Securitytronix HD-CoaxinatorTVI ST-HDC2VFB-MZ Quick Start Manual

ST-HDC2VFB-MZ

QUICK START GUIDE

www.nacebrands.com www.securitytronix.com

010000120116

User Manual

Thank you for pur

chasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer or technical support.

This manual applies to the Securitytronix HD-TVI Series

cameras.

This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the newest version of this manual. We will readily
improve or update the products or procedures
described in the manual.

For additional information, or if you have any issues
with this product, please visit

www.securitytronix.com

Or contact technical support @ 347-817-4342

Privacy Notice

Surveillance laws vary by jurisdiction. Check all relevant
laws in your jurisdiction before using this product for
surveillance purposes.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and

found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.

FCC Conditions

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,
including interference that may cause undesired
operation

EU Conformity Statement

This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the

applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.

2006/66/EC (battery directive): This

product contains a battery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentation for specific battery

information. The battery is marked with
this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a
designated collection point. For more information see:
www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.

1 Introduction

1.2 Overview

 The cables vary according to different models. The cables of

each type are shown in the figures below, please refer to
the actual camera in use.

 You can debug the camera by connecting an auxiliary HD TVI

cable to the auxiliary video output.

1.2.1 Overview of Type I Camera

Photoconductive
Resistance

Model I Cables

Video Cable

24VAC/12VDC
Power Cord

Video Cable

12V DC

Power Cord

Model II Cables

Main Body

Lens

Bracket

Cables

Auxiliary Video
Output

Menu Button

Figure 1-1 Overview of Type I Camera

1.2.2 Overview of Type II Camera

Camera

Lock Screw

Enclosure

Video Cable

12V DC
Power Cord

Base Plate

Figure 1-2 Overview of Type II Camera

1.1

Product Features

This series of HD-TVI camera

adopts high
performance sensors and advanced circuit board
design technology. It features high resolution, low
distortion, and low noise, etc. Designed for use in
surveillance systems.

The main features are as follows:

 High performance CMOS sensor to produce an

exceptional quality image;

 Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux

with IR;

 IR cut filter with auto switch;
 OSD menu, parameters are configurable;
 Auto white balance and internal synchronization;
 SMART IR mode;
 True WDR;
 Advanced 3-axis design meets different installation

requirements