Page 1
DIGILCDNDVRB Quick Start Guide (iPhone)
The SecurityMan DIGILCDNDVRB is designed for quick and easy installation.
This guide will help you get your system connected to your mobile device in 2
easy steps.
Step 1 HARDWARE
Insert Included
8GB SD C ard
(supports up to 32GB)
Connect the Power
Adapter
Power Button
Extend the Antenna
Connect the Ethernet
Cable to your Router
Attach the Antenna
Connect the Power
Step 2 INSTALL APP & SCAN QR CODE
1. Open the App Store on your mobile device. Then search for and install the “WatchBot ” application developed by “ Long Xu”. Once installed, tap on the
“Wat chB ot” icon (Fig. 2.1), select “+” to add a new device (Fig. 2. 2) and then select the “Scan” option (Fig. 2.3).
Fig2.3Fig2.1 Fig2.2
1
Page 2
2. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name
(Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6).
NOTE: The default password is 222222.
Fig2.4
3. When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7 ). Now select your device (Fig. 2.8) to bring up the live view screen
(Fig. 2.9).
NOTE: When accessing your system for the first time, the app will prompt you for permission to use your phones microphone. Please tap “OK” if you
would like to hear audio from your camera when available.
Fig2.5 Fig2.6
Fig2.7 Fig2.8
Fig2.9
2
Page 3
DIGILCDNDVRB Quick Start Guide (Android)
The SecurityMan DIGILCDNDVRB is designed for quick and easy installation.
This guide will help you get your system connected to your mobile device in 2
easy steps.
Step 1 HARDWARE
Insert Included
8GB SD C ard
(supports up to 32GB)
Connect the Power
Adapter
Power Button
Extend the Antenna
Connect the Ethernet
Cable to your Router
Attach the Antenna
Connect the Power
Step 2 INSTALL APP & SCAN QR CODE
1. Open the Play Store on your mobile device. Then search for and install the “WatchB ot” application developed “Eric Xu”. Once installed, tap on the
“Wat chB ot” icon (Fig. 2.1), select “+” to add a new device (Fig. 2. 2) and then select the “QR Scan” option (Fig . 2.3).
Fig2.1 Fig2.2
Fig2.3
1
Page 4
2. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name
(Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6).
NOTE: The default password is 222222.
Fig2.4
3. When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7 ). Now select your device (Fig. 2.8) to bring up the live view screen
(Fig. 2.9).
Fig2.5 Fig2.6
Fig2.7 Fig2.8
Fig2.9
2
Loading...