Securifi ALMOND1 Users Manual

Inside the Box

Touchscreen LCD

12V, 1A Power Adapter

1 WAN

2 LAN

Reset Button

Power Connector

Stylus

Ethernet Cable

The setup process consists of a few simple steps:

1) Connect Almond to the Internet in “Router” or “Range Extender” mode.

2) Setup your Almond Account to enable remote access for your sensors.

Router Setup

1) Unplug the AC adapter & Ethernet cables of
your Internet modem (Cable, DSL or Fiber).
If your modem has a battery remove it.

2) Wait for 1 minute. If your modem has a battery
re-insert it. Plug the AC adapter of the modem
back into the power outlet.

3) Wait for 1 minute. Plug the AC adapter of
Almond into the power outlet.

4) Follow the on the screen instructions on the
Almond’s Touch Screen.