Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support
SMDSIMRFV6
instructions
Thanks for your use our products, V6
produce by quad-band GMS/GPRS module with
good quality. V6 have SOS function, vibration
sensor and sound sensor trigger call back
function. The LBS tracking function, you can track
anything in anywhere. V6 also can be
installed in a car, family, compan y, stores, homes
and valuables, when it moves the alarm will
inform you, ensure that family life and property.
V6 have small size, voice clear, long time standby ,
simple operation, stable performance, remote
control, etc.
Important, please read
V6 was designed for your valuable goods
security a nd positioning, the company assume
no liability or responsibility for any behaviors
violate other individual’s privacy.
All LBS have some position error,the
reference positions indicated by this product
are for you reference only,may also have
errors.
There may be delays caused by telecom carrier
at certain circumstance. Our company is
exemption from liability to security of person
and property.
Product view:
*Photos are for reference only, please in kind
prevail.
Usage:
Please choose GSM network-based SIM card
for the product. All the functions of this product can
be set via SMS instructions.
Boot: Please take the back cover and insert the SIM
card into the card slot as directed. A quick flash of
the blue light one time indicates the power supply
has been turned on. The light will flash 3 times
about 30 seconds later to signal successful access
to the network.
Switch language
Send LAG1 change the language to Chinese.
Send LAG2 change the language to English.
Send LAG3 change the language to Russian.
Emergency contact function:
This product can bind up to five emergency
contact numbers. The five emergency contact
numbers can monitor this product remotely
and receive SOS reports.
Bind emerg ency contact numbers: send SMS
Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support
HM1 (2,3,4,5) to set the emergency contact
numbers. For instance, sending HM1 in an
SMS via phone A will set the number of phone
A for emergency contact 1. This product will
reply with an SMS:
The emergency number
1(2,3,4,5) has been set successfully!
SOS function: Press the SOS button for 5
seconds to make this product send an SMS to
the emergency contacts:
SOS! Help!
It will call
all the emergency contacts 2 times. V6 have
no speakerphone,so please use headphone
chat with emergency contacts.
Remote listening function: The product will
automatically answer calls by emergency
contacts for you to listen to sound around the
product for safety. (In response to calls by
other numbers, the product will say: The
number you dialed is not answered for the
moment so as to protect personal privacy)
AGPS function:
Send LBS in an SMS to V6 for a report of base
station code information including address
description and map site URL. (Please make
sure GPRS function is available.)
Alarm function:
Voice sensor alarm :Send GDM1 turn on voice
sensor alarm ,v6 will confirm the SMS sender
as :
network signal: strong (good, fair,poor).
Remaining power **% . Voice sensor alarm
opened!
when sound around, the product will
inform the SMS sender.
Send TIM** to set the time interval of the
voice alarm, TIM05 for 5 minutes. The V6 will
not report for voice alarm 5 minutes within the
previous one.
Send GDM2 turn off voice sensor alarm .v6
will confirm the SMS sender as :
network
signal:strong(good,fair, poor). Remaining
power **% . Removal Defenses!
Vibration sensor alarm:Send G DM3 turn on
vibration sensor alarm, v6 will confirm the
SMS sender as:
network signal: strong
(good,fair, p oor).Remaining pow er **% .
Vibration sensor opened!
whe n valuables
was moved or vibrated,V6 will inform the SMS
sender.
Send GDM4 turn off vibration sensor alarm .
you will receive a SMS as :
network signal :
strong (good, fair, poor). Remaining power
**% . Vibration sensor closed!
Change the alarm mode:
send MOD1 the alarm mode will change
as :
Alarm mode has been changed to: send
SMS first, and then call.
send MOD2 the alarm mode will change
as :
Alarm mode has be en changed to: only
call.
send MOD3 the alarm mode will change
as :
Alarm mode has been changed to: Send
SMS only.
Other function:
The current state inqui res:send DSP ca n
inquire the c urrent state of the network ,
battery life, and security alarm condition.
Low battery remind function: when t he
battery less tha n 10% ,the emergency contact
1 will receive a SMS as:
The remaining power
is low, and please recharge immediately !
Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support
Location platform
Send GON,the V6 will upload position and
machine status data to the platform every 5
minutes.Please visit
www.track.securemedevices.com,use the
IMEI number login the platform, password is
123456, please improve the user information
and change your password immediately.
Please experience trace, electronic fences,
remote alarm and emergency contacts function.
Send GOFF stop upload the data to website.
Note:This function need open GPRS a nd set
APN with SIM card.
Note:
This machine is only inserted the SIM can be
boot.
whe n charge please insure t he product is turn
on.
please put the product in network signal better
position when use.
The new machines need to be recharged for
3-4 hours before use in order to achieve the
best results, please use our distribute charger
avoid damage to the host.
Standby time: 300-400 hours. Working
time:7-10 hours.(depending on the local
network signal )
upload the data need more electricity,
stand-by time should be shorter than normal
Network type:(Quad-band)
GSM850/900MHz/DCS1800/1900MHz
Accessories:
Host 1
Charger 1
USB Charging Cable 1
Headphone 1
User manual 1
Loading...