Securitron AQU243-8C1R Specsheet

AQU243-8C1R

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Fuse protected against surge for AC input and DC output

• Eight (8) channel power distribution with fire relay trigger

o Channels individually selectable to ON/OFF/Always ON in response to fire relay
o Power limited protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input powe r
o Latching or non-latching

• SPDT Form C output for remote monitoring of:

o AC failure
o Low battery

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

Power Supply

The AQU243-8C1R power supply with battery
charger/backup and supervision is a single voltage
power supply with a fire transfer relay that uses any
AC power source from 90-240VAC/47-63Hz to
provide up to 3 Amps @ 12VDC continuous output.

Electrical

Environment

SPECIFICATIONS: AQU243-8C1R

Regulatory

Power Module: AQU243

Distribution Board: -8C1R

Electrical

Transfer Relay: 15Amps max

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

79.2 VA

3.3 Amps @ 12VDC

Continuous Output Voltage

72 VA
3 Amps @ 12VDC

Voltage Range

9.8 – 13.67VDC/ 13.65 typical

Operating Fr e quency

27KHz

Onboard Power Output

One (1) Output

Fuse Protection

Battery: PTC 3 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

PTC Circuit breakers hold current at 130˚F

Maximum Ou t p ut Per Channe l

8 channels @ 1.23A/channel, Power Limited

Supervision

Trouble/Triggered Form C: 2A
Green LED per channel

Fuses

Output: PTC 1.23A/channel
Holds current at 130°F
Main Fuse/Power Pull: 20A ATO

Relay

Reverse Polarity Trigger:
Input: 30VDC max Voltage
Trigger: +/-20% input voltage

EOL Trigger:
Input: 2.2K ohms
Trigger: +/- 50% resistance on wire pair

Operating Temperature: -4 to +104˚F
[-20 to +40˚C]
Humidity: 95% RH non condensing

UL 294, UL 603, ULC S318-96

RoHS lead free

Dimensions

Enclosure: 14”x 9” x 3.5”
Power Module: 6.4” x 3.95” x 2.35”

Mounting: 5.36” x 3.54”
Fire Transfer Relay: 3.88” x 4.84” x .75”

Mounting: 3.41” x 4.50”
Shipping Weight: 7.65 lbs