Securitron AQD5-8F Specsheet

AQD5-8F

Amps @ 12VDC or 3 Amps @ 24VDC total output.

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 5A/3A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

• Class 2 power limited output

• Eight (8) channel power distribution

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

Power Supply

The AQD5-8F power supply with battery
charger/backup and supervision is a dual voltage
switching power supply that uses any AC power
source from 90-240VAC/43-63Hz to provide up to 5

o Overcurrent
o Thermal runaway
o Reverse battery hookup

o Power limited fuse protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input powe r

o AC failure
o Low battery

SPECIFICATIO N S: AQD5-8F

Power Module: AQD5

Distribution Board: -8F

Electrical

Electrical

Dimensions

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Regulatory

RoHS lead free

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

72 VA
6 Amps @ 12VDC
3 Amps @ 24VDC

Output Terminal Block Rating

40A

Output Wire Gaug e Ra ng e

10-28AWG*

Maximum Ou t p ut Per Channe l

8 channels @ 2A/channel

Continuous Output Voltage

60 VA
5 Amps @ 12VDC
3 Amps @ 24VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

19.6 – 28VDC/ 27.3 typical

Operating Fr e quency

132KHz

Onboard Power Output

One (1) Class 2 Power Limited

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 6 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

Fuses

Size: 050 Standard 3AGC
Output: 2A
Main Fuse/Power Pull: 5A ATO

Enclosure: 14”x 9” x 3.5”
Power Board: 3.73”x 4.84” x 2”

Mounting: 3.41” x 4.5”
Distribution Board: 3.87” x 4.84” x 1”

Mounting: 3.41” x 4.49”
Shipping Weight: 8.10 lbs

UL 294
UL 603

ULC-S318-96

CAN/ULC-S533-02