Securitron AQD5-4C Specsheet

AQD5-4C

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 5A/3A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Well regulated and conditioned power board protected by self-resetting circuit breakers

for common conditions including:

• Class 2 power limited output

• Four-channel power distribution

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL Listed

Power Supply

The AQD5-4C power supply with battery charger/backup
and supervision is a dual voltage switching power supply
that uses any AC power source from 90-240VAC to
provide up to 5 Amps @ 12VDC or 3 Amps @ 24VDC
total output.

o Overcurrent
o Thermal runaway
o Reverse battery hookup

o Power limited PTC protected outputs, each with a green LED status indicator
o ON/OFF power switch

o AC failure
o Low battery

Electrical

Electrical

SPECIFICATIONS: AQD5-4C

Power Module: AQD5

Dimensions

Regulatory

RoHS lead free

*Use gauge appropriate for output voltage and wiring distance.

Distribution Board: -4C

Mechanical

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

72 VA
6 Amps @ 12VDC
3 Amps @ 24VDC

Continuous Output Voltage

60 VA
5 Amps @ 12VDC
3 Amps @ 24VDC

Voltage Range

9.8 – 13.8VDC/ 13.65 typical

19.8 – 28VDC/ 27.3 typical

Operating Fr e quency

132KHz

Onboard Power Output

One (1) Class 2 Power Limited

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 6 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

PTC Circuit breakers hold current at 130˚F

Output Terminal Block Rating

10A

Output Wire Gauge Range

14-28AWG*

Maximum Ou t p ut Per Channe l

4 channels @ 1,4A/channel

Enclosure: 14”x 9” x 3.5”

Power Board: 3.73”x 4.84” x 2”
Mounting: 3.41” x 4.5”

Distribution Board: 3.75” x 2.22” x 1”

Mounting: 3.41” x 1.87”
Shipping Weight: 7.90 lbs

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

UL 294
UL 603

ULC-S318-96

CAN/ULC-S533-02