Page 1
What you need
Suggested post-startup tasks
Task Notes Refer to...
Check for updates
and patches
If you have a support contract, you can automatically
set your Sidewinder to load and install available
patches. You can also check for patches manually, or
you can periodically check the Secure Computing
web site for available patches and other Technical
Support information.
See the “General System Tasks”
chapter of the Sidewinder
Administration Guide.
Also check
www.securecomputing.com/goto/
updates
Configure the rule
elements, rules, and
rule groups
The appliance uses a set of rules to determine the
proxies and servers that internal and external users
will be allowed to use.
See the Policy section of the
Sidewinder Administration Guide.
Set up accounts for
other administrators
You may need more than one administration user
account on the system if your site divides
administrative tasks among several administrators.
See the “General Maintenance Tasks”
chapter of the Sidewinder
Administration Guide.
Configure your
internal mail server
to route e-mail
through the
appliance
How you do this depends on the e-mail software you
use internally. If your routing directs outbound mail
to the appliance, no further configuration of your
internal mail server is required.
See your mail server’s documentation
for help.
Run the Reconfigure
Mail tool
Configure your basic mail services using the
Reconfigure Mail tool. After configuration is
complete, create the necessary objects and rules.
If you selected Transparent:
• Create two rules: one for inbound mail and one
for outbound mail.
• Use the smtp (Mail Proxy) service.
• Use two Mail (SMTP proxy) application defenses:
one for inbound traffic and one for outbound
traffic, each with direction-appropriate settings.
If you selected Secure Split SMTP Servers:
• Create two rules: one for inbound mail and one
for outbound mail.
• Use the sendmail (Sendmail Server) service.
• The rules’ destination burb must be <Any>. The
destination endpoint must also be <Any>.
• Use two Mail (Sendmail) application defenses:
one for inbound traffic and one for outbound
traffic, each with direction-appropriate settings.
See the “E-Mail” chapter of the
Sidewinder Administration Guide.
Create a
configuration
backup
An initial configuration backup is automatically
created when you first configure your appliance. If
you have made changes, now is a good time for you
to create another configuration backup. Backing up
the configuration files enables you to quickly restore
an appliance to its desired operational state. By
storing your configuration, you can:
• Have temporary storage for your Sidewinder
configuration.
• Back up your initial configurati on.
• Quickly reconfigure your system after a hardware
failure.
See the “General Maintenance Tasks”
chapter of the Sidewinder
Administration Guide.
Welcome to the Sidewinder appliance
®
— Use this Quick Start
to set up your Sidewinder appliance, version 7.0. Please refer to the
Startup Guide for comprehensive setup instructions.
What you need
Quick Start
power cord(s)
and serial cable
rack mount kit
(with rack mountable systems)
network cables
Requirements for management system:
Windows XP or 2000
1 GHz CPU
512 MB memory
CD drive
Provided in shipment Provided by you
Sidewinder appliance
(models vary)
media and
documents
Management
system -
You configure and
manage a Sidewinder
appliance from a
Windows-based
desktop or laptop
system.
— Management Tools CD
—Installation - Disk
Imaging CD
— Activation Certificate
—User Guides
— Additional materials
Technical Support Information
Web — www.securecomputing.com/goto/support
Product names used within are trademarks of their respective companies.
© 2007 Secure Computing Corporation. All rights reserved.
Part Number: 86-0946591-A
media and
documents
Management
system -
You configure and
manage a Sidewinder
appliance from a
Windows-based
desktop or laptop
system.
Page 2
Quick Start Quick Start
Plan your configuration
Install the management tools
a. Ensure that you have a Windows–based system that:
can connect by serial cable to your Sidewinder appliance
meets the minimum requirements:
— Serial Port: 9-pin serial port
— OS: MS Windows 2000 Workstation, 2000 Server,
or XP Pro
— CPU: Intel (1 GHz minimum)
— Memory: 512 MB minimum
— Drives: 300 MB of available disk space; CD–ROM drive
— Monitor: 1024 x 768 or higher
— Browser: Internet Explorer 6 or later; Netscape 4.x or later; Mozilla Firefox 1.0 or later
b. Using the Management Tools CD, install the
management tools software on that workstation.
Sidewinder Management Tools
a. Connect the Sidewinder G2’s power plug and two network cables.
b. Power on the Sidewinder G2.
c. Attach a serial cable from the Sidewinder G2 to the Windows system.
d. Run the Quick Start Wizard by selecting:
Programs > Secure Computing > Sidewinder G2 Admin Console 3.0 >
Quick Start Wizard
Sidewinder
Quick Start Wizard
Configure the Sidewinder appliance
a. Detach the serial cable.
b. Move the Windows system to your work space
and make sure it is networked to your Sidewinder
appliance’s internal interface.
c. Start the Admin Console and connect to the
Sidewinder appliance.
d. Use the table titled “Suggested post-startup
tasks” on the back of this fold out as a starting
point for further policy configuration. Complete
configuration details are provided in the online
help and the Sidewinder G2 Administration Guide.
Start managing your Sidewinder appliance
Admin Console
a. Refer to the following resources:
Startup Guide (in product package)
Release Notes (in product package)
b. Define your integration schedule.
Loading...