Securitron AQD5-1R Specsheet

AQD5-1R

FEATURES:

Power Supply

The AQD5-1R power supply with battery
charger/backup and supervision is a dual voltage
switching power supply with a fire transfer relay
that uses any AC power source from 90-240VAC
to provide up to 5 Amps @ 12VDC or 3 Amps @
24VDC total output.

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 5A/3A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Class 2 power limited output with LED status indicator

• Fire Transfer Relay

o Normally ON and Normally OFF output
o Power shifts from ON output to OFF output when triggered
o Latching or Non-latching mode
o LED trigger status indicators
o Multiple ways to trigger
o Provides ground fault detection

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

o AC failure
o Low battery
o Trigger status

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

Electrical

Electrical

SPECIFICATIONS: AQD5-1R

Power Module: AQD5

Dimensions

Shipping Weight: 7.87 lbs

Regulatory

Fire Transfer Relay: -1R

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

72 VA
6 Amps @ 12VDC
3 Amps @ 24VDC

Board power use with no load: 70mA
Output: 2 output terminal blocks

- 1 Normally ON

- 1 Normally OFF

Output Wire Gaug e

10-28AWG*

Continuous Output Voltage

60 VA
5 Amps @ 12VDC
3 Amps @ 24VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

19.6 – 28VDC/ 27.3 typical

Operating Fr e quency

132KHz

Onboard Power Output

One (1) Class 2 Power Limited

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 6 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

Supervision

Trouble/Triggered Form C: 3A
Trigger Status LED: 6mA

Relay

Input Trigger OVR: Normally Closed
14-28AWG
Input Trigger AUX-IN: Normally Closed
14-28AWG
EOL Trigger:
Input: 2.2K ohms
Trigger: +/- 60% resistance on wire pair
Reset Input: 14-28AWG

Transfer Relay: Rated 12Amps max

Enclosure: 14”x 9” x 3.5”

Power Board: 3.73”x 4.84” x 2”
Mounting: 3.41” x 4.5”

Fire Transfer Relay: 2.23” x 3.75” x .8”

Mounting: 1.89” x 3.41”

RoHS lead free