Page 1
SM-209DT
Add-on indoor 2.4GHz digital wireless mini
camera with audio (DigiminiAir camera)
Antenna
Lens
Microphone
Mounting Bracket
Power
Jack
Pairing Button
Installation
Please reference the DigiminiAir/DigioutAir user ’s manual on how to
pair the camera to the SM-451DR digital receiver and then give it a
quick test for video transmission before camera installation.
Camera Installation (SM-209DT)
1. Mounting the camera:
a) Detach the cameras mounting bracket by removing the
two screws located on the left and right side of the
camera using a Philip screw driver.
b) Secure the camera’s mounting bracket in the desired location
using the wall mount bracket and screws provide as shown
on below.
Note: Please see DigiminAir manual for detailed instructions.
Product Contents
• 1 x SM-209DT camera with antenna
• 1 x Camera mounting bracket and screws
• 1 x Power adapter
• 1 x User’s manual
Features
• Mini size camera design
• Wireless transmission up to 200ft between walls and
up to 350ft in clear line of sight
• No Wi-Fi interference; no interference from crowded
analog 900MHz/2.4GHz/5.8GHz/6.0GHz devices
• Built-in microphone for audible recording up to 20ft away
• Digital wireless pairing channel (Ch1/Ch2/Ch3/Ch4) camera
and receiver, worry-free of signal interception
• Compatible with DigiminiAir/DigioutAir SM-451DR receiver only
Specifications
Image Sensor
Resolution
View Angle
Audio
Minimum Illumination
Pairing Button
Power Supply
Dimensions (LxWxH)
Frequency
Transmission power
Receiver Sensitivity
Modulation
Antenn a
Transmission Distance
Operating Temperature
Operating Humidity
1/4” CMOS C olor
510 x 49 2 pixels ( NTSC)
60 deg ree
Microp hone b uilt-in (up to 20 ft)
3 Lux/F 1. 2
1
DC 5V / 1.5A
1.45 ” x 1.45 ” x0.8 ”
ISM 240 0 – 2480 M Hz (CH1/CH2/CH3/CH4)
17 dBm
≤ -85dBm
GFSK
Omni 3dBi
Up to 350 f t clea r line of sight;
up to 200ft (indoor)
-20°C to 60°C (-4°F to 140° F)
20% -80% RH
c) Re-attach the camera to the mounting bracket and adjust
the viewing angle as needed (adjust by tilting up and down)
as illustrated on the right.
2. Connect the power adapter plug into the power socket attached to
the camera and then connect the power adapter (5VDC, 1.5A) into
an electrical power outlet as shown below.
Page 2
© Copyri ght 201 2
This manual is furnished under lice nse an d may be used or copied onl y in accordance w ith
the term s of such license.
Except a s permi tted by su ch license, no p art of this pub licati on may be re produced,
stored i n a retrieval syste m, or tra nsmit ted, in any form o r any mea ns, el ectro nic,
mecha nica l, reco rding , or othe rwise , including translation to an other l anguage or fo rmat,
withou t the prior written permissio n of SecurityMan.
The content of thi s manual is fur nishe d for inf ormati onal u se only, is subjec t to chan ge
withou t notice , and should not be cons trued a s a commi tment by S ecurityMa n.
Secur ityMan Inc as sume s no resp onsib ility o r liability for any errors or ina ccura cies that
may appear in this book .
FCC Information
This dev ice complies with part 15 of the FC C Rules . Operation is subje ct to the fo llowin g
two conditions:
(1) Th is device shoul d not cau se harmful interfe rence .
(2) This device must a ccept any in terfe rence re ceived , including in terfe rence th at
may cause unde sired o peration.
Operation of this equ ipment in a resi dential area is l ikely to cause interfe rence in
which c ase, th e user at h is or her own risk a nd expense will b e requi red to cor rect th e
interference.
Warranty
Secur ityMan warra nts that this prod uct wil l be free from defects in titl e, materials and
manuf actu ring wor kmanship for one year fro m the date of th e purchase or otherwis e
specified on th e packa ge. If th e product is foun d to be defective the n, as your sole rem edy
and as the m anufactur er’s only oblig ation , Secur ityMan will rep air or rep lace the product.
This warranty is excl usive and is limited to this produc t. This wa rrant y shall not apply to
produ cts that have been sub jecte d to abuse, misuse , abnor mal ele ctric al or enviro nmen tal
condit ions, or any condit ion othe r than what can be consi dered normal us e.
Warranty Disclaimers
Secur ityMan Inc , makes n o other wa rranties, express , impli ed or oth erwi se, reg ardin g
this pro duct , and sp ecifi cally d isclaims any warrant y for merchant ability or fit ness fo r a
particular purpose.
The exclu sion of implie d warra nties is n ot perm itted i n some st ates an d the exclu sions
specified herein may not app ly to you. This warr anty p rovides you with sp ecifi c legal
rights. The re may be oth er righ ts that yo u have which vary f rom state to state .
