Securitron AQD3-8C1R Specsheet

AQD3-8C1R

FEATURES:

UL and ULC Listed

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 3A/1.5A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Class 2 power limited output

• Eight (8) channel power distribution with fire relay trigger

o Channels individually selectable to ON/OFF/Always ON in res ponse to fire relay
o Power limited protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC or Reversed DC input
o Main fuse/power pull to disconnect board from input powe r
o Latching or non-latching

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

o AC failure
o Low battery
o Trigger status

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

•

Power Supply

The AQD3-8C1R power supply with battery
charger/backup and supervision is a dual voltage
switching power supply with a fire transfer relay that
uses any AC power source from 90-240VAC/43-63Hz
to provide up to 3 Amps @ 12VDC or 1.5 Amps @
24VDC total output.

SPECIFICATIO N S: AQD3-8C1R

Power Module: AQD3

Electrical

Input Voltage Operating Range

Electrical

Distribution Board: -8C1R

Regulatory

RoHS lead free

Dimensions

Shipping Weight: 8.10 lbs

Mechanical

90-240VAC
47-63Hz

Maximum Output Voltage

36 VA
3 Amps @ 12VDC

1.5 Amps @ 24VDC

Board power use with no load: 90-160mA

Maximum Ou t p ut Per Channe l

8 channels @ 1.23A/channel, Power Limited

Supervision

Trouble/Triggered Form C: 2A
Green LED per channel

Continuous Output Voltage

33.5 VA

2.8 Amps @ 12VDC

1.4 Amps @ 24VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

20.0 – 27.5VDC/ 27.3 typical

Operating Fr e quency

66KHz

Onboard Power Output

One (1) Class 2 Power Limited

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 3 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

Fuses

Output: PTC 1.23A/channel
Holds current at 130°F
Main Fuse/Power Pull: 15A ATO

Relay

Reverse Polarity Trigger:
Input: 30VDC max Voltage
Trigger: +/-20% input voltage

EOL Trigger:
Input: 2.2K ohms
Trigger: +/- 50% resistance on wire pair

Transfer Relay: 15Amps max

Enclosure: 14”x 9” x 3.5”
Power Board: 3.73”x 4.84” x 2”

Mounting: 3.41” x 4.5”
Fire Transfer Relay: 4.84” x 3.88” x .75”

Mounting: 3.41” x 4.50”

UL 294

UL 603
ULC-S318-96
ULC-5533-02