Securitron AQD3-8F8R Specsheet

AQD3-8F8R

FEATURES:

Power Supply

The AQD3-8F8R power supply with battery
charger/backup and supervision is a dual voltage
switching power supply with a fire transfer relay that
uses any AC power source from 90-240VAC/43-63Hz
to provide up to 3 Amps @ 12VDC or 1.5 Amps @
24VDC total output.

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 3A/1.5A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with international power, operates down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including: Overcurrent, Thermal

runaway, reverse battery hookup

• Class 2 power limited output

• Eight (8) channel power distribution with access control and fire transfer relays

o Channels individually configurable to enable/disable with fire trigger
o Heavy duty relay per output with status LED, or group outputs by jumper
o Can provide dry contacts, Normally Open/Normally Closed selected via jumper
o Individual input for each output
o Power-limited, fuse-protected outputs, each with a green status LED indicator
o Main power LED indicates input power status
o Trigger LED indicates Fire Relay status
o Pluggable terminal b locks by channel and func t io n

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of: AC failure, Low ba ttery

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL Listed

SPECIFICATIO N S: AQD3-8F8R

Power Module: AQD3

Access Control Module: -8F8R

Electrical

Electrical

Dimensions

Regulatory

Mechanical

*Use gauge appropriate for output voltage and wiring distance.

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

36 VA
3 Amps @ 12VDC

1.5 Amps @ 24VDC

Continuous Output Voltage

33.5 VA

2.8 Amps @ 12VDC

1.4 Amps @ 24VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

20.0 – 27.5VDC/ 27.3 typical

Operating Fr e quency

66KHz

Onboard Power Output

One (1) Class 2 Power Limited

Universal 11-29VDC operation
Max board power use: 208mA

Output Wire Gaug e Ra ng e

14-22AWG*, 5mm spacing

Fuses

Size: 050 Standard 3AGC
Output: .5A

Relays

Input Relays: 20ma required for activation
Output Relays: contacts rated 7A 125VAC
max

Triggers

EOL: +/-60% of 2.2K ohms

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 3 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

UL 294
UL 603

ULC-S318-96

RoHS lead free

Enclosure: 14”x 9” x 3.5”

Power Board: 3.73”x 4.84” x 2”
Mounting: 3.41” x 4.5”

Module: 4.82” x 3.84” x 1.4”

Mounting: 3.4” x 4.5”
Shipping Weight: 7.65 lbs