Securitron AQD3-4F Specsheet

AQD3-4F

FEATURES:

• Clean, steady, accurate power output for best performance of access control equipment

• Field-se lectable dual voltage 3A/1.5A @ 12/24VDC

• Compact modules for smaller footprint

• Universal transformer compatible with most international power

• Works in AC brownout down to 60 VAC

• Faster battery recharging under full load

• Automatic low-battery disconnect prevents deep discharge, maintains battery life

• Self-resetting circuit breakers for common conditions including:

o Overcurrent
o Thermal runaway
o Reverse battery hookup

• Class 2 power limited output

• Four-channel power distribution

o Power limited fuse protected outputs, each with a green LED status indicator
o ON/OFF power switch

• Fuse protected against surge for AC input and DC output

• SPDT Form C outputs for remote monitoring of:

o AC failure
o Low battery

• Made in USA

• MagnaCare Lifetime Replacement No Fault Warranty

• UL and ULC Listed

Power Supply

The AQD3-4F power supply with battery
charger/backup and supervision is a dual voltage
switching power supply that uses any AC power
source from 90-240VAC to provide up to 3 Amps
@ 12VDC or 1.5 Amps @ 24VDC total output.

Electrical

Electrical

SPECIFICATIONS: AQD3-4F

Power Module: AQD3

Dimensions

Regulatory

*Use gauge appropriate for output voltage and wiring distance.

Distribution Board: -4F

Mechanical

Input Voltage Operating Range

90-240VAC
47-63Hz

Maximum Output Voltage

36 VA
3 Amps @ 12VDC

1.5 Amps @ 24VDC

Continuous Output Voltage

33.5 VA

2.8 Amps @ 12VDC

1.4 Amps @ 24VDC

Voltage Range

9.8 – 13.7VDC/ 13.65 typical

20.0 – 27.5VDC/ 27.3 typical

Operating Fr e quency

66KHz

Onboard Power Output

One (1) Class 2 Power Limited

Fuse Protection

AC fuse: GMA-2 2 Amp
Battery: PTC 3 Amp
Current Overload: PTC, self-resetting
Thermal Runaway: PTC, self-resetting

Supervision/Monitoring

AC ON LED indicator: 6mA
DC ON LED indicator: 6mA
AC Fail notification: SPDT Form C 2 Amp
Low Battery: SPDT Form C 3 Amp

Output Terminal Block Rating

10A

Output Wire Gauge Range

14-28AWG*

Maximum Ou t p ut Per Channe l

4 channels @ 1A/channel

Fuses

Size: 100 Standard 3AGC
Output: 1A

Enclosure: 14”x 9” x 3.5”
Power Board: 3.73”x 4.84” x 2”

Mounting: 3.41” x 4.5”
Distribution Board: 3.75” x 2.22” x 1”

Mounting: 3.41” x 1.87”
Shipping Weight: 7.90 lbs

UL 294
UL 603

ULC-S318-96

RoHS lead free