Securitron AQD5-8F8R Specsheet

AQD5-8F8R

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 5A/3A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Class 2 power limited output

• Eight (8) channel power distribution with access control

o Fire Transfer Relays
o Channels individually configured to FT Enabled/Disabled
o Power limited fuse protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input powe r
o Pluggable terminal block s by channel and function

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

o AC failure
o Low battery
o Trigger status

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

Power Supply

The AQD5-8F8R power supply with battery
charger/backup and supervision is a dual voltage
switching power supply with a fire transfer relay
that uses any AC power source from
90-240VAC/43-63Hz to provide up to 5 Amps
@ 12VDC or 3 Amps @ 24VDC total output.

SPECIFICATIO N S: AQD5-8F8R

Power Module: AQD5

Access Control Module: -8F8R

Electrical

Electrical

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Dimensions

Regulatory

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

72 VA
6 Amps @ 12VDC
3 Amps @ 24VDC

Continuous Output Voltage

60 VA
5 Amps @ 12VDC
3 Amps @ 24VDC

Voltage Range

9.8 – 13.8VDC/ 13.65 typical

19.6 – 28VDC/ 27.3 typical

Operating Fr e quency

132KHz

Onboard Power Output

One (1) Class 2 Power Limited

Universal 11-29VDC operation
Max board power use: 208mA

Output Wire Gaug e Ra ng e

14-22AWG*, 5mm spacing

Fuses

Size: 050 Standard 3AGC
Output: .5A

Relays

Input Relays: 20ma required for activation
Output Relays: contacts rated 7A 125VAC
max

Triggers

EOL: +/-60% of 2.2K ohms

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 6 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

UL 294
UL 603

ULC-S318-96

RoHS lead free

Enclosure: 14”x 9” x 3.5”
Power Board: 6.05”x 3.87” x .2.28”

Mounting: 4.5” x 3.41”
Module: 4.82” x 3.84” x 1.4”

Mounting: 3.4” x 4.5”
Shipping Weight: 7.65 lbs