SecurityMan
BoxCam-I
Auto lris color CCD Camera kit
w/Night Vision
2
Copyright Notice
This manual is furnished under license and may be used or copied
only in accordance with the terms of such license. Except as
permitted by such license, no part of this publication may be
reproduced, stored in a retrieval system, or transmitted, in any form
or any means, electronic, mechanical. Recording, or otherwise,
including translation to another language or format, without the
prior written permission of SecurityMan. The content of this manual
is furnished for informational use only, is subject to change
without notice, and should not be construed as a commitment by
SecurityMan. SecurityMan assumes no responsibility or liability for
any errors or inaccuracies that may appear in this book. All other
product names, trademarks and registered trademarks in this
document are the properties of their respective holders.
FCC Information
Notes on FCC’s “Consistent Statement of Information” This product
meet the requirements specified in Part 15 of FCC Regulation.
Operation rests with the following two conditions:
(1) The equipment should not cause any harmful interference.
(2) The equipment must receive and process any interference,
Including any possible interference caused by operation
Mistakes.
Warranty
SecurityMan warrants this product will be free from defects in
materials and workmanship for period of time specified on the
product packaging. This limited warranty shall commence from the
3
date of purchase. SecurityMan Products warranty is not transferable
and is limited to the original purchaser. If the product is found to be
defective then, as your sole remedy and as the manufacturer ’s only
obligation,SecurityMan will repair or replace the product. This
warranty shall not apply to products that have been subjected to
abuse, misuse, abnormal electrical or environmental conditions,
normal wear and tear or any condition other than what can be
considered normal use.
Limitation of Liability
The liability of SecurityMan arising from this warranty and sale shall
be limited to a refund of the purchase price. In no event shall
SecurityMan be liable for costs of procurement of substitute
products or services, or for any lost profits, or for any consequential,
incidental, direct or indirect damages, however caused and on any
theory of liability, arising from this warranty and sale. These
limitations shall apply not with standing any failure of essential
purpose of any limited remedy
SecurityMan
4601E.Airport Drive, Ontario,CA91761, USA
Tel: 888-977-3777 or 909-230-6668
Email: info@securitymaninc.com
Fax: 909-230-6889
Website: http://www.securitymaninc.com
Copyright 2007 by SecurityMan v1.1
For Customer Service： 888-977-3777
4
Contents
5
SM－308 Camera Features 5
Package List 6
Diagram 6
Product Basics 7
Installation 8
Caution 9
Specification 10
Warning 11
Troubleshooting 12
Package Contents
EU Environmental Protection 12
Package Contents
User's Manual
• SM－308 box camera day/night with 4mm auto iris lens
• Wall－mount metal bracket
• 12 VDC power adapter (UL)
• 60ft VP cable
•
SM－308 Camera Features
• clear indoor color camera with 1/3” SHARP CCD sensor
(better than ¼ and CMOS sensor).
• 4mm auto iris lens provides clear picture quality when the camera
is shooting toward window or door areas where light often changes.
• Built-in 14 infrared leds for night vision(B/W)
• Convenient all-in-one D. I . Y.(do-it-yourself) kit.
Crystal
5
Security Man
BoxC am-1
Auto lris color CCD Camera kit
w/Nigh y Visi on
Package List
Diagram
Camera adapter BoxCam-I
BoxCam-I Output to TV or Recorder
6
4mm camera w/ mounting bracket 60ft BNC Cable
12VDC adapter for camera User’s Manual
BNC Output
And/Or
Product Basics
IR
1／3＂Color
CCD 4mm Lens
Metal mounting
bracket
BoxCam－l
7
Electric aperture-Use EE if Al is producing
(default setting)
too much lights
Automatic Iris
Video Driver -This is a DC driver camera,
do not use this setting
Direct Currency Driver (default setting)
Light Level-Do not use metal tip material
to adjust the light level, to adjust please
use plastic material
BNC Video Output
For Auto Iris Lens
Power Light Indicator
Power DC Input
EE:
AI:
VIDEO:
DC:
LEVEL:
VIDEO OUT:
PL:
12V DC IN:
1~4 (Auto Iris):
BoxCam-I
EE AI
VID EO
LEV EL
DC
VI DEO OUT
4 2
3
1
PL
12V DC I N
－
＋
8
Installation
1. the camera to a desired , mount it with provided
screws and then adjust for a suitable angle.
2. Connect the power adapter to the camera and power outlet.
3.Connect the VIDEO OUT to a recorder or monitor/
cable．
Note: if recorder or monitor/TV has RCA connector type, an additional
female BNC to male RCA adapter may require.
Position location the
TV with "BNC"
9
Caution:
1) Please keep the lens, IR lights, and sensor window clear to
prevent IR sensor from malfunctioning.
2) Avoid projection angles where there are bright background
lighting.
3) Operate by using the included AC adapter with 12VDC 500mA,
positive inside.
4) Use under condition where the temperature is below 122
degree Fahrenheit.
5) Do not use strong or abrasive detergent when cleaning the
camera.
10
Specification
Image Pick-up Device
Effective Picture Elements
Horizontal Resolution
S／N Ratio
Auto Electronic Shutter
Back Light Compensation
Gain Control
White Balance
Gamma Correction
Lens Furnished
Viewing Angle
Synchronous System
Video Output
Power Supply
Operating Temp.
IR LED
IR Night Vision Range
Camera Dimensions
Weight （Net／Gross)
SHARP 1／3＂ Color CCD
NTSC：512X492，PAL：512X582（option）
0 Lux with IR on (night time);
0.8Lux with IR off
More than 48 dB
NTSC：1／50s~1/100,000s
PAL: 1/60s~1/110,000s
Automatically
Automatcally
Auto tracking(2500K~9500K)
R>0.45
4mm auto iris lens/CS F1.4 (detachable)
Internal
1 Vp-p Composite Video/75 Ohms.
12V DC／300mA(AC 110v~220v),UL
14 Units of 850nm IR LED
30~35ft
120（L）X55（w）X48(h)mm (4.7”x2.2”x1.9”)
394g（camera itself with lens)/2.75Ibs
o
65
420 horizontal TV lines
Minimum IIIumination
SM－308 －I Camera
o o o o
-20 C to 50 C (-4 F to 122 F)
Warning
11
Please be careful the symbol of the presence of
“Dangerous Voltage”. It may be result in the electronic
shock.
To prevent the risk and electronic shock, instal away
from moisture and rain. Refer to the instruction for
proper maintenance.
Warning
In order to reduce the electric shock
danger,the layman please machine
top plate or top plate.
12
Troubleshooting
＊
＊
＊
＊
The picture is normal
in the day time but
foggy at night time
or the horizontal line
across the screen.
1
2
The voltage is not enough
or the power supply cable
is too long.
Problem Reasons Solution
Change the power
supply or mount
the camera to a
different
location.
Test if the video
cable does not
have any short
circuit
.
Use a voltage
meter to check
if the power
output is 12V 500mA
Check the power
adapter to be
connected to the
power outlet wall
outlet or
with a
cable tester
The video cable may have
a short
The AC power adapter is not
providing enough power
The AC power is not
connected.
EU Environmental Protection
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer
for recycling advice.
No Picture
Loading...