FCC RF TEST REPORT
http://www.emc2000.co.kr
Appendix 6.
Report No.: EMC-FCC-R0059
User manual
EMC compliance Ltd.
480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390,Korea
82 31 336 9919 (Main) 82 31 336 4767 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
SM03 Operation Manual
Thank you for using Seculine’s SM03. This manual explains how to use SM03. Please
read carefully this manual so as to be fully aware of features of the product
1. Functions of the product
SM03 is a 2.4GHz RF signal transmitter and receiver module
1. 2.4GHz wireless signal transmitter and receiver
2. Input and output signal connector
3. Status check button
4. Status check display
2. Interface connector
Input and output signal is connected to interface connector. And power is supplied by
the interface connector, too.
1. Signal input that is transmitted
2. Signal output that is received
3. Operation power input
3. Installation to target system
1. Target system should have a connector that can match with SM03 signal interface
connector mechanically and electrically
2. Install SM03 on target system by connecting signal interface connector.
4. Transmitter operation check
1. Push the check status button.
2. If SM03 module is working properly, status check display LED brinks
5. Signal transmitter and receiver operation check
1. Prepare multiple sets that are installed SM03 module.
2. Push status check button of a set.
3. If status check display LED blink of other sets properly, then RF signal transmit
and receive operation are working properly.
Specifications
External power Receiver: DC 5V (AC Power adapter)
AC Power Adapter Input: AC 100V ~ 240V, Output: DC 5V
Frequency 2.4 Ghz
Caution : Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
If the FCC ID is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed module. This
exterior label shall be: "Contains FCC ID: XMZSM03”
Loading...