Security Tronix HD-COAXINATORTVI ST-HDC2PTZ, HD-COAXINATORTVI ST-HDC2PTZFM Quick Start Manual

ST-HDC2PTZ

QUICK START GUIDE

www.ŶĂĐĞďƌĂŶĚƐ.com www.securitytronix.com

ST-HDC2PTZ·Quick Start Guide

ii

Quick Start Guide

About this Manual

This Manual is applicable to HD-COAXINATORTVI Speed Dome Cameras.

This Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in this Manual is subject to change, without notice, due to firmware updates or other
reasons. Please use this user manual under the guidance of professionals.

03261060707

ST-HDC2PTZ·Quick Start Guide

iii

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits for a digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause
undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the

RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

ST-HDC2PTZ·Quick Start Guide

iv

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the cautions are neglected.

Warnings

 All electronic operation should be in strict compliance with the electrical safety regulations, fire

prevention regulations and other related regulations in your local region.

 Please use the power adapter, which is provided with the camera. The standard of the power

adapter is 24VAC10% or 12VDC10% (depending on models). The power consumption cannot
be less than the required value.

 Do not connect several devices to one power adapter as adapter overload may cause over-heat

or fire hazard.

 Please make sure that the power has been disconnected before you wire, install or dismantle the

speed dome.

 When the product is installed on wall or ceiling, the device shall be firmly fixed.
 If smoke, odors or noise rise from the device, turn off the power at once and unplug the power

cable, and contact support for further assistance.

 If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the speed dome yourself. (We shall not assume any responsibility
for problems caused by unauthorized repair or maintenance.)

Cautions

 Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetic radiation. Avoid installing the equipment on surfaces subject to shock or
vibration (failure to do so can cause equipment damage).

 Do not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire or

electrical shock may occur. The operating temperature should be -22°F ~ 149°F(outdoor speed
dome) and -14°F ~ 122°F (indoor speed dome).

 The indoor dome cover should be protected from rain and moisture.
 Exposing the equipment to direct sun light, low ventilation or a heat source such as heater or

radiator should be avoided (failure to do so could cause a fire hazzard).

Warnings Follow
these safeguards to
prevent serious injury
or death.

Cautions Follow these
precautions to prevent
potential injury or material
damage.

ST-HDC2PTZ·Quick Start Guide

v

 Do not aim the speed dome at the sun or extremely bright scenes. A blooming or smear may

occur (which is not a malfunction), and affecting the longevity of sensor at the same time.

 Please use the provided glove when opening up the dome cover, avoid direct contact with the

dome cover, because the acidic sweat of the fingers may erode the surface coating of the dome
cover.

 Please use a soft and dry cloth when cleaning inside and outside surfaces of the dome cover, do

not use alkaline detergents.

 Please keep all wrappers after unpacking them for future use. In case of any failure, you will need

to return the speed dome to the factory with original packaging to prevent to damage to the
camera while in transit.

 For further assistance, or if you encounter any issue while using this product, please contact your

distributor or Securitytronix at: 800-688-9282 Press 3 for support, then 2 for CCTV.

ST-HDC2PTZ·Quick Start Guide

vi

Table of Contents

1 Installation ........................................................................................................ 1

1.1 Connecting the Cables .............................................................................................................. 1

1.2 DIP Switch Settings ................................................................................................................... 2

1.2.1 5-inch Speed Dome Settings .............................................................................................. 2

1.2.2 5-inch IR & Mini IR Speed Dome Settings .......................................................................... 4

1.2.3 7-inch IR Speed Dome Settings .......................................................................................... 7

1.2.4 Mini Speed Dome Settings ................................................................................................ 9

1.3 Wiring and Installation ........................................................................................................... 11

1.3.1 Wiring .............................................................................................................................. 11

1.3.2 Installing the Bracket ....................................................................................................... 12

1.3.3 Setting the DIP Switch ..................................................................................................... 13

1.3.4 Installing the Speed Dome ............................................................................................... 13