Limitation of Liability
The liability of Se curit yMan I nc, ar ising f rom this warranty and sale sha ll be lim ited
to a refun d of the pu rchase p rice. I n no event s hall Securit yMan b e liable for cos ts
of procu rement of subs titute products or service s, or for any lost p rofits , or for a ny
conse quential, in cidental, d irect o r indirect da mage s, howeve r caused and on any
theor y of liability, arising f rom this warranty and s ale. T hese li mitations sha ll apply not
withst andin g any failure of es sential purp ose of any limited remedy.
For Tech Support Call: 888-977-3777
SecurityMan
4601 E . Airport Drive, Ontario, C A, 91761, USA
Tel: 909-23 0- 6668 Fax: 909 -230 -6889
Email: info@securitymaninc .com
Website: www.securitymaninc.com
Copyrig ht 2012 by S ecurityMan v1.0
Operating Restrictions
When using this product, the safety precautions below must be taken
to avoid possible legal liabilities and damages.
PLEASE NOTE that under certain circumstances, audio/video recording
may be PROHIBITED by law. This device should be used only in
compliance with all applicable federal, state and local statutes.
• DO NOT place this product too close to medical equipments. Radio
waves might potentially cause breakdown of electrical medical
equipment. This product should be placed at least one foot away from
any heart pacemaker. Radio waves might potentially inuence heart
pacemaker and lead to respiratory disturbance.
• DO NOT use this product to violate one’s privacy. Monitoring one’s
private activities without consent is illegal and this product is not
designed and manufactured for these purposes.
• DO NOT this product to carry out any illegal activities such as sneak
preview, and etc. SecurityMan shall not be responsible for any
consequences of illegal conducts made by users.
• DO NOT put the plastic package bags in reach of children or babies.
Young children can choke on these items if they put them into their mouths.
• DO NOT plug the AC adapter into the outlet in improper situations.
• Plugging in an AC adapter with wet hands might cause electric shock.
• Plugging in the AC adapter unsteadily might cause re or electric shock.
• DO NOT cover the AC adapter when it is connected to an outlet, place
the adapter near heaters, or put it on the oor which is equipped with
a heater. The above mentioned operation might cause re or incidents.
• DO NOT use it aboard; please abide by the airway’s provision. It might
inuence communication aboard and the ying apparatus if departing
from the airway’s regulation. This will result in accident, possible death
and severe physical hurt.
• DO NOT disassemble or repair the camera, receiver or other relevant
peripheral equipments by yourself. Improper disassembly might cause
damage to the product internal parts, the peripheral equipment, or
personal injury.
• DO NOT put the camera in quaky paces. The camera may be unstable
or out of operation if installed improperly. Such installation may also
cause breakdown.
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing
the antenna might inuence the receiving of electromagnetic wave,
and thereby inuence the receiving effect.
• DO NOT use the camera in complex environment, the obstruction of
stumbling block will affect the electromagnetic wave and inuence
the receiving range. Wall, tree and other stumbling block might absorb,
reect the electromagnetic wave, and inuence the receiving range.
• DO NOT use the camera in the places which are covered with
metal.The around metal, such as elevator and cabin, might shield the
electromagnetic wave, and result in inability to receive signals.
• DO NOT use the camera near aggressive chemicals.
• DO NOT place the product near any strong magnetic objects
• DO NOT disassemble the product.
• DO NOT shake or strike the product.
• DO NOT attempt to service the product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualied service personnel.
Conditions
Please read the following messages to make sure your working
environment is suitable.
• The temperature should be kept between –20˚C and 60˚C (-4˚F to
140˚F). The relative humidity should be kept between 20% and 80%.
• Avoid putting the product in places where temperature or humidity
may change rapidly in temperature or humidity.
• Keep it dry, dustless and avoid exposure directly in sunlight.
• Keep product away from heat sources such as electric heater.
• It might inuence the normal operation of the product if used at the
fringe range of normal temperature. Please turn off the power when
not in use.
• Please obey the local government ’s environment protection policy.
• In order to avoid inammation or electric shock, this camera kit should
be kept away from exposure to rain or moist, and it shall not be put in
or near bathrooms, washing polls, wash houses, moist basements, or
swimming pools, unless it is well shielded.
• In use of sockets set on walls or extension wires, attention should
be paid not to exceed their load capabilities to avoid inammation or
electric shock.
• Switch off the power supply in thunder and lightning weather or when
not in use for long periods of time.
Safety Instructions
• Please read these instructions before using the product. This product
is neither waterproof nor dust proof; therefore it cannot be used
outdoors or in adverse environment.
• Please adopt original DC power supply, to avoid causing device
damage or electric shock or fire.
• Unauthorized dismantlement of the device or replacement of device
parts is forbidden. The manufacturer will not be responsible for any
loss arising from such actions.
• Do not put the device into fire, oven or microwave oven, in order to
avoid explosion.
• As a result of version changes, the user manual may be different from
Loading...