Securitron AQU243-8F8R Specsheet

AQU243-8F8R

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Fuse protected against surge for AC input and DC output

• Class 2 power limited output

• Eight (8) channel power distribution with Access Co ntrol

o Fire transfer relays with individual inputs and status LEDs
o Each relay input activated from Low Current Open Collector, Normally Closed or

Normally Open switch

o Channels individually configured to FT Enabled/D isabled
o Power limited fuse protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Pluggable terminal b locks by channel and func t io n

• SPDT Form C output for remote monitoring of:

o AC failure
o Low battery

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL Listed

Power Supply

The AQU243-8F8R power supply with battery
charger/backup and supervision is a single voltage
power supply that uses any AC power source from
90-240VAC/47-63Hz to provide up to 3 Amps @
24VDC continuous output.

Electrical

Environment

SPECIFICATIONS: AQU243-8F8R

Regulatory

Power Module: AQU243

Access Control: -8F8R

Electrical

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

79.2 VA

3.3 Amps @ 24VDC

Continuous Output Voltage

72 VA
3 Amps @ 24VDC

Voltage Range

9.8 – 13.67VDC/ 13.65 typical

Operating Fr e quency

27KHz

Onboard Power Output

One (1) Output

Max board power use: 208mA

Maximum Ou t p ut Per Channe l

8 channels @ .5A/cha nnel

Fuses

Size: 050 Standard 3AGC
Output: .5A

Relays

Input Relays: 20ma required for activation
Output Relays: contacts rated 7A 125VAC max

Triggers

EOL: +/-60% of 2.2K ohms

Fuse Protection

Battery: 3 Amp
Current Overload: Fuse, self-resetting
Thermal Runaway: Fuse, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

UL 294

RoHS lead free

Operating Temperature: -4 to +104˚F
[-20 to +40˚C]
Humidity: 95% RH non condensing

Dimensions

Enclosure: 14”x 9” x 3.5”
Power Board: 6.4” x 3.95” x 2.35”

Mounting: 5.36” x 3.54”
Access Control Module: 4.82” x 3.84” x 1.4”

Mounting: 3.41” x 4.50”

Shipping Weight: 7.65 lbs