Securitron AQU126-8F Specsheet

AQU126-8F

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Eight (8)channel power distribution

o Power limited fuse protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input powe r

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

o AC failure
o Low battery

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL Listed

Power Supply

The AQU126-8F power supply with battery
charger/backup and supervision is a single voltage
switching power supply that uses any AC power
source from 90-240VAC/47-63Hz to provide up to 6
Amps @ 12VDC continuous output.

SPECIFICATIONS: AQU126-8F

Power Module: AQU126

Distribution Board: -8F

Electrical

Input Voltage Operating Range

Electrical

Environment

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Regulatory

90-240VAC
47-63Hz

Maximum Output Voltage

78 VA

6.5 Amps @ 12VDC

Continuous Output Voltage

72 VA
6 Amps @ 12VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

Operating Fr e quency

27KHz

Output Terminal Block Rating

40A

Output Wire Gaug e Ra ng e

10-28AWG*

Maximum Ou t p ut Per Channe l

8 channels @ 2A/channel

Fuses

Size: 200 Standard 3AGC
Output: 2A
Main Fuse/Power Pull: 10A ATO

Onboard Power Output

One Output

Fuse Protection

Battery: PTC 6 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

Operating Temperature: -4 to +104˚F
[-20 to +40˚C]
Humidity: 95% RH non condensing

Dimensions

Enclosure: 14”x 9” x 3.5”
Power Board: 6.4”x 3.95” x 2.35”

Mounting: 5.36” x 3.54”
Distribution Board: 3.87” x 4.84” x 1”

Mounting: 3.41” x 4.49”
Shipping Weight: 8.10 lbs

UL 294

RoHS lead free