Secura QLT25 Instruction Manual

Download

Page 1

QLT

If you have any questions along the way, just give us a call.

INSTRUCTION MANUAL

We’ll Make It Stress-Free

1-800-359-5520 We’re ready to help!

Scan for easy install video

san.us/1144

Page 2

CAUTION: IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS

Before getting started, let’s make sure this mount is perfect for you!

Does your TV

(including accessories)

weigh MORE than

110 lbs. (49.8 kg)?

What is your

wall made of?

Do you have

all the tools needed?

Ready to begin?

CAUTION:

No? Perfect – you may continue.

110 lbs.

(49.8 kg)

Perfect!

Tape

Measure

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at

Yes? This mount is NOT compatible.

Visit secura-av.com or call 1-800-359-5520

(UK: 0800 056 2853) to ﬁ nd a compatible mount.

Drywall with

wood studs?

drywall alone

Pencil Level

CAUTION:

DO NOT

install into

Screw

driver

Electric

Drill

Perfect!

1/2 in.

(13 mm)

Socket

Wrench

1-800-359-5520 (UK: 0800 056 2853).

Wood Stud Install

indicated. This mounting system is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the mount and its accessories, causing possible injury.

Solid concrete or

concrete block?

Stud

Finder

Awl

DO NOT exceed the maximum weight

Unsure?

Call Customer Service: 1-800-359-5520 (UK: 0800 056 2853)

3/8 in.

(10 mm)

Masonry

Concrete Install

Drill Bit

Hammer

7/32 in.

(5.5 mm) Wood

Drill Bit

CAUTION: Avoid potential personal injury or property damage!

● This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

● The wall must be capable of supporting ﬁ ve times the weight of the TV and mount combined

● Do not use this product for any purpose not explicitly speciﬁ ed by manufacturer

● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Page 3

Dimensions

TV INTERFACE

15.98in

[406mm]

7.87in

[200mm]

23.62in

[600mm]

.59in

[15mm]

WALL PLATE

24.17in

[614mm]

8.03in

5.07in

[129mm]

25.59in

[650mm]

6.22in

[158mm]

[204mm]

8.74in

[222mm]

.35in

[9mm]

16.06in

[408mm]

25.59in

[650mm]

FULLY ASSEMBLED MOUNT

1.81in

[46mm]

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

3.60in

[91.3mm]

3-D

SIDE VIEW - EXTENDED

8°

10°

5°

SIDE VIEW - RETRACTED

16.93in

[430mm]

1.26in

[32mm]

Page 4

Parts and Hardware

M6/M8

M6 x 12mm M6 x 35mm

M8 x 16mm M8 x 35mm

M8 x 20mm

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts

are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

Parts and Hardware for STEP 1

TV Brackets

02 x4 05 x4

01 x2

TV Screws

04 x4 06 x403 x4

Washers

07 x4

Spacers

22mm

08 x4

Page 5

5/16 x 2¾ in.

5/16 in.

Fischer UX 10 x 60R

Concrete Anchors

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

Parts and Hardware for STEP 2

Lag Bolts

Wall Plate

09 x1

10 x4

Lag Bolt Washers

11 x4

12 x4

Page 6

STEP 1 Attach Brackets to TV

1.1 Select Angle of TV Tilt

Using the preattached angle brackets, TV can be set to either a 10° or 8° tilt.

10° Tilt 8° Tilt

Page 7

5° Tilt

For 5° tilt, remove the preattached angle brackets, rotate the brackets as shown and reattach the brackets.

For no tilt, remove the preattached angle brackets.

0° Tilt

Page 8

1.2 Select TV

Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M6, or M8) to use.

Screw Diameter

M6 M8

1.3 Select TV

If your TV has a flat back AND you want your TV closer to the wall, use the shorter screws (a).

Use the spacers and longer screws (b) to accommodate:

● Round/irregular back TVs

● TVs with inset mounting holes

● Extra space needed for cables

FLAT BACK ROUND BACK CABLESINSET HOLES

Screw Length

Standard configurations are shown. For special applications, or if you are uncertain about your hardware selection, contact Customer Service at 1-800-359-5520.

CAUTION:

Verify adequate thread engagement with your screw/ washer/spacer combination AND TV bracket.

- Too short will not hold the TV.

- Too long will damage the TV.

Too Short

Correct

Too Long

Page 9

1.4 Attach TV Brackets

Ensure that your brackets are level and centered on the back of the TV. Install using the TV screw/washer/spacer conﬁ guration you selected for your TV.

CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough

to secure the TV bracket to the TV. DO NOT overtighten the screws.

IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.

Flat Back

02 030504

Round Back / Extra Space

Page 10

STEP 2A Attach Wall Plate to Wall

Wood Stud Option

CAUTION: Avoid potential personal injury or property damage!

● Drywall covering the wall, must not exceed 5/8 in. (16 mm)

● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)

● Minimum horizontal space between fasteners: 16 in. (406 mm)

● Stud center must be verified

1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the wall plate 09 at your desired height and line up the holes with your stud center line. Level the wallplate and mark the hole locations.

Max. 5/8 in.

(16 mm)

16 – 24 in.

(406 – 610 mm)

Page 11

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 2¾ in. (70 mm). Be sure to drill into the center of the studs.

4. Install wall plate

using four lag bolts 10 and four washers

. Tighten the lag bolts only until they are pulled firmly against the wall plate.

CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.

Go to STEP 3 on PAGE 14.

in. (70 mm)

2¾

7/32 in.

(5.5 mm)

Page 12

STEP 2A Attach Wall Plate to Wall

CAUTION: Avoid potential personal injury or property damage!

Solid Concrete or Concrete Block Option

● Mount the wall plate assembly

● Minimum solid concrete thickness: 8 in. (203 mm)

● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)

● Minimum horizontal space between fasteners: 16 in. (406 mm)

1. Position the wall plate

2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.

directly onto the concrete surface.

on the wall at your desired height. Level the wall plate and mark the hole locations.

3 in. (75 mm)

3/8 in.

(10 mm)

Page 13

3. Insert four anchors

CAUTION: Be sure the anchors are seated flush with the concrete surface.

4. Install wall plate

using four lag bolts 10 and washers

. Tighten the lag bolts only until they are pulled firmly against the wall plate.

CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.

Page 14

STEP 3 Attach TV to Wall Plate

Hang TV/bracket assembly onto wall plate

IMPORTANT: You will hear an audible click when the TV bracket is securely fastened to the wall plate.

HEAVY! You may need assistance with this step.

using predetermined angle (Step 1.1 pages 6-7), then lower the bottom of the TV in place.

Page 15

Adjustments

HEAVY! You may need assistance with this step.

To remove the TV from the wall plate, pull down on the release straps, and then lift the TV up and out away from the wall.

Page 16

Thank you for choosing Secura! Please take a moment to let us know how we did:

Email us: info@secura-av.com

Call us: 1-800-359-5520

UK: 0800 056 2853

Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.

Milestone AV Technologies • 6436 City West Parkway • Eden Prairie, MN 55344 USA 6901-002595 00