SWIVEL GLIDER GUIDE
Back Support
Quality Upholstery Material
95% Polyester and 5% linen
Thick pillow cushioning
CONNECTOR
Chair Base
Genuine Leggett and Platt mechanism (With Warranty)
Metal ball bearings provide a smooth gliding motion
High-quality hardwood and composites construction
CONNECTOR
TAB
Assembly
In order to connect the back su pport with the chair base, you
must a lign the back support connector with chair base con nector.
The cha ir base will go inside the back support as shown . Press
down until you hear a click. Once it is properly secured, you will
not be able to lift it ba ck up.
disassemble
To remove the back su pport, you must pull up on the tab to the
front of the back support connector. Once pulled, you will be
able to lift the back support up from the base.
Finishing Touch
SWIVEL GLIDER GUIDE
To finish with the assembly of your chair, you will need to
pull down the flap of the back su pport and match it to the
three strips of velcro on the chair base. One on each side
and one di rectly under the chair base.
Cleaning Tips
Back support cushion can be removed in order to wash the fabric cover.
In order to remove the cushion, unzip the two zippers a nd pull cushion
from velcro bottom.
TOP OF CHAIR
The inside cushions can be
removed to wash the cover.
Loading...