Secure Meters HCT2 Installation Instructions

HCT2 INSTALLATION / USER
INSTRUCTIONS
Horstmann Controls Limited
Bristol
BS4 1UP
Email: sales@horstmann.co.uk
W ebsite:
Model HCT2 Cylinder Thermostat
W ith an adjust able temperature range of between 20oC and 90oC, the HCT2 Cylinder thermost at is suit able for mounting on either domestic hot water cylinders or larger diame ­ter heating pipes.
Features
A bimetallic sensor ensures accurate switching and control.
A strap is included for easy fixing to cylinder .
Inst allation Instructions The HCT2 should usually be strapped on to the cylinder at a height of about one-third up from the base - the strap should be tight for good thermal cont act. It should be adjusted to around 60oC. If set too high it may give rise to scalding, and if set too low it will increase risk of the growth of legionelle bacteria, which could lead to serious heath problems.
Specification
Operating volt age 230v 50/60 Hz Switching Capacity 16 amp s at 230V AC Contact configuration SPDT Switching Dif ferential 8
o
C (approx)
Enclosure protection IP40
Cylinder thermostat Key:
COM = Common supply CALL = Call for heat or break on rise SA T = Satisfied on rise
Loading...