2 In-door Mounting Applications....................................................................... 14

2.1 5-inch Speed Dome In-ceiling Mounting Applications ............................................................ 14

2.2 5-inch Speed Dome Ceiling Mounting Applications ................................................................ 16

2.2.1 Removing the Mounting Bracket ..................................................................................... 16

2.2.2 Wiring .............................................................................................................................. 17

2.2.3 Ceiling Mounting ............................................................................................................. 18

2.3 Mini Speed Dome In-ceiling Mounting Applications ............................................................... 20

2.4 Mini Speed Dome Ceiling Mounting Applications .................................................................. 22

2.4.1 Wiring .............................................................................................................................. 22

2.4.2 Ceiling Mounting ............................................................................................................. 22

3 Application and Operations ............................................................................ 24

3.1 System Application ................................................................................................................. 24

3.2 Basic Operations ..................................................................................................................... 24

3.2.1 Configuring Patrol ............................................................................................................ 25

3.2.2 Configuring Park Actions ................................................................................................. 28

4 Troubleshooting .............................................................................................. 30

4.1 Device Exceptions ................................................................................................................... 30

4.2 PTZ Control Exceptions ........................................................................................................... 30

4.3 Other Questions ..................................................................................................................... 30

ST-HDC2PTZ·Quick Start Guide

1

1 Installation

Before you start:

Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.

There are several ways to install the HDC-TVI speed dome. The wall mounting is taken as an
example below.

1.1 Connecting the Cables

Please turn the power off before connecting the cables.

The cable interfaces of speed dome are shown in following figure. The cables are distinguished by
different colors. The labels attached on the cables are for identification.

The cables may vary according to different camera models. Please refer to the actual device.

R

E

D

A

C

2

4

V

Y

E

L

L

O

W

/

G

R

E

E

N

B

L

A

C

K

A

C

2

4

V

Y

E

L

L

O

W

R

4

8

5

-

O

R

A

N

G

E

R

4

8

5

+

VI EOD

Alarm

HD-TVI Video Output

Power Supply

VI EOD

CVBS Video Output

RS485

Figure 1-1 Cables

Table 1-1 Cables Description

Name

Description

Power Supply

24V AC/ 12V DC

HDC-TVI Video Output

HDC-TVI and coaxial video output

CVBS Video Output

SD analog video output

RS485

RS 485 control

Alarm

Alarm input and alarm output

ST-HDC2PTZ·Quick Start Guide

2

1.2 DIP Switch Settings

1.2.1 5-inch Speed Dome Settings

The DIP switch is used for setting the address and baudrate for the speed dome, with value ON=1
and OFF=0.

The SW1 switches from the first to the eighth are used to set the address. The SW2 switches are
used to set the baudrate.

The default dome address is 0. The default baudrate is 2400.

1 2 3 4 5 6 7 8

1

2

DIP Switch

Figure 1-2 DIP Switch Settings for 5-inch Outdoor Speed Dome

1 2 3 4 5 6 7
8

1 2

DIP Switch

Figure 1-3 DIP Switch Settings for 5-inch Indoor Speed Dome

Figure 1-4 Enlarged View of DIP Switch

 Address Settings

The SW1 switches from 1 to 5 are used for setting the address of speed dome. You can refer to
Table 1-2 for details of setting the speed dome address to a specific number.

ST-HDC2PTZ·Quick Start Guide

3

Table 1-2 Set the Dome Address

Switch No.

Dome Address

1 2 3 4 5

0

OFF

OFF

OFF

OFF

OFF

1

ON

OFF

OFF

OFF

OFF

2

OFF

ON

OFF

OFF

OFF

3

ON

ON

OFF

OFF

OFF

…

… … … … …

31

ON

ON

ON

ON

ON

 Protocol Settings

The number 6 and 7 of SW1 switches are for setting the protocol of the speed dome. You can refer
to Table 1-3 for details of setting the speed dome protocol.

Table 1-3 Set the Protocol of the Dome

Switch No.

