Securitron AQU244-8C8R Specsheet

AQU244-8C8R

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Fuse protected against surge for AC input and DC output

• Auto-sensing variable speed smart fan

• Power module has ON/OFF switch to disconnect DC output fro m power

• Eight (8) channel power distribution with Access Control and fire relays

o Channels individually configurable to enable/disable with fire trigger
o Heavy duty relay per output with status LED, or group outputs by jumper
o Individual input for each output
o Power-limited, PTC-protected outputs, each with a green status LED indicator
o Main power LED indicates input power status
o Trigger LED indicates Fire Relay status
o Pluggable terminal b locks by channel and func t io n

• SPDT Form C output for remote monitoring of trouble: AC failure, Low battery, or over
voltage

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL Listed

Power Supply

The AQU244-8C8R power supply with battery
charger/backup and supervision is a single voltage
power supply that uses any AC power source from
90-240VAC/47-63Hz to provide up to 4 Amps @ 24VDC
continuous output.

Electrical

Input Voltage Operating Range

Environment

SPECIFICATIONS: AQU244-8C8R

Regulatory

Power Module: AQU244

Access Control: -8C8R

Electrical

Mechanical

90-240VAC
47-63Hz

Maximum Output Voltage

120 VA
5 Amps @ 12VDC

Continuous Output Voltage

96 VA
4 Amps @ 12VDC

Voltage Range

9.8 – 13.67VDC/ 13.65 typical

Operating Fr e quency

23KHz

Max board power use: 208mA

Maximum Ou t p ut Per Channe l

8 channels @ 1.04A/channel 24V

Fuses

Output: PTC 1.04A/channel
Holds current at 130˚F

Relays

Input Relays: 20ma required for activations
Output Relays: contacts rated 7A 125VAC max

Contacts

EOL: +/-60% of 2.2K ohms

Onboard Power Output

One (1) Output with ON/OFF switch

Fuse Protection

Battery: PTC 4 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
Trouble notification: SPDT Form C 200mA
120VAC

Operating Temperature: -4 to +104˚F
[-20 to +40˚C]
Humidity: 95% RH non condensing

Dimensions

Enclosure: 14”x 14” x 4.75”
Power Board: 7.4” x 3.95” x 2.35”

Mounting: 3.5” x 6.8”
Access Control Module: 4.82” x 3.84” x 1.4”

Mounting: 3.41” x 4.50”

Shipping Weight: 12.5 lbs

RoHS lead free