etc in any interface

• Enhanced cable tester tests UTP cables, telephone cables as well as other cables order and connectivity, testing report can be saved

• Screen management, lite mode and normal mode, move the function’s icons, create new directories, theme and background setting

• 4x zoom, video image can be magnified to view details, easy to use (both for analog and IP video)

• Video record and playback (both for analog and IP video)

• Snapshot and save images as JPG files in the SD card (both for analog and IP video)

• Ping testing, test IP cameras or other network device ethernet ports

• IP address scan, quickly search for connected IP cameras and other network devices

• PoE voltage measurement, test PoE switch voltage to IP cameras, wireless AP devices and other PD devices

• Device Port flicker, easily find connected PoE switch ports, the connected PoE port will flicker for easy identification

• Link monitor, check the setting IP address for occupation

• PTZ address scan, search for the ID of a PTZ camera

• Network cable and Telephone cable testing, display the sequence of connections and the number of the LAN cable.

• RJ45 cable TDR test

• Supports RS485, rate 600 - 115200bps adjustable

• Multi-protocol, supports more than thirty PTZ protocols such as Pelco-P, Pelco-D, Samsung etc.

• PTZ protocol analysis, control protocol command displays to check RS485 transmission

• PTZ control, Pan/tilt the PTZ unit, zoom in/out, adjust the focus, aperture and set the preset position

• Audio input and output test, test the audio signal from pickup devices

• Digital Multimeter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing

• Cable tracer app with toner wand, sends a specific signal, easy to find an individual cable from cable bundles

• Lithium Ion Polymer Battery can last 10 hours under normal use after charging for 6 hours

7” Touchscreen Camera Installation &

Network Troubleshooting Tool, Supports

TVI, CVI, AHD, SDI, IP & Analog Video

With Integrated & Multi-Meter

IP BUDDY+ ALL IN 1

email: [e-mail] web: www.securitytronix.com

IP BUDDY+ ALL IN 1

Signal format

NTSC / PAL (Auto-Selecting)

Display

7 inch IPS touch screen, 1280 x 800 resolution

IP camera type

4K, H.264, H.265, ONVIF, ONVIF PTZ, ACTi etc.

Rapid Video

Auto view video, create test report

Network test

FTP Server, Static IP address, DHCP, simultaneously test different segments' IP cameras, Network bandwidth
testing, IP discovery

IP camera apps

Supports video management software to view IP camera images

RTSP

Supports RTSP to view IP camera images

LCD adjust

Adjustable brightness, contrast, color

HDMI input

1 channel HDMI input, supports 1080P

HDMI signal output

1 channel HDMI output, supports 1080P

Network port

10/100/1000M auto adjust, RJ45

Wifi

Built in Wifi, speeds 150M, receives wireless camera images, create wifi hotspot

PoE power output

PoE 24W power supply to IP cameras

Video Input / Output

1 channel BNC input & 1 channel BNC looped output

Video Output Mode

1.0 Vp-p

CVBS loop test

The tester sends and receives color bar generator signals to check BNC cables

Power Adapter

5V DC, 2A input supply

Power output

12V DC, 2A power output for cameras

Audio input

1 channel audio signal input to test pickup device, 1 channel audio signal output to connect headphones

USB power output

USB 5V 2A power output to mobile phone

Communication

RS485

Baud Rate

150, 300, 600, 1200, 2400, 4800, 9600, 19200bps

Power Saving Features

Sleep mode, Battery level indicator

PTZ Address Scanning

Scan for local PTZ address over data cables

Rechargeable Battery

6 hour charge, works for 10 hours

Battery

1 pcs Lithium Ion Polymer Battery; 7.4V DC, 5000mAh

Video Display

Displays video signal from analog input

Video Signal

Color bar generator for monitor testing

Cable Test

Checks connections of UTP cables, RJ45 cable TDR test

PTZ Protocol

Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, TeleEye etc.

PTZ data Capture

Reads and displays commands sent from controllers

Image 4x zoom

4x zoom image display and video out

Photograph

Snapshot and save the image as JPG file and screenshot

Video record

Video recording and playback from the SD card

Port Finder

Find a connected PoE port quickly

IP scan

Find a connected IP camera or network equipment´s IP address

Link monitor

Check to see if an IP address is being used

Ping testing

Network and Ip camera ping test

PoE tester

PoE voltage testing, PoE port flicker, PoE link monitoring

Night Led

Built in LED lamp

SD card

With 8G Micro SD card, supports Micro SD card for recording, max supported 32G SD card

Tester Play

Screen projection: tester, mobile phone and PC display at the same time (For android version mobile phone)

Drop-down menu

User can select PoE power switch, IP setting, WLAN switch, HDMI In functions etc in any interface

HD-TVI input

8MP TVI camera test, 3840 x 2160, 15 FPS, image display, zoom, video record and playback, coaxial PTZ control
and camera OSD menu

HD-CVI input

8MP CVI camera test, 3840 x 2160, 12.5/15 FPS, image display, zoom, video record and playback, coaxial PTZ
control and camera OSD menu

AHD input

5MP AHD test, 2592 x 1944P, 12.5/20FPS, image display, zoom, video record and playback, coaxial PTZ control
and camera OSD menu

HD SDI/EX-SDI input

HD-SDI / EX-SDI camera test, supports 1080P 50/60 FPS

Multimeter

Voltage, current, resistance and capacitance can be tested, continuity testing, diode testing

Cable tracer app with toner wand

Find an individual connected cable from a cable bundle. Connect one end of the cable to tester and the tester will
send specific signals, which will enable the blue cable tracker to find the other end of the connected cable quickly
and easily by making a clear sound.

Dimension

Tester: 9.45" x 6.22" x 1.74" (240mm x 158mm x 44mm); Color box: 12.6" x 11.42" x 3.86" (320mm x 290mm x
98mm)

Weight

Tester: 2.25 lbs. (1,020g); Tester with accessories & packaging: 6.11 lbs. (2,770g)

®

7” Touchscreen Camera Installation &

Network Troubleshooting Tool, Supports

TVI, CVI, AHD, SDI, IP & Analog Video

With Integrated & Multi-Meter

email: [e-mail] web: www.securitytronix.com