Protocol

6

7

Self-adaptive

OFF

OFF

PELCO_D

ON

OFF

MAN_BOSCH

OFF

ON

MAN_AD

ON

ON

 TVI Mode Settings

The number 8 of SW1 switches is for setting the TVI mode of the speed dome. You can refer to
Table 1-4 for details of TVI mode settings.

Table 1-4 Set the TVI Mode

Switch No.

TVI Mode

8

V2.0

OFF

V1.0

ON

 Baudrate Settings

The number 1 and 2 SW2 switches are used for setting the baudrate of the speed dome. The
baudrate can be 2400bps, 4800bps, 9600bps and 19200bps. The baudrate will be set as 2400bps by
default if it is out of this range. Refer to the following table:

ST-HDC2PTZ·Quick Start Guide

4

Table 1-5 Set the Baudrate of the Dome

Switch No.

Baudrate

1

2

2400

OFF

OFF

4800

ON

OFF

9600

OFF

ON

19200

ON

ON

1.2.2 5-inch IR & Mini IR Speed Dome Settings

The DIP switch is for setting the speed dome address, baudrate, protocol, etc., with value ON=1 and
OFF=0. The switch label of the 5-inch IR speed dome is on the back of the SWITCH cover as shown
in Figure 1-5. The DIP switch of mini IR speed dome is shown in Figure 1-6.

DIP Switch

Screws

Switch Cover

Figure 1-5 Position of DIP Switch for 5-inch IR Speed Dome

 DIP Switch Location of Mini IR Speed Dome

Screws

DIP Switch

Figure 1-6 DIP Switch of Mini IR Speed Dome

 Setting DIP Switch

ST-HDC2PTZ·Quick Start Guide

5

1 75 6432 8 9 10

ON DIP

1 2

ON

Figure 1-7 Enlarged View of DIP Switch

 For some certain models, the two individual DIP switches at the left side of the Figure 1-7 are

supported for turning on/off the terminator; while other models are not supported.

 The default dome address is 0; the default baudrate is 2400; and the default value of the 120Ω

terminator is OFF.

Table 1-6 Switch Functions

Switch

Function

1 to 5

Set the address for the speed dome

6, 7

Set the baudrate for the speed dome

8

Set the protocol for the speed dome

9

Set the TVI mode for the speed dome

10

Set the terminal resistor for the speed dome

The DIP switch is designed according to binary system. When the switch is ON, it stands for the
number 1. When the switch is OFF, it stands for the number 0.

Example:

The switches from No. 1 to 5 are used to set the speed dome address. No. 1 is the lowest digit and
No. 5 is the highest. Turning on all these 5 switches stands for the binary number 11111. Converting
the 11111 to a decimal number is 31. So the speed dome address will be 31.

 Address List

For convenient settings, refer to the following list to set the address for the speed domes.

Table 1-7 Dome Address

Switch No.

Dome Address

1 2 3 4 5

0

OFF

OFF

OFF

OFF

OFF 1 ON

OFF

OFF

OFF

OFF 2 OFF

ON

OFF

OFF

OFF

3

ON

ON

OFF

OFF

OFF … … … … … …

31

ON

ON

ON

ON

ON

ST-HDC2PTZ·Quick Start Guide

6

 Baudrate List

For convenient settings, refer to the following list to set the baudrate for the speed dome. The
baudrate will be set as 2400bps by default.

Table 1-8 Baudrate

Switch

Baudrate

6

7

2400

OFF

OFF

4800

ON

OFF

9600

OFF

ON

19200

ON

ON

 Protocol List

For convenient settings, refer to the following list to set the protocol for the speed dome.

Table 1-9 Protocol

Protocol

8

Self-adaptive

OFF

MAN_AD

ON

 TVI Mode

Table 1-10 TVI Mode

TVI Mode

9

V2.0

OFF

V1.0

ON

The speed dome is self-adaptive to private protocol when the No.8 and 9 switches are both
OFF.

 Terminal Resistor

Table 1-11 Terminal Resistor

Terminal Matching Resistance

10

Turn on the Resistor

ON

Turn off the Resistor

OFF