Security-Center TV7000, TV7004, TV7001, TV7005, TV7002 Installation Manual

Video surveillance camera

Installation Guide

TV7007

TV7006

TV7005

TV7004

TV7003

TV7002

TV7001

TV7000

1

1. Preface

Dear Customer,

Thank you for purchasing this ECOLINE digital
video surveillance camera. You made the right
decision in choosing this state-of-the-art
technology. This product complies with the
current standards of national and European
regulations. The CE has been proven and all
related certifications are available from the
manufacturer upon request.

To maintain this status and to guarantee safe
operation, it is your obligation to observe these
operating instructions!

The ECOLINE series of digital cameras
introduces a new level of high picture quality and
high resolution through the use of a 1/3” SONY
Super HAD interline transfer CCD image sensor.
The all state circuitry provides extremely long life
and a high level of reliability. The cameras use
class A microelements that are resistant to
external electromagnetic fields. They offer
cutting-edge technology for advanced video
surveillance.

2. Scope of delivery

ECOLINE camera (model as described)
C-mount adapter ring
Auto-iris lens connector
Operating instructions

3. Features

All cameras of the ECOLINE series have the
following functions:
a) Auto electronic shutter (AES)
b) Backlight compensation (BLC)
c) Auto gain control (AGC)
d) Connector for auto-iris lenses

Additional for colour cameras:
e) Auto white balance (AWB)
f) Digital signal processing (DSP)

4. Precautions

To reduce the risk of electric shock, do not
remove cover (or back) – there are no user
serviceable parts inside. Refer servicing to
qualified service personnel.

2

Do not expose the camera to rain or
moisture, or try to operate in wet areas.

The camera is designed to be operated indoors
only. If the camera becomes wet, turn the power
off immediately and ask a qualified service
technical to check it before turning the power on
again. Moisture can damage the camera and
also create the danger of electric shock.

Clean the CCD faceplate with care. Do not
clean the CCD with strong or abrasive detergents
or touch it with your fingers. Use lens tissue or a
cotton tipped applicator and ethanol.

Never point the camera towards the
sun. Whether the camera is in use or not, never

aim the CCD at the sun or other very bright
objects (laser light). This can damage the CCD
element and create white dots on the monitor, a
sign that CCD pixels are destroyed.

Operate the camera only within the
specified temperature, power source
and humidity ratings. Using the camera

beyond the specified ranges can reduce the
service of the camera or lead to malfunction.
Greatly exceeding the ratings can cause a
sudden and lasting malfunction of the camera.
All operating ranges can be found in the
technical data. Observe the correct camera
model.

Handle the camera with care. Do not
abuse the camera. Avoid striking, shaking, etc.
Mount the camera in a shake-free area. The
camera could be damaged by improper
handling, storage or transport.

5. Installation instructions

If you wish to use the camera for outdoor
surveillance, ensure that it is installed in an
outdoor housing. The housing needs to be
equipped with a heater. It should also protect the
camera from direct sunlight and moisture.
Unstable ambient light conditions especially can
be handled more professionally with auto-iris
lenses than with manual or fixed lenses.

3