Product Name: Almond 2014 (Wireless Router) Model Name: Almond 2014
User Manual
Securifi Ltd’s Almond Generation 2 is an easy to use 802.11bgn Wireless Router.
1. Plug in the router’s electric al power source using the power supply provid ed along with the
router. You are recommended to only use the power supply provided by the manufacturer.
2. Once Power-up, this Home Page will show on the LCD screen.
Note: Almond router does not need any computer or tablet PC for configurations, it can be
easily configured via its touch screen panel.
3. To connect your router into the Internet, follow the following steps.
3.1 Select “Wireless”
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: support@securifi.com Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com
Product Name: Almond 2014 (Wireless Router) Model Name: Almond 2014
3.2 Use the default “Name (SSID) “ and “Password“ as follow
3.3 Return to the Home Page then select “Internet”.
3.4 Select “DHCP or Cable Modem“ on your Mode of Connection.
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: support@securifi.com Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com
Product Name: Almond 2014 (Wireless Router) Model Name: Almond 2014
3.5 User may also manually configure the IP address as shown below.
4. Finish! Enjoy the wireless Internet capabilities of the router!
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: support@securifi.com Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com
Product Name: Almond 2014 (Wireless Router) Model Name: Almond 2014
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
● Reorient or relocate the receiving antenn a.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party res ponsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: support@securifi.com Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com
Product Name: Almond 2014 (Wireless Router) Model Name: Almond 2014
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: support@securifi.com Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com
Loading...